D3 + Nikkor 16-35mm f/4 VR @ 35mm, ISO 800, f/5.6, 5 shots with exposures from 1/2s to 1/30s (-2 to + 2 EV), HDR.
Although this is a versatile and reasonable to good lens, after comparing with my beloved MF wides I decided to sell it:
believe it or not, my copy is not better and sometimes is worse (probably misaligned) than the 20/2.8 ais; 24/2 ais, 28/2 ais and the oldies 16/3.5 F ai'd & 35/2 F ai'd OC.
A quick one from the 70-200/4 - was out trying to catch a certain plane on take-off, but I was 2 minutes too late. This Lear, however, took off a few minutes later . . .
Nearly a 100% crop. The 70-200/4 continues to impress me.
Well, John, you out to post up that Lear on the MA2A thread. Nice work!!
If I may, I'd like you all's help in figuring out what the hell is going on in this picture. If you look carefully, especially at almost exactly mid-way on the tree trunk to camera right, there is a very strange distortion-like aberration that appears to run the entire width of the picture. It does not happen on all pictures. I'm using Portra 400, F6 and 35-70 AF-D, developed C-41 by local Walgreens, I have no idea what the EXIF is. Oh, filter on the lens is a BW UV/haze.
hair and dust I put on there. I've used this lab before and they'v done a really good job for 5$ a roll of 36 . I've got several more rolls to check to see if that anomaly shows up on those. I'll put on another lens and run off a roll to see if it happens with that lens. I doubt that will be the case because I've got several shots w/ my 85/1.4 Ai-S on the F6 and the aberration is nowhere to be seen. That roll however was developed by a pro lab . Thanks for your input
It's on several images, but not all, and none in sequence on the same roll. Yes, I tried the lens on my D7100 and the aberration is not there. I'm thinking you're right about the lab. With the snow storm heading our way, I'll have plenty of time to check out the other rolls. One of which is with my Contax G2, so, if it's there, then it's the lab for sure. Thanks Kevin
Looks like 'Newton's Rings' to me, where the scanner's flattening glass is pressing down on the non-emulsion side of the film. These interference patterns are caused by light interacting with the 2 surfaces so you get a pattern - like you would see on a soap bubble.
Back in the analog days this would happen with some enlargers and the solution was to get a slightly frosted glass called 'anti newton glass' installed.
It is possible that if you asked the operator to scan the film with the emulsion side
flipped over that you might avoid this, and then it's real easy to flip the digital scan in software.
-Jay-
Sometimes I impress myself with newly achieved stupidity It is in all likelihood Newton's Rings. How do I know this? Well, I had very likely incorrectly positioned both the film and the ANR inserts on my V500.
Kevin, congrats, the graffiti is a nice catch for sure! My hometown is literally "bombed" with "bombings" and tags of all kinds. Wish we had some more real graffiti-artists here…
Btw, is your 75-300 the early one with the tiny tripod-mount?
georgms wrote:
Kevin, congrats, the graffiti is a nice catch for sure! My hometown is literally "bombed" with "bombings" and tags of all kinds. Wish we had some more real graffiti-artists here…
Btw, is your 75-300 the early one with the tiny tripod-mount?
It is indeed. Lens performs well, but if your technique is poor, so will any image taken with it. At f/8 its stellar. I keep it for its reach on a crop sensor (450mm is nice). The train car graffiti, I am about 200 feet away (90 meters or so). Image is probably a 10% crop.