cogitech Offline Dedicated FM Upload & Sell: On
|
p.1 #2 · EOS Conversion for Rokkor 500mm Mirror Lens | |
Remove the old mount and then use JB Weld or crazy glue to stick an EOS-m42 adapter on.
It is that dead simple.
Removing the mount is the only challenge. There are two ways to do this;
1) The right way - The mount is held on by screws that go from the inside, back of the barrel into the back of the mount. To get at them, you have to carefully disassemble the lens until you get down to the empty barrel. Simply remove the screws and the mount will fall off. I did it this way. It was easy.
2) The fast/easy way - Remove the UV (or other) filter from the rear of the lens if there is one installed. Mask off the area by stuffing tissue and using tape. Grind, file, Dremel or otherwise hack off the mount. Clean up the mess.
|