fredmiranda.com Login
This topic is in the 2017 archive. You can read it and like its posts here. It is read only.

Archive 2017L-Bracket for D850

  
 
MarekGlaser
Offline
Details
p.7 #1L-Bracket for D850
Blakehfreeman wrote:
Do you have to tighten the lug into the strap hole?.. I'm worried about wear.

I'd check myself (my L plate came today) but I don't have my camera yet! 😡😡😡



The strap hole isn't threaded so you're just sliding the lug right through that. You screw the lug into the L-Plate and tighten until it's firmly in place. There's no wear to worry about.
Sep 27, 2017 at 09:17 PM
Blakehfreeman
Offline
Details
p.7 #2L-Bracket for D850
Officially exchanging mine for the light weight L bracket- they were nice about the exchange. The "functionality" I'm losing are actually the things that bugged me about the plate I received yesterday.
Sep 28, 2017 at 09:21 AM
Blakehfreeman
Offline
Details
p.7 #3L-Bracket for D850
Exchanged mine! Thanks for the heads up!

Andre Y wrote:
It looks like RRS really listens to their customers: they now have an entry for a 1-piece, lightweight D850 L-plate!

http://www.reallyrightstuff.com/Ultralight-L-Plate-for-NIKON-D850

This will probably be the one I end up getting. The main disadvantage besides the higher initial cost is that you can't slide the L part out for easier access to the side ports. They can't slide the baseplate with a slot like past designs either since there are keys that insert into the bottom of the camera, but if I need that (for video), I'll just use their cable spacer.

Sep 28, 2017 at 09:26 AM
lukemeup
Offline
Details
p.7 #4L-Bracket for D850
Just had an email exchange with RRS - it could be a month or more before they have the lightweight one-piece l-bracket ready ("it's a new idea"). I'll patiently wait for that one.
Sep 28, 2017 at 10:10 AM
Blakehfreeman
Offline
Details
p.7 #5L-Bracket for D850
I was told 3-4 weeks (over the phone)... which is almost exactly the amount of time it took my standard RRS L plate for my D850 to arrive. This new(er) plate looks more like what my D800E plate was like (aka just what I was looking for).

tek9 wrote:
Just had an email exchange with RRS - it could be a month or more before they have the lightweight one-piece l-bracket ready ("it's a new idea"). I'll patiently wait for that one.

Sep 28, 2017 at 10:18 AM
Hardcore
Offline
Details
p.7 #6L-Bracket for D850
I just switched my order to the lighweight L plate. They said 6-8 weeks delivery. Thanks Andre.
Sep 28, 2017 at 02:36 PM
Blakehfreeman
Offline
Details
p.7 #7L-Bracket for D850
Just received this comparison from RRS! Can't believe the weight difference! Hope this is helpful to some!




Sep 29, 2017 at 08:56 AM
Ross Martin
★ Featured Winner
Offline
Details
p.7 #8L-Bracket for D850
Thank you for posting that @Blakehfreeman. The lighter smaller one-piece design is what I've been used to using with l-plates from RRS and Kirk for various DSLRs the past decade and I'm staying with that type, but some folks will prefer having the extra features of the heavier 2-piece set. Not often do manufacturers give us a choice like this - kudos to RRS for offering both and letting the end user decide what suits them best.
Sep 29, 2017 at 10:46 AM
Blakehfreeman
Offline
Details
p.7 #9L-Bracket for D850
Happy to help! PS, their email makes it sound like they got a fair amount of blowback from the initial design:

"If you have already ordered the modular D850-L Set (BD850-L Set ) and you would like to switch to the ultralight version (BD850-UL), please email us at [email protected].

If you have purchased the BD850-L Set but have not received a shipping notification, simply email us and we will switch your order to a BD850-UL. You will only be charged for the D850-UL ($140).

If you have already received your BD850-L Set or a shipping notification and you would like to exchange it for a BD850-UL, send the BD850-L Set back to us with a note that you would like the BD850-UL. We will reimburse the difference to your account ($40, the item must be in like-new condition)."


SeattleDucks wrote:
Thank you for posting that @Blakehfreeman. The lighter smaller one-piece design is what I've been used to using with l-plates from RRS and Kirk for various DSLRs the past decade and I'm staying with that type, but some folks will prefer having the extra features of the heavier 2-piece set. Not often do manufacturers give us a choice like this - kudos to RRS for offering both and letting the end user decide what suits them best.
Sep 29, 2017 at 11:06 AM
sjms
Offline
Details
p.7 #10L-Bracket for D850
they're being undercut by Kirk to begin with as kirk is keeping it down to the lowest common denominator simple. they are giving us all a choice. mine is on and most likely not coming off for awhile.
Sep 29, 2017 at 02:25 PM
rick2906
Offline
Details
Sep 29, 2017 at 02:44 PM
kaplah
Offline
Details
p.7 #12L-Bracket for D850
Glad to see they are maintaining the QD attachment point for slings, well in this case straps.
Sep 29, 2017 at 02:47 PM
sjms
Offline
Details
p.7 #13L-Bracket for D850
just got done meandering around the Great Swamp here in NJ for a few hours getting to know the D850/RRS L on my Magpul.
Sep 29, 2017 at 02:51 PM
josh paris
Offline
Details
p.7 #14L-Bracket for D850
sjms wrote:
Danner wroteI wish they'd build a camera with an ARCA rail molded into the bottom.
sigma offered that option on one of their feet.

I prefer a non integrated option so that I can choose my variables.



Good point, but that is to say they wouldn't be mutually exclusive from each other however. I myself would love an integrated shelf....as it would be as solid as possible, lighter, thinner and without additional expense (well assuming of course there wasn't an upcharge
Sep 29, 2017 at 03:02 PM
sjms
Offline
Details
p.7 #15L-Bracket for D850
well, it could be thinner then the double stack (camera base and then plate) but it would be a higher price to produce due to the difference in materials and manufacturing used. but then again to maintain the rather curvy base shapes today it would somewhat of a design issue. then there would be how to enjoin a grip and such. its gets into the "variables" territory again. yes there is always an answer but to what degree of compromise?
Sep 29, 2017 at 03:09 PM
Ross Martin
★ Featured Winner
Offline
Details
p.7 #16L-Bracket for D850
sjms wrote:
before i'd go to the RRS lightweight i'd see what the kirk finished product looks like


That's good advice. Pics are up of the Kirk finished product at their website and at B&H. It has the slot to allow variable distance from camera ports, just as RRS had a slot on their D810 plate but removed it from their newly announced D850 2nd version. Just ordered the Kirk and will compare to the RRS when both orders are in hand.
Sep 29, 2017 at 09:22 PM
Lee Saxon
Offline
Details
p.7 #17L-Bracket for D850
Odd design decision to give a fixed 1/4-20 instead of a slot on the BD850-UL. I get that using the locating holes in the bottom of the camera was easier that designing a boss that mated with the front of the body like their previous designs, but...it's obnoxious. The "Cable Release Spacer" is a pain and a half.

I'm still over here looking at the BD500-L which is also modular but only $150 wondering what they did wrong with the original BD850-L to make it so expensive to manufacture.
Sep 29, 2017 at 11:48 PM
kaplah
Offline
Details
p.7 #18L-Bracket for D850
Lee Saxon wrote:
I'm still over here looking at the BD500-L which is also modular but only $150 wondering what they did wrong with the original BD850-L to make it so expensive to manufacture.

I have the BD500-L, and prefer it to a slotted plate. Can' speak to why the BD850-L costs so much more, although the additional machining to attach it to the strap boss - and to create the alternate strap attachment point - would be part of that.
Sep 30, 2017 at 06:50 AM
Lee Saxon
Offline
Details
p.7 #19L-Bracket for D850
kaplah wrote:
I have the BD500-L, and prefer it to a slotted plate.


I definitely agree that the modular approach is better than the slot. Much less of a pain to adjust. Using the locating holes instead of reverse engineering a front boss is probably more reliable too (they blew the front boss on the BD750-L and it works its way loose over time [months, but still]). I'm in favor of them going that way for the BD850-L.

My point was just that a plate with neither modularity nor the slot is too inflexible, at least for me. I need the ports seldom enough that I would've gone with a slotted plate to save $40, but I need them often enough that I'm not going to futz with the Cable Relief Spacer (which also more than negates the cost savings).
Sep 30, 2017 at 07:17 AM
sjms
Offline
Details
p.7 #20L-Bracket for D850
cable relief spacer vs 2 sided Velcro strips. Velcro wins for my needs.
Sep 30, 2017 at 07:46 AM
FM ForumsNikon ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister