trenchmonkey wrote:
Why f11? don't you consider MTF's for best IQ?? Plenty of DOF at f8
and you'd drop your ISO's significantly.
I checked the exif of the nef file. It was on shutter priority. It was bright light to dark shades in the location. So I selected shutter priority since I didn't want to miss out on the action due to possible selection of slower speed in Aperture priority mode. Kept the iso at 800 to get maximum leverage.
Birds would come suddenly from some direction, so I wanted to keep my mind on composing and panning at that instant. Whenever possible, I try to hover at f8 and below.
Fair enough. Try shooting Manual...set SS/f stop use Auto ISO
it'll float as needed. Your shot would have then been at ISO400.
This will free you up to concentrate on comps 'n captures.
fightingmouse wrote:
Just wanted to ask. I just picked up the 150-600C for my Nikon D7200. I was wondering, what are people here using for their ISO sensitivity Settings?
I have :
Iso : 100
Hi ISO Command dial Access On
Auto ISO Sensitivity Control On
Maxium Sensitivity : 1000
Minimum shutter Speed : 1000
Depends on situation. select lowest iso possible. for BIF of water birds, I use 1/1600 and above , iso not more than 800. In 7200, I think you can go to 1600 iso or some more before noise sets in. Your above settings appears okay for me. I would use it for good direct sunlight shots. For shades and evening shots, I would select 1600 or more for max sensitivity, iso at 400. Maybe someone with the 7200 can give the right numbers !
Dont laugh but I was shooting in shutter mode thinking I know my shutter and after shooting against my buddy who has a 70d 100 vs 400 ii, vs my d7200 150-600 sigma c. I realize I should try the Aperture mode.
fightingmouse wrote:
Thanks! I will try those options.
Dont laugh but I was shooting in shutter mode thinking I know my shutter and after shooting against my buddy who has a 70d 100 vs 400 ii, vs my d7200 150-600 sigma c. I realize I should try the Aperture mode.
The 7200+Sigma shot appears to be motion blur because the smudging is noticeable throughout the frame evenly. Selecting the continuous shot mode , RAW, 9 central point for focus, speed fixed to 2000, iso 1000, panning along the travel, monopod if possible, switching off VR in the lens and lens program optimized for response+accuracy would have probably captured a few sharp shots. You can practice on any similarly moving objects in the neighborhood (planes, cycles, bikes, cars,) to familiarize. If aperture is going beyond f8 ( to f13 or more), go for a lower iso because beyond f8 or f9 , its not of any use normally.
As many veterans have said, give maximum attention to composition. If the viewer is concentrating on sharpness when a picture is shown, the composition is most likely to be mediocre or non-existent . It is a fact that sharpness of the C is slightly behind S and Nikon 200-500 under lab conditions but should not be a concern for most situations. With the 7200+C, you have more than enough to take great shots !
Check if you have the latest lens firmware at the sigma site. If not, get the dock and update !
Did you ever tinker with the sigma dock by any chance? Lens calibration to custom settings? I think I may also do some focus test on mines and to make sure things arent back of front focusing crazy as I saw some on youtube.
currently I have the
Fast AF priority on custom 1
Standard AF on Custom 2.
I heard if you keep the af slow , it will be more accurate.
I will test out smooth AF later on and see the difference.
Couple of things struck me as bizarre...
10'
4 hrs to tune
Been shootin' mine for a year. It only saw the dock for a
firmware update. No tune, nada. Here's a handheld crop
from this morning. 100 yds out SOOC...just sayin'
Did you ever tinker with the sigma dock by any chance? Lens calibration to custom settings? I think I may also do some focus test on mines and to make sure things arent back of front focusing crazy as I saw some on youtube.
currently I have the
Fast AF priority on custom 1
Standard AF on Custom 2.
I heard if you keep the af slow , it will be more accurate.
I will test out smooth AF later on and see the difference.
I have a post in page 20 - post number 13 some details on focus tuning. I have not entered any custom calibration into the lens through the dock. When I get some time, I plan to first evaluate and understand what is the status of the lens as it is. It has to be done very carefully taking into consideration vibrations, distance to target, target stability etc. Otherwise, it will be a waste of energy and frustrating with the end result of making focus worse.
thanks! I will check those out! I will do an in depth test on the telephoto test in the near future and post it up.
I took some of your advice in terms of iso setting and it seems to work well~!
I notice that some of my shots that I missed were due to my technique ( holding the camera steady) and anticipation ( bird approaching ). Also, I left exposure on too high by mistake at times when clouds started to change. I will have to get some more practice on it. Im just glad I was able to notice my mistakes.
I was shooting with AF-C D9, and I saw that my center point stayed put and never moved in the frame. ( is that normal ? ) I thought it was bound to move around and track a moving subject but it stays dead center.
I switch to AF-A 3D and it was moving everywhere. It actually worked great when I was shooting at some swifts and swallows flying in the sky. I guess it tracks the color/contrast. It worked a bit awful when panning with trees in the background. I switched back to AF-C D9 mode.
The pictures are good. The focus point will not move in the 9 point mode but the camera will use information from all the 9 points for focusing with the central point used as the anchor. You can change that anchor point and the camera will use the surrounding 8 points from the new anchor you select. In 7200, you have 15 cross point sensors out of the 51. So try to use those 15 points only when shooting BIF though you may need all 51 points in some cases. The more points you use, possibilities for error also increases. So use only what is required. Manytimes, I use just one only. Google some articles on usage of focus modes for various situations. That will help in arriving at proper selections. Understanding this is important for action shots. For the time being, set aside the focus calibration and utilize the time to get a full grip on camera and lens settings ! For BIF, I presume you are using multiple shots mode. 7200 has good buffer capacity. Use the fastest type of memory card. I press the shutter to get small bursts of 3 frames instead of keeping the shutter pressed for 4 or 5 seconds to take several shots.
I think tuning the lens helps in getting the focus spot on at the plane of focus one intents it to be. The difference is going to be only a few millimeters front or back from the intended plane for lenses slightly out of tune and this will not affect most compositions. In cases where the frame fills the head of birds, when we focus the eyes, the actual focus could be behind or ahead thereby blurring the eyes.(for an under-optimized lens).