fredmiranda.com
Login

Moderated by: Fred Miranda
  New fredmiranda.com Mobile Site
  New Feature: SMS Notification alert
  New Feature: Buy & Sell Watchlist
  

FM Forums | Lighting & Studio Techniques | Join Upload & Sell

  

Archive 2009 · Lowel ID Light NiMH Kit run time??

  
 
zoom2zoom
Online
• • • •
Upload & Sell: Off
p.1 #1 · Lowel ID Light NiMH Kit run time??


bought a new Lowel ID Light NiMH Kit and the battery does not seem to run more than 10 mins before it runs out of power? and its it at full charge ( i think...)

the first 2 mins, it will run full power, then it will dim down as it gradually goes out of power in about 10 mins.

is this battery defective? or this is normal.. on the website, it says it can go 30 mins on 100watt power.

the battery is NMH54XLRNC Nickel Metal Hydride 12 volt 4.5 amp Hour

thanks for the clarification




Dec 26, 2009 at 12:30 PM
howardm4
Offline
• • • •
Upload & Sell: Off
p.1 #2 · Lowel ID Light NiMH Kit run time??


well, that begs the question 'what are you using to charge up the pack?'. How do you *know* it's fully charged?

Did you do 2-3 'slow forming' charge cycles on the battery?



Dec 26, 2009 at 12:49 PM
zoom2zoom
Online
• • • •
Upload & Sell: Off
p.1 #3 · Lowel ID Light NiMH Kit run time??


i use the wall plug charger and it has green and red lights telling me that when only the green light is blinking, then it is at full charge.

it says on the instruction that it will take 3-4 charges before reaching full charge capacity, but mine still can only hold 10 min max charge.




Dec 26, 2009 at 12:53 PM
zoom2zoom
Online
• • • •
Upload & Sell: Off
p.1 #4 · Lowel ID Light NiMH Kit run time??


also.. it says it should take 14 hours for the battery to reach full charge, but mine only charges about 1 hour before the green light starts blinking.. which means it is full charge, supposely...


Dec 26, 2009 at 12:57 PM
howardm4
Offline
• • • •
Upload & Sell: Off
p.1 #5 · Lowel ID Light NiMH Kit run time??


well, either the battery is defective and not taking the charge or the charger is flawed and is 'false peaking' which is telling it to shut off prematurely.

if you have an accurate DC voltmeter, measure the pack voltage after the charger declares the battery 'full'. This should be accurate as I doubt the pack has any sort of voltage regulation.

You should call Bescor on Monday



Dec 26, 2009 at 10:30 PM
michaelbennati
Offline
• •
Upload & Sell: Off
p.1 #6 · Lowel ID Light NiMH Kit run time??


Try to charge and use the Lowel ID Light until battery is drained, then recharge over night. Do this a couple of time and it should gradually become better.
I have the same combo and mine runs about 30 minutes before the battery is in trouble..

Hope this helps.



Jan 02, 2010 at 09:41 AM
zoom2zoom
Online
• • • •
Upload & Sell: Off
p.1 #7 · Lowel ID Light NiMH Kit run time??


battery was sent to Bescor and they determined it was the Charger that was defective and the battery was fine....

i will get it back next week, hopefully will work.



Jan 08, 2010 at 04:33 PM
zoom2zoom
Online
• • • •
Upload & Sell: Off
p.1 #8 · Lowel ID Light NiMH Kit run time??


got the battery and charger back from factory and now its working... they replaced the charger.

per factory specs..it last 30 mins on full 100w power.

do you know around how many cycles will it take before i need to replace the battery?



Jan 11, 2010 at 08:34 PM





FM Forums | Lighting & Studio Techniques | Join Upload & Sell

    
 

Welcome back
Log in to your account