Fred Miranda wrote:
freaklikeme wrote
Fred Miranda wrote
freaklikeme wrote
Fred Miranda wrote
freaklikeme wrote
Are you setting your WB as a constant? That improved my satisfaction with the CC results. What you do you mean by constant? Sorry, I was on my phone and mistyped custom, which it changed to "constant." Setting WB up via custom setting and the WB card on the passport (assuming you're using the passport) before shooting the card. This should make zero difference when creating a profile. To test this out:
Take 3 images of the color checker target (same lighting). One with custom WB, another with Auto WB and another using Daylight.. Create a profile for each of the DNG files and give them different names. Load a regular raw image (from the modded camera) in Lightroom and compare the profiles. All three profiles should affect the RAW file the same exact way. Should, yes, but the profiles should also eliminate any tint issues. Well done custom profiles should not affect tint or color temperature. That's a WB adjustment which still have to be addressed in camera or in post when dealing with the UT coverglass.
I suggest using the grey on the colorchecker passport or similar. On a sunny day, take a picture the a gray card and register it as daylight setting. Do the same for other lighting conditions mostly used.
You're right, it shouldn't affect WB, nor should it leave you with a skewed tint, but unless you've set your dual luminance profile to opposite ends of the spectrum or you've created individual profiles for specific lighting conditions, getting an accurate white balance when shooting may not leave you with an accurate profile to apply. And shooting your Passport with Sony's auto WB (outside of daylight conditions), in my experience, may lead to inaccurate profiling as well, which is why I recommend setting a custom WB before shooting the Passport. That's my whole point.