genji wrote:
The Australian CV distributor has advised me that the RRP (Recommended Retail Price) for the Apo-Lanthar 50/2 is AUD1395 (approximately USD955/EUR856/GBP740/CAD1254).
That's a very good price. Official price in Japan is 120 000 JPY (before tax) which translates to AUD 1663 according to Google currency conversion and official tax inclusive price is 132 000 JPY which would be AUD 1772.
The actual pre-order price (tax inclusive) in the best specialist camera stores (including Map Camera and Fujiya Camera) is 115200 JPY = 1547 AUD. Before tax it translates to 104728 JPY = 1406 AUD.
I guess Cosina will again price it a bit differently for each market depending on other reference product pricing and expected demand etc.
It seems to be doing well in terms of pre-orders in Japan market so far, #3 in Map Camera's product popularity ranking across all cameras and lenses and rising fast in kakaku.com popularity ranking list. I'm glad I managed to pre-book very early in the 1st hour of pre-order availability so should be able to get it from the first batch.
bjornthun wrote:
Floating element wide angles have been around for 35-40 years now. Nikon uses the term CRC = close range correction for it. Lenses such as Nikon 20/2.8, 24/2.8 that existed both as MF and AF lenses have this feature. The Ai-S 28/2 has CRC as well.
Zeiss is right in feeling that floating element designs are common place now.
I have a great little Olympus OM 28 f/2 with floating element that is over 30 years old IIRC.
Juha Kannisto wrote: genji wroteThe Australian CV distributor has advised me that the RRP (Recommended Retail Price) for the Apo-Lanthar 50/2 is AUD1395 (approximately USD955/EUR856/GBP740/CAD1254).That's a very good price. Official price in Japan is 120 000 JPY (before tax) which translates to AUD 1663 according to Google currency conversion and official tax inclusive price is 132 000 JPY which would be AUD 1772.
The actual pre-order price (tax inclusive) in the best specialist camera stores (including Map Camera and Fujiya Camera) is 115200 JPY = 1547 AUD. Before tax it translates to 104728 JPY = 1406 AUD.
I guess Cosina will again price it a bit differently for each market depending on other reference product pricing and expected demand etc.
It seems to be doing well in terms of pre-orders in Japan market so far, #3 in Map Camera's product popularity ranking across all cameras and lenses and rising fast in kakaku.com popularity ranking list. I'm glad I managed to pre-book very early in the 1st hour of pre-order availability so should be able to get it from the first batch....Show more →
To be honest, Juha, I expected the APO-Lanthar 50/2 to be priced similarly to the Nokton VE 50/1.2, whose list price is AUD1695–close to the average of the official prices you quoted. (The Nokton is however currently on special for AUD1440.75.) The AUD1395 price for the APO is certainly welcome. I have both VE and VM versions of the Nokton 50/1.2 and am looking forward to comparing at least the VE Nokton to the APO-Lanthar.
genji wrote: Juha Kannisto wrotegenji wroteThe Australian CV distributor has advised me that the RRP (Recommended Retail Price) for the Apo-Lanthar 50/2 is AUD1395 (approximately USD955/EUR856/GBP740/CAD1254).That's a very good price. Official price in Japan is 120 000 JPY (before tax) which translates to AUD 1663 according to Google currency conversion and official tax inclusive price is 132 000 JPY which would be AUD 1772.
The actual pre-order price (tax inclusive) in the best specialist camera stores (including Map Camera and Fujiya Camera) is 115200 JPY = 1547 AUD. Before tax it translates to 104728 JPY = 1406 AUD.
I guess Cosina will again price it a bit differently for each market depending on other reference product pricing and expected demand etc.
It seems to be doing well in terms of pre-orders in Japan market so far, #3 in Map Camera's product popularity ranking across all cameras and lenses and rising fast in kakaku.com popularity ranking list. I'm glad I managed to pre-book very early in the 1st hour of pre-order availability so should be able to get it from the first batch.To be honest, Juha, I expected the APO-Lanthar 50/2 to be priced similarly to the Nokton VE 50/1.2, whose list price is AUD1695–close to the average of the official prices you quoted. (The Nokton is however currently on special for AUD1440.75.) The AUD1395 price for the APO is certainly welcome. I have both VE and VM versions of the Nokton 50/1.2 and am looking forward to comparing at least the VE Nokton to the APO-Lanthar.
I was also expecting a higher price before there was any information available. In Japan 50/1.2 Nokton for E-mount has official price of 150 000 JPY before tax in contrast to 120 000 JPY for the APO-Lanthar. Other recent CV E-mount releases have also been on the expensive side in Japan (e.g. 21/1.4 has official pre-tax price of 165 000 JPY). It seems both 50/1.2 and 21/1.4 in E-mount haven't sold as well (in Japan) as many of the earlier releases so maybe the price has been getting too high and from October 1st the consumption tax was raised from 8% to 10%.
I also have the Nokton 50/1.2 (E-mount) version, but no VM. I intend to keep both 50/1.2 and 50/2 but might sell e.g. my 55/1.8 and 50/1.8 later on. I will also keep my Sony Zeiss 50/1.4.
thrice wrote:
Searched the thread to no avail, any idea if there will be a VM version of this lens?
The original German press release that first announced this lens is stating that the lens was developed exclusively for Sony E-mount so based on that there seems to be no VM version planned at least in the near future.
Also, Cosina hasn't done any FLE lens designs for VM so far.
Pixel Perfect wrote: bjornthun wroteFloating element wide angles have been around for 35-40 years now. Nikon uses the term CRC = close range correction for it. Lenses such as Nikon 20/2.8, 24/2.8 that existed both as MF and AF lenses have this feature. The Ai-S 28/2 has CRC as well.
Zeiss is right in feeling that floating element designs are common place now.I have a great little Olympus OM 28 f/2 with floating element that is over 30 years old IIRC.
I have one too. More likely it’s over 40 years old since the OM-1 was released in 1972 and the 28/2 can’t have been too long following. The OM 85/2 is also a floating element design.
genji wrote: Pixel Perfect wrotebjornthun wroteFloating element wide angles have been around for 35-40 years now. Nikon uses the term CRC = close range correction for it. Lenses such as Nikon 20/2.8, 24/2.8 that existed both as MF and AF lenses have this feature. The Ai-S 28/2 has CRC as well.
Zeiss is right in feeling that floating element designs are common place now.I have a great little Olympus OM 28 f/2 with floating element that is over 30 years old IIRC.I have one too. More likely it’s over 40 years old since the OM-1 was released in 1972 and the 28/2 can’t have been too long following. The OM 85/2 is also a floating element design.
So, I think, were the 21 and 24 f2 lenses.
That Zuiko 2/28 produces some very funky wide open bokeh, like the Classic 2/28 on steroids. I quite like it occasionally. And then it calms down tremendously a stop or so down.
I would say from the samples the bokeh looks promising. I will be quite interested to see this lens put through its paces from hopefully Fred and someone at philipreeve.net.
I know I can't do lens reviews anywhere near as well as those folks but I do have the CV 50 f/1.2 and the Nikon 50 f/1.8S and I will do my best to do some comparisons.
Thank you for the link! It looks quite good and I am tending to let go the Loxia 50mm for this CV lens! I hope someone will do a side by side photo comparison between the Loxia 50mm and CV 50mm APO.
First lens I’ve ever pre-ordered. I don’t usually pre-order lenses, but already having the CV65 and CV110, but in a light weight package at a reasonable price. It’s a no brainer for me.
The only thing I’m not looking forward to is parting ways with the CV65, with this lens replacing it. Easily my favourite mid range lens.
DavidBM wrote: Steve Spencer wroteFred Miranda wroteSteve Spencer wroteFred Miranda wrotesmpetty wroteI've owned both the Loxia 21 and (currently) the CV 21/1.4. IMO, they are equal in IQ, both excellent. The biggest differentiators are size (win: Loxia) and speed (win: Voigtlander). Some prefer the Loxia sunstars. I kept the CV 21 for the abilty to do astro (which I never do ). No wrong choice between the two.They also differ in field curvature shape. The Voigtlander's is wavy and the Loxia is inwards.Two other important differences for me after owning both:
1) I like the CV 21 f/1.4 better for up close performance. I think the floating element in the CV really helps provide very high level performance up close.
2) I much prefer the ergonomics of the CV especially the aperture ring at the front of the lens instead of back close to the mount on the Loxia. I also find the CV 21 f/1.4 a lot easier to get on and off the camera.Are you sure the Loxia 21/2.8 does not feature a floating system?
One Zeiss page, it shows the FLE icon:Good question Fred. I have never seen that page before, so I thought that because Zeiss never said anything about a floating element design that the 21 didn't have a floating element. In shooting I always felt the one thing my Zeiss ZE 21 f/2.8 did better than the Loxia 21 f/2.8 was shooting up close and in my mind I attributed that to the ZE 21 having a floating element when the Loxia did not, but maybe I was wrong. That page with the icon at the bottom certainly suggests a floating element was used. Funny that Zeiss never said much about that. It is also strange that for all the Milvus and Otus lenses, which all have floating elements, and for the ZM lenses with floating elements (the 15 f/2.8 and the 35 f/1.4) Zeiss lists "floating elements design," in writing under the data tab on the lens description page where they describe special glass and other features of the lens, but they don't do so the Loxia 21 and 25. I can't find a legend for the icon at the at the bottom of the lens description page either.I enquired with Zeiss about this a year or so ago, and they confirmed FLE in the 21 and 25.
Fred Miranda wrote: DavidBM wroteSteve Spencer wroteFred Miranda wroteSteve Spencer wroteFred Miranda wroteThey also differ in field curvature shape. The Voigtlander's is wavy and the Loxia is inwards.Two other important differences for me after owning both:
1) I like the CV 21 f/1.4 better for up close performance. I think the floating element in the CV really helps provide very high level performance up close.
2) I much prefer the ergonomics of the CV especially the aperture ring at the front of the lens instead of back close to the mount on the Loxia. I also find the CV 21 f/1.4 a lot easier to get on and off the camera.Are you sure the Loxia 21/2.8 does not feature a floating system?
One Zeiss page, it shows the FLE icon:Good question Fred. I have never seen that page before, so I thought that because Zeiss never said anything about a floating element design that the 21 didn't have a floating element. In shooting I always felt the one thing my Zeiss ZE 21 f/2.8 did better than the Loxia 21 f/2.8 was shooting up close and in my mind I attributed that to the ZE 21 having a floating element when the Loxia did not, but maybe I was wrong. That page with the icon at the bottom certainly suggests a floating element was used. Funny that Zeiss never said much about that. It is also strange that for all the Milvus and Otus lenses, which all have floating elements, and for the ZM lenses with floating elements (the 15 f/2.8 and the 35 f/1.4) Zeiss lists "floating elements design," in writing under the data tab on the lens description page where they describe special glass and other features of the lens, but they don't do so the Loxia 21 and 25. I can't find a legend for the icon at the at the bottom of the lens description page either.I enquired with Zeiss about this a year or so ago, and they confirmed FLE in the 21 and 25.We should let Phillip know about that so he can update his review: https://phillipreeve.net/blog/rolling-review-zeiss-loxia-distagon-2-821mm-t/
I always thought the Loxia 21/2.8 had great resolution at close distance.
I've edited the review (by Jannik with an update by Bastian) with an update. Maybe Jannik will just rewrite that section sometime...
thrice wrote:
Searched the thread to no avail, any idea if there will be a VM version of this lens?
I asked about an M version a few pages back. Unfortunately, the rangefinder coupling would mean a pretty big design hurdle, so doesn't look promising. I think it'd be a HUGE hit, though. 49mm filter threads, too. Dang.
For all my swearing off of ever getting another 50mm, this one does look intriguing. And (if I'm allowed to say this without jinxing anything) the announced price was much lower than I was expecting. Looking forward to seeing some tests that run the full gamut of user experience and rendering, not just focusing on resolution. Looking at you, Fred and Philip