Desmolicious wrote: BruceRH wroteFred Miranda wrotegiustiniani wroteThanks a lot! Fred Miranda wrotegiustiniani wroteFred,
Could you measure the external diameter of the lens front? I'm planning on using it without a hood or filter as you mentioned. There is a lens cap brand called Kaiser that makes push on caps for almost every lens diameter, but they tell us to measure the external diameter not the filter thread diameter.It's 36mm from outer edge to edge. I think if you find a cap that fits this dimension it may work.You're welcome. The Leica Summaron-M 28mm f/5.6 has the same filter thread size (34mm), so its push on cap may fit the Voigtlander 40mm f/2.8 Heliar.
A third party A36 metal cap may work as well. Here is one for ~$6: https://www.ebay.com/itm/294437172554 (silver) https://www.ebay.com/itm/293376668550 (black)I ordered 2 of these in Black. They arrived today and while they look nice, neither one fits my 40/2.8. I have a plastic 36mm push on cap that fits fine. Maybe the plastic has just enough give where the metal does not.Get the cheapo Tiffen filter. Quoting myself in this thread:
Desmolicious wroterscheffler wroteIf you don't plan to continue using the Tiffen filter, perhaps pop the glass out and use the filter ring to hold the knockoff lens cap?The glass was really easy to remove from the Tiffen filter - just unscrew the retaining ring. Which is good because it can be put back in if I ever want that..
The upside is the Tiffen filter ring acts as a mini lenshood. Very reminiscent of what Leica offered for the 50 2.8M. Only bummer is it has Tiffen written on it, and that other stuff. Edit - ugly white text covered up with black felt marker.
What do you think of the Tiffen 34mm UV filter? Have you tested it for any image quality issues when shooting against the light? I'm thinking of buying one today, and my plan is to remove the glass and attach it directly inside the provided lens hood.
Fred Miranda wrote: Desmolicious wroteBruceRH wroteFred Miranda wrotegiustiniani wroteThanks a lot! Fred Miranda wroteIt's 36mm from outer edge to edge. I think if you find a cap that fits this dimension it may work.You're welcome. The Leica Summaron-M 28mm f/5.6 has the same filter thread size (34mm), so its push on cap may fit the Voigtlander 40mm f/2.8 Heliar.
A third party A36 metal cap may work as well. Here is one for ~$6: https://www.ebay.com/itm/294437172554 (silver) https://www.ebay.com/itm/293376668550 (black)I ordered 2 of these in Black. They arrived today and while they look nice, neither one fits my 40/2.8. I have a plastic 36mm push on cap that fits fine. Maybe the plastic has just enough give where the metal does not.Get the cheapo Tiffen filter. Quoting myself in this thread:
Desmolicious wroterscheffler wroteIf you don't plan to continue using the Tiffen filter, perhaps pop the glass out and use the filter ring to hold the knockoff lens cap?The glass was really easy to remove from the Tiffen filter - just unscrew the retaining ring. Which is good because it can be put back in if I ever want that..
The upside is the Tiffen filter ring acts as a mini lenshood. Very reminiscent of what Leica offered for the 50 2.8M. Only bummer is it has Tiffen written on it, and that other stuff. Edit - ugly white text covered up with black felt marker.
https://live.staticflickr.com/65535/52029800619_1daed37dbd_b.jpgWhat do you think of the Tiffen 34mm UV filter? Have you tested it for any image quality issues when shooting against the light? I'm thinking of buying one today, and my plan is to remove the glass and attach it directly inside the provided lens hood.
I stopped using the Tiffen because it is no good unless the sun is behind your back. At the time I bought it, only this and the single coat Heliopan was available. In the decent filter comparison test I read, the Heliopan was as bad as the Tiffen! But apparently the multi coat Heliopan is now in stock.
With the Tiffen filter I removed the glass to just use it as a compact lens hood.
it's worth mentioning that the Voigtlander 40mm f/2.8 is multi-coated and did very well in regards to ghosting and veiling flare even with the sun in the frame. I don't see any ghosting or loss in contrast...I picked up an uncoated Tiffen UV filter for this lens (the only thing available) for $8. I did that partially out of habit, and also because a lot of times it is windy at the beach and I do a lot of stuff down there. The much more expensive Heliopan is out of stock.
The pics I took were either in overcast conditions, or had the sun behind my back so little chance of image degradation. I think though I will be going w/o the filter as this test shows both the Tiffen and Heliopan are frankly cr@p. And seeing how you demonstrate how excellent this lens is w/ re to flare, it will be a shame to give that all up.
Desmolicious wrote: Desmolicious wroteFred Miranda wrote..
it's worth mentioning that the Voigtlander 40mm f/2.8 is multi-coated and did very well in regards to ghosting and veiling flare even with the sun in the frame. I don't see any ghosting or loss in contrast...I picked up an uncoated Tiffen UV filter for this lens (the only thing available) for $8. I did that partially out of habit, and also because a lot of times it is windy at the beach and I do a lot of stuff down there. The much more expensive Heliopan is out of stock.
The pics I took were either in overcast conditions, or had the sun behind my back so little chance of image degradation. I think though I will be going w/o the filter as this test shows both the Tiffen and Heliopan are frankly cr@p. And seeing how you demonstrate how excellent this lens is w/ re to flare, it will be a shame to give that all up.
So thanks Fred for these tests and showing me not to mess with my lens!Bump for the UV filter test results, which showed how the Tiffen and Heliopans performed.
Fred Miranda wrote: Desmolicious wroteDesmolicious wroteFred Miranda wrote..
it's worth mentioning that the Voigtlander 40mm f/2.8 is multi-coated and did very well in regards to ghosting and veiling flare even with the sun in the frame. I don't see any ghosting or loss in contrast...I picked up an uncoated Tiffen UV filter for this lens (the only thing available) for $8. I did that partially out of habit, and also because a lot of times it is windy at the beach and I do a lot of stuff down there. The much more expensive Heliopan is out of stock.
The pics I took were either in overcast conditions, or had the sun behind my back so little chance of image degradation. I think though I will be going w/o the filter as this test shows both the Tiffen and Heliopan are frankly cr@p. And seeing how you demonstrate how excellent this lens is w/ re to flare, it will be a shame to give that all up.
So thanks Fred for these tests and showing me not to mess with my lens!Bump for the UV filter test results, which showed how the Tiffen and Heliopans performed.
What is actually excellent about that test is it directly compares pics with and w/o the filter. So instead of reading about light transmission values, you plainly see how things get bolloxed up.
I think I’ve found my preferred solution, which is the Heliopan 34-39mm step-up ring combined with a 39mm B+W Master clear on the end. It’s just a tiny bit narrower and shorter than the Voigtlander hood by itself. Edge of the B+W matches the end ring and aperture ring style of the lens. When comparing against a 34mm filter plus the Voigtlander hood, it’s considerably shorter. Tested for any impact to corner IQ stopped down at infinity, and there is none.
I also bought and received the Heliopan 34mm SH-PMC (multicoated) filter, but I’m not even bothering to try it out given how well the step-up ring plus filter combo works.
Step-up plus filter versus the Voigtlander hood
Versus UV with Voigtlander hood
Lettering looks better than B&H’s product photo showed
Fred Miranda wrote: Desmolicious wroteDesmolicious wroteFred Miranda wrote..
it's worth mentioning that the Voigtlander 40mm f/2.8 is multi-coated and did very well in regards to ghosting and veiling flare even with the sun in the frame. I don't see any ghosting or loss in contrast...I picked up an uncoated Tiffen UV filter for this lens (the only thing available) for $8. I did that partially out of habit, and also because a lot of times it is windy at the beach and I do a lot of stuff down there. The much more expensive Heliopan is out of stock.
The pics I took were either in overcast conditions, or had the sun behind my back so little chance of image degradation. I think though I will be going w/o the filter as this test shows both the Tiffen and Heliopan are frankly cr@p. And seeing how you demonstrate how excellent this lens is w/ re to flare, it will be a shame to give that all up.
So thanks Fred for these tests and showing me not to mess with my lens!Bump for the UV filter test results, which showed how the Tiffen and Heliopans performed.
highdesertmesa wrote:
I think I’ve found my preferred solution, which is the Heliopan 34-39mm step-up ring combined with a 39mm B+W Master clear on the end. It’s just a tiny bit narrower and shorter than the Voigtlander hood by itself. Edge of the B+W matches the end ring and aperture ring style of the lens. When comparing against a 34mm filter plus the Voigtlander hood, it’s considerably shorter. Tested for any impact to corner IQ stopped down at infinity, and there is none.
I also bought and received the Heliopan 34mm SH-PMC (multicoated) filter, but I’m not even bothering to try it out given how well the step-up ring plus filter combo works. ...Show more →
The included hood cap may fit since it's 39mm. Did you try it?
I just received the Tiffen 34mm UV and just by looking at the not so clear glass, I can tell it will not provide high IQ.
Fred Miranda wrote: highdesertmesa wroteI think I’ve found my preferred solution, which is the Heliopan 34-39mm step-up ring combined with a 39mm B+W Master clear on the end. It’s just a tiny bit narrower and shorter than the Voigtlander hood by itself. Edge of the B+W matches the end ring and aperture ring style of the lens. When comparing against a 34mm filter plus the Voigtlander hood, it’s considerably shorter. Tested for any impact to corner IQ stopped down at infinity, and there is none.
I also bought and received the Heliopan 34mm SH-PMC (multicoated) filter, but I’m not even bothering to try it out given how well the step-up ring plus filter combo works.The included hood cap may fit since it's 39mm. Did you try it?
I just received the Tiffen 34mm UV and just by looking at the not so clear glass, I can tell it will not provide high IQ.
Bummer about the Tiffen. Every filter I’ve ordered from Amazon was either fake or someone had taken the original, put back in an unbranded no-name filter, then returned it only for it to get resold as new to me.
The original hood is too wide to fit the 34-39 step-up plus filter combo. I’m going to use it without a cap.
highdesertmesa wrote: Fred Miranda wrotehighdesertmesa wroteI think I’ve found my preferred solution, which is the Heliopan 34-39mm step-up ring combined with a 39mm B+W Master clear on the end. It’s just a tiny bit narrower and shorter than the Voigtlander hood by itself. Edge of the B+W matches the end ring and aperture ring style of the lens. When comparing against a 34mm filter plus the Voigtlander hood, it’s considerably shorter. Tested for any impact to corner IQ stopped down at infinity, and there is none.
I also bought and received the Heliopan 34mm SH-PMC (multicoated) filter, but I’m not even bothering to try it out given how well the step-up ring plus filter combo works.The included hood cap may fit since it's 39mm. Did you try it?
I just received the Tiffen 34mm UV and just by looking at the not so clear glass, I can tell it will not provide high IQ.Bummer about the Tiffen. Every filter I’ve ordered from Amazon was either fake or someone had taken the original, put back in an unbranded no-name filter, then returned it only for it to get resold as new to me.
The original hood is too wide to fit the 34-39 step-up plus filter combo. I’m going to use it without a cap.
Yep, it looks used too. Regarding the hood, perhaps you can add a thicker felt on it.
Fred Miranda wrote: highdesertmesa wroteFred Miranda wrotehighdesertmesa wroteI think I’ve found my preferred solution, which is the Heliopan 34-39mm step-up ring combined with a 39mm B+W Master clear on the end. It’s just a tiny bit narrower and shorter than the Voigtlander hood by itself. Edge of the B+W matches the end ring and aperture ring style of the lens. When comparing against a 34mm filter plus the Voigtlander hood, it’s considerably shorter. Tested for any impact to corner IQ stopped down at infinity, and there is none.
I also bought and received the Heliopan 34mm SH-PMC (multicoated) filter, but I’m not even bothering to try it out given how well the step-up ring plus filter combo works.The included hood cap may fit since it's 39mm. Did you try it?
I just received the Tiffen 34mm UV and just by looking at the not so clear glass, I can tell it will not provide high IQ.Bummer about the Tiffen. Every filter I’ve ordered from Amazon was either fake or someone had taken the original, put back in an unbranded no-name filter, then returned it only for it to get resold as new to me.
The original hood is too wide to fit the 34-39 step-up plus filter combo. I’m going to use it without a cap.Yep, it looks used too. Perhaps you can add a thicker felt on it.
The original cap is unfortunately much too wide to fit even with thicker felt. The original hood alone almost fits over the step-up combo! Maybe several layers of felt would work, but I don’t want to mess up the original felt with adhesive from new felt, either.
Fred Miranda wrote: Desmolicious wroteOldwino wroteDesmolicious wroteWhich one matches the lens and camera better?Both Leitz and both look marvelous on the camera!I’d then take one shot w the 35, one with the 50 and compare your framing results.
In my ‘tests’ the Cv 40 is quite a bit wider then my Rollei Sonnar 40. And the results do seem closer to 35mm coverage.Using the 57-degree angle of view, I determined the focal length of the Heliar 40/2.8 to be approximately 40.75mm. I charted these values, resulting in the following representation. The green line corresponds to the Heliar 40.75mm focal length, and it falls almost precisely between the 35mm and 50mm frames.
Discovered today that the 1.3x digital zoom (crop) function on the M11 makes an image with the CV 40 2.8 that matches the 50mm frame lines exactly and the 1.8x zoom is exactly 75mm. Can't get that exact match up starting with any other focal length. Only problem (if you'd call it that) is the digital zoom when selected in the menu only is applied in live view. If I shoot with the rangefinder, the zoom is not applied. I may email Leica and ask for an option in firmware to allow the crop to function while using the rangefinder. I'd love to sometimes leave the camera set to 1.3x zoom and shoot this like an APS-H sensor with a 50mm equivalent FOV while using the rangefinder.
I have the 40mm Heliar. It seems much closer to 35mm than to 50mm. I'm considering filing the activation tab to bring up the 35mm frame lines. Are the 28 and 40 CV lenses far enough apart to justify both. Seems you and Fred feel they are.
Rob L wrote:
I have the 40mm Heliar. It seems much closer to 35mm than to 50mm. I'm considering filing the activation tab to bring up the 35mm frame lines. Are the 28 and 40 CV lenses far enough apart to justify both. Seems you and Fred feel they are.
As Fred illustrated, the CV 40 FOV falls exactly between the 35 and 50 frame lines. I would try manually engaging the 35mm frame lines when shooting the 40 to be sure that's what you want. I find it more difficult to estimate a crop from 35mm than to estimate a wider border from 50mm. + Using 50mm frame lines is less likely to be destructive (by cropping out something I needed) if I get my estimation wrong. Something that does work for me – framing with the 50 and flicking the frame lines lever to see 35 really quick – much easier to verify the 40 FOV that way as it sits right between 35 and 50.
The 28 Color Skopars are small enough to carry with the 40 without a second thought. I see them more as a "pick one" for a few hours or all day versus switching back and forth. Probably a 21 or a 24mm is a more logical choice than 28 to pair with 40, and it would have the benefit of continuing to require me to estimate a larger FOV than is seen in the frame lines.
highdesertmesa wrote: Rob L wroteI have the 40mm Heliar. It seems much closer to 35mm than to 50mm. I'm considering filing the activation tab to bring up the 35mm frame lines. Are the 28 and 40 CV lenses far enough apart to justify both. Seems you and Fred feel they are.As Fred illustrated, the CV 40 FOV falls exactly between the 35 and 50 frame lines. I would try manually engaging the 35mm frame lines when shooting the 40 to be sure that's what you want. I find it more difficult to estimate a crop from 35mm than to estimate a wider border from 50mm. + Using 50mm frame lines is less likely to be destructive (by cropping out something I needed) if I get my estimation wrong. Something that does work for me – framing with the 50 and flicking the frame lines lever to see 35 really quick – much easier to verify the 40 FOV that way as it sits right between 35 and 50.
The 28 Color Skopars are small enough to carry with the 40 without a second thought. I see them more as a "pick one" for a few hours or all day versus switching back and forth. Probably a 21 or a 24mm is a more logical choice than 28 to pair with 40, and it would have the benefit of continuing to require me to estimate a larger FOV than is seen in the frame lines....Show more →
The Type I 28mm and 40mm lenses make a great pair due to their similar appearance and mechanics. However, I personally lean towards using a combination like 28/50 for a two-lens outing or just carrying a 35mm lens.
Fred Miranda wrote:
Is the 40/2.8 hood the same length as the 28/2.8 Heliar?
I discovered the answer to my own question, and in case someone else is curious about this, you can use the lens hoods interchangeably between the CV 28/2.8 Type I and 40/2.8 Heliar lenses. Same size and length.
Desmolicious wrote: Renes wroteDesmolicious wroteggweci wroteThis looks like a great lens, love the images posted here and the compact size. Considering it for my m240.
Have also long desires the Leica/Minolta 40mm f2 for similar reasons.
Between the two, outside of the extra stop of the latter, which would you all recommend? Main use would be family, travel, everyday scenarios.The Summicron handles much better as the aperture ring does not move w the focus. So will be faster to use for pics of family. The CV has phenomenal flare protection, while the cron basically is cr@p for that.
The CV will basically be in new condition, while every Cron 40 I’ve seen - including mine- will have a lot of wear.If Summicron 40/2 had MC it would be strong competitor especially for landscape which sharpness probably outperforms at f8-11 any 40mm Voigtlander... I have heard such claim. Would you agree with it?
What about CV Ultron 40mm f1.4 and how compares to this Heliar at the same f/stop?I have both the 40mm Summicron and the CV 40 2.8. The CV is sharper if that matters but you really have to look for it. In normal pics I cannot tell much difference. I also have the 40 1.2 and that is great too.
I would say the biggest advantage about getting the CV 40 2.8 is the flare resistance and it will not be beat up. Have you ever seen a 40 Cron that does not have a lot of 'patina'? Biggest disadvantage is the handling is much worse than the 40 Cron.
My 40 Cron is pretty clean. A small bit of paint missing from a few dof lines, but otherwise, I've got a nice one.
As you know, the flare is a thing, but just how much "worse" is the handling on the CV? I typically shoot my 40 Cron via zone shooting, and kinda switch between two different "focus settings", with my aperture set to 4.5 (or 6.3, if I want a bit more dof).
Not a lot of changes when I'm working "quick". If I'm working slow ... who cares.
highdesertmesa wrote:
I plan to pair this with the 28 Color Skopar Type I so I have a super small matched 28/40 pair – probably with the 28 in silver so I can tell them apart more easily.
I'm starting to come around to a similar thought ... getting the pair to match with the Mono body.