fredmiranda.com Login
This topic is in the 2017 archive. You can read it and like its posts here. It is read only.

Archive 2017L-Bracket for D850

  
 
sjms
Offline
Details
p.6 #1L-Bracket for D850
As you say it goes both ways. The "fanboy" and its antithesis the "critic"

We are all flawed as are our perspectives.

And there's no free pass, you simple don't buy their product. There is always an option choosing some other designers different perspective and with different compromise. ones that your willing to accept

remember with all that bluster you were looking at a stated incomplete design otherwise known as a work in progress.

Choose your poison and then you're a fan of it.
Sep 22, 2017 at 09:36 PM
webmstrk9
Offline
Details
p.6 #2L-Bracket for D850
For what it's worth, I took the plate off my Df and onto the D850 and it fits with no issues. It isn't an L-Plate, but a cheaper and available option.

http://www.reallyrightstuff.com/BP-CS-Multi-camera-conventional-plate
Sep 25, 2017 at 06:31 PM
ATX353
Offline
Details
p.6 #3L-Bracket for D850
Mine shipped and will be here on Friday so I will get some pictures posted on camera!
Sep 25, 2017 at 06:35 PM
Lee Saxon
Offline
Details
p.6 #4L-Bracket for D850
I've been defending RRS in these threads but I think they may have pushed out of my price range this time. For the D810 the regular L-plate was $140 and the taller battery grip plate $190. For D850 those numbers are $180 and $195. Particularly odd that only the former really changed.

May go with Kirk this time around, they're still @ $145. Haven't had a Kirk plate since my D1x.

Blakehfreeman wrote:
I have owned many L brackets from RRS... this one seems needlessly over engineered (I've never once said gee I wish an allen wrench was stored in my l bracket)


They're doing that on a number of plates now, I think that's the wave of the future. Heck, Kirk also puts them in their clamps!

From my own research into a plate I'm making, the little magnets holding them in place are around $3 each. Probably less for RRS since they'd be buying far larger volume than I. I doubt that's the reason the D850 plate jumped in price so much.
Sep 25, 2017 at 07:24 PM
ATX353
Offline
Details
p.6 #5L-Bracket for D850
This may seem like an odd question, forgive my ignorance on the matter, but can the magnet used to hold the hex wrench interfere with the camera at all?

Sep 25, 2017 at 08:41 PM
Lee Saxon
Offline
Details
p.6 #6L-Bracket for D850
They're extremely small (~1/8") and quite weak so I am optimistic that the answer is "no," but I cannot say with certainty.
Sep 25, 2017 at 08:47 PM
ATX353
Offline
Details
p.6 #7L-Bracket for D850
Interesting indeed. I've always been under the impression that magnets and electronics shouldn't mix.
Sep 25, 2017 at 08:50 PM
dasams
Offline
Details
p.6 #8L-Bracket for D850
Lee Saxon wrote:
I've been defending RRS in these threads but I think they may have pushed out of my price range this time. For the D810 the regular L-plate was $140 and the taller battery grip plate $190. For D850 those numbers are $180 and $195. Particularly odd that only the former really changed.


Is the D810 grip plate one or two pieces? The D850 L-plate is two pieces and that no doubt upped their mfg cost.
Sep 26, 2017 at 11:41 AM
sjms
Offline
Details
p.6 #9L-Bracket for D850
for the 810 it is a single piece

i was just informed that my RRS L non grip for 850 has been shipped so i will see it shortly
Sep 26, 2017 at 11:53 AM
Blakehfreeman
Offline
Details
p.6 #10L-Bracket for D850
+1

sjms wrote:
for the 810 it is a single piece

i was just informed that my RRS L non grip for 850 has been shipped so i will see it shortly

Sep 26, 2017 at 04:00 PM
lukemeup
Offline
Details
p.6 #11L-Bracket for D850
I think I'll just go with Kirk or wait for Markins for single piece l-plate.
Sep 26, 2017 at 11:31 PM
sjms
Offline
Details
p.6 #12L-Bracket for D850
Lee Saxon wrote:
They're extremely small (~1/8") and quite weak so I am optimistic that the answer is "no," but I cannot say with certainty.


The D500 L plate has the magnet and Allen wrench. You don't even notice it. I remember when the first L plates came out the first complaint was "now I have to carry a tool with me". Remember there are companies that do their due diligence before a product is released to not compromise safety. Then there are those that fall a little short. Those little magnets have no potential to do damage. Otherwise they wouldn't be there. I forget sometimes I have the wrench on my camera as it is. I do believe there are those that will never be satisfied. Then of course there is FUD.
Sep 27, 2017 at 02:25 AM
Andre Y
Offline
Details
p.6 #13L-Bracket for D850
It looks like RRS really listens to their customers: they now have an entry for a 1-piece, lightweight D850 L-plate!

http://www.reallyrightstuff.com/Ultralight-L-Plate-for-NIKON-D850

This will probably be the one I end up getting. The main disadvantage besides the higher initial cost is that you can't slide the L part out for easier access to the side ports. They can't slide the baseplate with a slot like past designs either since there are keys that insert into the bottom of the camera, but if I need that (for video), I'll just use their cable spacer.
Sep 27, 2017 at 06:23 PM
ATX353
Offline
Details
p.6 #14L-Bracket for D850
Thank you I just pre-ordered it. My L Pl. will be here on Friday so I will post some pictures of the two pieces as well.
Sep 27, 2017 at 06:32 PM
lukemeup
Offline
Details
p.6 #15L-Bracket for D850
Andre Y wrote:
It looks like RRS really listens to their customers: they now have an entry for a 1-piece, lightweight D850 L-plate!


Thank you. I just put my pre-order in.
Sep 27, 2017 at 07:26 PM
Ross Martin
★ Featured Winner
Offline
Details
p.6 #16L-Bracket for D850
I just preordered the new lighter weight 1-piece version.
Sep 27, 2017 at 07:47 PM
Blakehfreeman
Offline
Details
p.6 #17L-Bracket for D850
Irritated as my 2 piece L plate came in the mail today... will call them to discuss whether to exchange my plate for this one.
Sep 27, 2017 at 07:58 PM
MarekGlaser
Offline
Details
p.6 #18L-Bracket for D850
Here's what it looks like on the camera.

There are 2 hex wrenches that tuck away inside the L-Plate so you always have the necessary tools on hand to make adjustments - second smaller wrench shown below.

With the resolution of the camera the extra rigidity of the additional attachment point is not a bad idea.
















Sep 27, 2017 at 08:01 PM
Blakehfreeman
Offline
Details
p.6 #19L-Bracket for D850
Do you have to tighten the lug into the strap hole?.. I'm worried about wear.

I'd check myself (my L plate came today) but I don't have my camera yet! 😡😡😡

MarekGlaser wrote:
Here's what it looks like on the camera.

There are 2 hex wrenches that tuck away inside the L-Plate so you always have the necessary tools on hand to make adjustments - second smaller wrench shown below.

With the resolution of the camera the extra rigidity of the additional attachment point is not a bad idea.


Sep 27, 2017 at 08:11 PM
sjms
Offline
Details
p.6 #20L-Bracket for D850
before i'd go to the RRS lightweight i'd see what the kirk finished product looks like
Sep 27, 2017 at 08:28 PM
FM ForumsNikon ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister