p.1 #1X100V X100VI and X70 - 3D printable 49mm filter adapters
Freshly designed 3D printable model of 49mm adapter ring with angular geometry for Fuji X100V / X100VI cameras (and previous X100 models).
I'm attaching slim version of B+W brass framed filter to keep setup ultra-compact. The 3D model can be downloaded for free non-commercial use from here.here
p.1 #6X100V X100VI and X70 - 3D printable 49mm filter adapters
I got mine today from Shapeway. There was no notification of shipment.
Order date 5/10
Ship date 5/17
Received 5/20
Not bad. Black color matches to yours. It is a little tight but screws. Thank you very much. Now I want to slimmer X70 version too...
yukosteel wrote:
Freshly designed 3D printable model of 49mm adapter ring with angular geometry for Fuji X100V / X100VI cameras (and previous X100 models).
I'm attaching slim version of B+W brass framed filter to keep setup ultra-compact. The 3D model can be downloaded for free non-commercial use from here.here
May 20, 2024 at 07:54 PM
RoamingScott
Offline
Activity
[X]
Details
p.1 #7X100V X100VI and X70 - 3D printable 49mm filter adapters
Correct. You need a standoff because the lens moves out to focus.
Jeffrey wrote:
Is this needed because the x100VI does not have filter threads on the end of the lens?
p.1 #8X100V X100VI and X70 - 3D printable 49mm filter adapters
serhan_ wrote:
It is a little tight but screws. Thank you very much. Now I want to slimmer X70 version too...
One thing to note about X70 version, when printing few modifications I noticed that same thread printed for X70 fits even more tight, so recommended print settings are increasing X and Y dimension for 3D model by 101.5% in slicer settings. In that way rings is fitting X70 much easier.
Well I'm using FDM type printer, and it has slight expansion of material depending on calibration.
Currently I'm using 52>49mm 7mm wide ring on X70 and 49>49 7mm ring on X100V (not using macro range anyway, so prefer slimmer look).
p.1 #9X100V X100VI and X70 - 3D printable 49mm filter adapters
I ordered 3D print from Shapeway online, so I have to check if I can change the settings when I order. I might order that with m lens filter covers. Thanks.
yukosteel wrote: serhan_ wroteIt is a little tight but screws. Thank you very much. Now I want to slimmer X70 version too...One thing to note about X70 version, when printing few modifications I noticed that same thread printed for X70 fits even more tight, so recommended print settings are increasing X and Y dimension for 3D model by 101.5% in slicer settings. In that way rings is fitting X70 much easier.
Well I'm using FDM type printer, and it has slight expansion of material depending on calibration.
Currently I'm using 52>49mm 7mm wide ring on X70 and 49>49 7mm ring on X100V (not using macro range anyway, so prefer slimmer look).