I've had the lens for a year now and after this weekend, when I took it out of the car, it sounded like a pile of loose parts inside. Scary. Turns out I had it in the case for 800 miles of crappy highway in a stiffly sprung car with VR ON - and the whole assembly in there got bounced around. Put back on camera and tested it, and it all works, but AF seems noisier now (or I am paranoid that something got broken). It all works as it usually did, and once I connect a camera and power it up the rattle noise in the lens goes away.
So what is the official word on VR setting for transporting the lens? Do you have to turn VR Off or should it "park itself?" I googled a bit but could not come up with a proper answer.
How much $$$ to have a lens like this checked out/tuned up? I need a new rear mount anyway, since anything I mount on this lens wiggles a little. Clearly not the way that should be working.
Since the Rolex 24h race is on right now, here's a car from last year, which now is a historic race car, as this class has been eliminated. Prototype Challenge used to be a "low cost" way to go racing in IMSA competition. At the wheel here James French who with co-driver Pato O'Ward won the last PC class championship. This is in Detroit on Belle Isle
I dipped my budget-limited toes in the big gun pond a short while back, when I picked up a 400 AF-S from the boards. It's a little on the battered side but it seems to work well enough.
I hadn't had much of a chance to try it out, until I went up for the Ft Lauderdale airshow a couple of week back. Unfortunately the skies opened shortly after I arrived and the remainder of the day was called off, but I did get to see a few flybys by a Mustang and a Corsair. Gorgeous aircraft! They sure don't make 'em like that any more.
This was my first airshow, and also my first outing with the 400, so please be gentle
Next props you shoot, go into Shutter Priority mode, 1/60th or so. That will avoid the "stopped prop" look. Otherwise, they look good!
Chris Court wrote:
I dipped my budget-limited toes in the big gun pond a short while back, when I picked up a 400 AF-S from the boards. It's a little on the battered side but it seems to work well enough.
I hadn't had much of a chance to try it out, until I went up for the Ft Lauderdale airshow a couple of week back. Unfortunately the skies opened shortly after I arrived and the remainder of the day was called off, but I did get to see a few flybys by a Mustang and a Corsair. Gorgeous aircraft! They sure don't make 'em like that any more.
This was my first airshow, and also my first outing with the 400, so please be gentle
NightOwl Cat wrote:
Next props you shoot, go into Shutter Priority mode, 1/60th or so. That will avoid the "stopped prop" look. Otherwise, they look good!
C
1/60th with a 400mm without VR? Might be a challenge.
pburke wrote:
The streaky reflection off the engine cowling on the Corsair looks like a dirty filter or front element - never seen anything like that from my 400mm.
Yeah, that's a little strange. Not sure what caused that – lens elements and filter are clean. Funny how there's so much more reflection from the blue Corsair than the silver Mustang.
Great shots as always Lance. Just got my 400mm f2.8E last night, but can’t use it for another 2 weeks as I have just left on a 2 week vacation to Canada. Test shots indoors were super sharp even before AF Tune, can’t wait to start using the lens upon return. I have TC1.4III and TC1.7II. Would you recommend I get TC2 III as well. I have a D500 body as well, which I intend to use instead of TC2.0 III, would be great to hear your views. Thanks !
sandy27000 wrote:
Great shots as always Lance. Just got my 400mm f2.8E last night, but can’t use it for another 2 weeks as I have just left on a 2 week vacation to Canada. Test shots indoors were super sharp even before AF Tune, can’t wait to start using the lens upon return. I have TC1.4III and TC1.7II. Would you recommend I get TC2 III as well. I have a D500 body as well, which I intend to use instead of TC2.0 III, would be great to hear your views. Thanks !
Thank you very much, Sandy27000.
Congrats on the new lens, it is one of Nikon's finest lenses.
As for whether you should use the 2x TCIII or D500, I would probably use the D500 over the 2x TCIII but if you really need longer than that again, then the 2x TCIII can work well. However, you really need to have very good long lens craft in order to get the best out of it.
My 400 doesn't need any AF adjustment, so yours may not either.
FYI, many North American cities and suburbs are home to thriving communities of feral parrots, so you don't have to leave the continent to photograph wild parrots.
Christian H wrote:
FYI, many North American cities and suburbs are home to thriving communities of feral parrots, so you don't have to leave the continent to photograph wild parrots.
Ground Parrot, very rare and in fact endangered. I have only ever seen then 4 times and twice I was unable to get a photo of them as they are so secretive. This was a lucky shot as he popped his head up to look.
Rose Cockatoo or Galah also found in many parks across Sydney, usually in a mating pair but also in flocks.
Gang Gang Cockatoo male, sometimes seen in Sydney, but more likely seen in the countryside. Usually in a mating pair.
D7000 + 500 f4G VR, 1/500s f/4.5 at 500.0mm iso800
Gang Gang Cockatoo female of the mating pair with the male above.
D7000 + 500 f4G VR, 1/500s f/4.5 at 500.0mm iso560
These are just some that I see most every day except for the Ground Parrot. However, just drive out of the main cities to the countryside and desert areas and there are many more to be seen. Some, like Budgerigars, Major Mitchell Cockatoos, Galahs etc can be seen in large flocks.