Our adapter has a set screw. We found that the spring did not lock the adapter sufficiently to go that route. I will have photos sometime this week. The Adapter will have a very snug smooth fit on to the camera with an exact fit to the locking pin. We have seen adapters where the locking pin is very loose thus causing a rotation of the lens on the camera once mounted. This is not our case. The adapters will overlap the entire mount on the Canon. Thus, not exposing any of the steel face Canon uses on their cameras.
Some people import adapters and resell them. We are fully involved with the production of these 100% U.S.A made adapters.
I currently have the following Contax Zeiss lenses: 35-70mm 3.4, a 21mm 2.8 and a 50mm 1.4 which are all MM diaphragm. Either way, you will need to do manual meetering or aperature priority with any adapter currently on the market.
I wish I had seen this post earlier. I just oredered my second cameraquest adapter a few hours ago. I have two contax lenses and I am going to have two more.
I do have the spring loosening problem with cameraquest which is a bit dangerous.
I may be interested in gettin another one. Where are you guys at and how long would it take to receive shipping. I am in California.
mcbroomf wrote:
Is this adapter for AE/MM lenses or C/Y or will you be making both? I'm only using MM but I've seen C/Y adapters for sale.
The mount for the manual-focus Contax (/Yashica) SLR line introduced in the mid 70's is known as the C/Y mount. The diaphram action is designated by the initials AE or MM. All of the original variable aperture lenses (i.e. all lenses except the Mirotars) were AE, which meant the aperture had to be set manually using the ring on the lens. The only auto exposure mode supported by the bodies was AE.
Most (but not all) of the newest lenses support the MM (multi-mode) diaphram, which allows the diaphram to be set by the camera, which in turn enables fully automatic operation in shutter priority and program modes. You can use AE lenses on all Contax bodies, but MM lenses work only with newer bodies.
AFAIK, C/Y - EOS adapters work with both MM and AE lenses.
We are in Portland Oregon. So CA delivery would be easy. The units are being anodized and won’t be completed till the 28th. You know, it’s that holiday thing
Yes. Infinity focus works.
Sorry to hear about the loose spring. I heard the Cameraquest is an import from Japan. Don't really know much more than that. The DSLReXchange adapter is U.S made and I am sure you will be 100% satisfied with them. Not to mention they also look very good with engraving on themand the cost is substatially less than others.
Unlike other brands, you can return the unit within two weeks if you are not satisfied.
If you’re shopping for an adapter, let me point out 2 key differences between the DSLReXchange adapter and the others. Keep this in mind as you make your purchase and regardless of who you buy from you should be aware of these things.
1. The tabs that mount on to the Canon from adapters are in our opinion are too thin and do not match those you see on the canon lenses. In fact, a slight bit of pressure could bend them and cause the lens to come off. We feel this may pose a problem further on in the life of the adapter. When you receive your adapter you will notice this immediately.
2. Our Adapters lock PEREFCTLY with the locking pin on the Camera. The Adapters I have from other manufacturer do not. Hence when focusing, the lens rotates on the body. He may fix this eventually but I received some from him last week and they still have this flaw.
3. If you're not satisfied with your adapter from DSLReXchange, you can return it for a refund within 10 days. Not the case with some others.
The DSLReXchange adapters do not exhibit any of these flaws.
You should do your research well before spending your money.
I never knew thay came loose while focusing. You may have misunderstood an earlier statement. Maybe owners of others can validate this as well. But, I have two adapters where the cut out on the adapter that the camera locking pin fits into is too big. Thus when you focus, the lens rotates slightly until the locking pin on the camera hits the outer edge of the hole on the adapte. This happens in both directions. Hope this helps.
In my experience there is a lens/adapter interaction. With the same adapter (spring, no locking screw) on one lens it is nice and tight, another it rotates slightly as Jorge describes, and on another it's really too lose to use (on that one I use an adapter with a screw). From now on I'll be buying adapters with screw only.
In an effort to move out the first batch of Zeiss to Canon so I can work on the Leica to Canon and Zeiss to Nikon, I am offering the first 20 people who buy 3 adapters at once a fourth one for free. This offer would include free shipping as well.