So Today i picked up the sigma 1401 tc. i was looking to make up the difference going from a d7200 to a ff D4.
Everything i read said it wont work with my nikon lens. so to my great surprise and i dont know if this has been brought up before but it works fantastic with my D4 and nikon 300mm PF E. It doesn't report anything in lightroom as if it was attached.
Viewfinder reads f4 and not f5.6. not loosing a stop is unbelievable. Am i wrong im my thinking??
pictures look like there is no tc attached. when i was at the store today they didn't even know they had this tc instock. they passed it around, they were really impressed with the build.
Both guys confirmed it will not work with nikon. oh well at least mine does lol.
The calibration of the lens and camera at factory appears to be excellent as the difference between images with and without focus compensation appears to be negligible or marginal. Focus adjust is made in camera and not lens.
unni wrote:
The calibration of the lens and camera at factory appears to be excellent as the difference between images with and without focus compensation appears to be negligible or marginal. Focus adjust is made in camera and not lens.
My Sigma C seems to be perfect out of the box on my 6D; I honestly expected to have to do some adjusting, but I don't yet see the need to even procure the Sigma dock. Sigma has been doing much better with their AF lately!
Well, you're lucky that you got a "good copy". Mine needed some good calibrations. From 150-350, it looked to be o.k., but from 400-600 it was just soft with my D800. The camera's micro AF fine tune wasn't good enough. I purchased both a Sigma Dock and a lens calibration tool and I spent a good deal of time to calibrate the lens. Since there are 16 focal lengths to calibrate and I also had to do field tests it took me several days to finish it. It may not be 100% accurately calibrated, but the difference between before and after the calibration is big. It's worth spending for the DOC and for the calibration. Some owners of this lens seem to send it back for another copy but like a Sigma technician told me that there's no guaranteed that exchanging the lenses would solve the problem.
To check , I mounted on a tripod and used mirror-up mode after focusing on the target ( use cable release). 1st shot in LV mode. Remaining shots (one each) at AF fine tune settings -10, -5, 0, +5, +10. Lens was at 600mm and f6.3. Then compared the shots in fastone image viewer (it can load multiple images in same window for side-by-side comparison, which I have not seen in any other software). This will clearly show the current status of the lens+camera combination and the direction of the error. Assessment can be made based on the sharpness difference between images. The camera should be stable without the slightest vibration. I have not repeated with the remaining focal lengths. Based on the result, it can be decided whether correction has to be made with the dock or the camera or both. Taking atleast two shots per setting is suggested by many though I did not do it. Writing down in a note book after each shot will be required to avoid confusion. EXIF viewer that shows makers notes can be used to see settings like focus mode, compensation and all other information - in case of doubts. What I did was one of the simplest method and that took two to three hours including downloading, image checking, etc. To do a full process with the dock is the right way but it will take a good amount of time. Ensure that you de-focus the image by turning the focus ring before each shot sothat the AF loop operates on each shot.