Recently, I extracted two of my OLD Nikon film bodies from my photo equipment boneyard: an F100 and an N90S. Both cameras were, at first, reluctant to spring back to life and for similar, battery compartment related reasons. Let's consider the N90S:
Upon initial inspection, I discovered two issues. First, as is to be expected with these cameras, the rubbery coating on the film back had degraded and become extremely sticky. Second, the original battery holder had become brittle over the years and cracked (also common with the N90S).
As replacement N90S battery holders are next to impossible to find, I did the next best thing and purchased an MB-10 battery grip from KEH. The grip is perfect and, with it attached, the camera did indeed come back to life. Here's the camera's handsome face:
Unfortunately, the back is not as handsome. Internet wisdom recommended an energetic application of alcohol to remove the sticky rubber residue from the camera's back. I went this route and was able to remove the sticky part but eventually ran out of motivation so some of the original back covering remains:
Yes, I know, it's ugly. However, the unattractiveness in no way adversely affects the operation of the camera and replacing the back with a seemingly readily available data back would restore the camera's loveliness.
I ran a sacrificial roll of film through the camera and all functions seemed to work as expected. Shutter seemed fine and rewind worked as well. A brief test of AF with a borrowed screwdriver type Nikon lens also worked just fine.
What stopped me dead in my tracks and put an end to my trip down memory lane was the realization of what film costs these days not to mention the cost of processing. $9.99 for one roll of Tri-X and, gulp, $21.99 for one roll of Ektachrome? YIKES! Not happening.
So, if anyone would like to adopt a fully functional and only slightly cosmetically challenged Nikon N90S, a mere $40 shipped and Paypal'ed will make it happen.
If you've read this far. Treat yourself to a cookie. You deserve it.