Home · Register · Join Upload & Sell

Moderated by: Fred Miranda
Username  

  New fredmiranda.com Mobile Site
  New Feature: SMS Notification alert
  New Feature: Buy & Sell Watchlist
  

FM Forums | Leica & Alternative Gear | Join Upload & Sell

  

Leica Q2 does not save the focusing point size in Field mode

  
 
Fred Miranda
Offline
Admin
Upload & Sell: On
p.1 #1 · p.1 #1 · Leica Q2 does not save the focusing point size in Field mode


I'm having difficulty maintaining the smaller size as the focusing point on the Q2's "Field".

Even with Firmware 5.0, Leica hasn't addressed this issued. The focusing point (Field) always goes back to the "medium size" instead of staying where you set it. So, every time you turn on the camera, you have to change it to the small or large size if you want that. Saving the small or large size as a custom setting doesn't work for me because it goes back to the medium size when I turn off the camera. It's not a huge issue, but it's definitely not ideal in my opinion.

Thank you in advance.



Jun 23, 2023 at 01:53 PM
flash
Offline
• • • • •
Upload & Sell: On
p.1 #2 · p.1 #2 · Leica Q2 does not save the focusing point size in Field mode


My camera remembers the set size.

Maybe reset the camera or try reload the firmware.

Gordon



Jun 24, 2023 at 05:09 AM
Fred Miranda
Offline
Admin
Upload & Sell: On
p.1 #3 · p.1 #3 · Leica Q2 does not save the focusing point size in Field mode


flash wrote:
My camera remembers the set size.

Maybe reset the camera or try reload the firmware.

Gordon


Interesting Gordon. Are you 100% sure of this?
I did a reset this morning but get the same results.



Jun 24, 2023 at 12:09 PM
Mark Sisco
Offline
• • • •
Upload & Sell: Off
p.1 #4 · p.1 #4 · Leica Q2 does not save the focusing point size in Field mode


Fred, I’m getting the same results as Gordon.


Jun 24, 2023 at 03:19 PM
Fred Miranda
Offline
Admin
Upload & Sell: On
p.1 #5 · p.1 #5 · Leica Q2 does not save the focusing point size in Field mode


Mark Sisco wrote:
Fred, I’m getting the same results as Gordon.


Thanks for confirming this Mark. I sent an email to Leica support. Somehow it's not working for me.



Jun 24, 2023 at 04:04 PM
 


Search in Used Dept. 

flash
Offline
• • • • •
Upload & Sell: On
p.1 #6 · p.1 #6 · Leica Q2 does not save the focusing point size in Field mode


Fred Miranda wrote:
Interesting Gordon. Are you 100% sure of this?
I did a reset this morning but get the same results.


Yep. !00%.

Gordon




Jun 24, 2023 at 05:47 PM
gordec
Offline
• • •
Upload & Sell: On
p.1 #7 · p.1 #7 · Leica Q2 does not save the focusing point size in Field mode


Mine reverts to medium size too. It doesn't bother me, but I can't make it stick even if I save custom profile.


Jun 24, 2023 at 09:06 PM
gordec
Offline
• • •
Upload & Sell: On
p.1 #8 · p.1 #8 · Leica Q2 does not save the focusing point size in Field mode


Fred Miranda wrote:
I'm having difficulty maintaining the smaller size as the focusing point on the Q2's "Field".

Even with Firmware 5.0, Leica hasn't addressed this issued. The focusing point (Field) always goes back to the "medium size" instead of staying where you set it. So, every time you turn on the camera, you have to change it to the small or large size if you want that. Saving the small or large size as a custom setting doesn't work for me because it goes back to the medium size when I turn off the camera. It's not a huge issue, but it's
...Show more

I think I figured it out. Check to see if you have AF Mode under FN or quick access. Make sure your AF Mode in the Menu system and in the quick access are both under Field. Then adjust spot size. It should now stick. When mine wasn't stick, the AF Mode in quick access was under Field but under the menu system it was Face/Eye.



Jun 24, 2023 at 09:13 PM
Fred Miranda
Offline
Admin
Upload & Sell: On
p.1 #9 · p.1 #9 · Leica Q2 does not save the focusing point size in Field mode


gordec wrote:
I think I figured it out. Check to see if you have AF Mode under FN or quick access. Make sure your AF Mode in the Menu system and in the quick access are both under Field. Then adjust spot size. It should now stick. When mine wasn't stick, the AF Mode in quick access was under Field but under the menu system it was Face/Eye.


That was it. Thank you Sean!

It's worth mentioning that Face/Eye always reverts to 'medium' which is not a big deal.



Jun 25, 2023 at 12:42 AM







FM Forums | Leica & Alternative Gear | Join Upload & Sell

    
 

You are not logged in. Login or Register

Username       Or Reset password



This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.