Register · Software · Search · Image Upload · Buy & Sell · Hosting

Moderated by: Fred Miranda
Username   Password

Visit the FM Store · Image Upload · Buy & Sell
FM Forum Rules
FM Forums | General Gear-talk | Join Image Upload
end
Cokin "P" Filter Holder? Go to previous topic Go to next topic
Cableaddict
Offline
Image Upload: On
p.1 #1 · Cokin "P" Filter Holder?


I have always wanted to look into the Lee filter holder system, so as to minimize how many filters I need.

I just discovered the Cokin P-holder. It's "dangerously" inexpensive, which worries me, plus it sounds like a catheter.

Is it a viable alternative, or a piece of junk?

Jun 28, 2009 at 09:27 AM
sjms
Offline
Buy and Sell: On
p.1 #2 · Cokin "P" Filter Holder?


it is also most likely dangerously too small for most of your waaaaaay too many lenses.
you are doing a full frame camera. depending on the lenses you use there will be moderate to severe vignetting at various wide angles. even the Z holder is only good down to about 20mm no matter which way you turn it.

just discovered? the cokin system has been out over 25 years now. i used the P series on my OM system way back and went on to the Nikon from there where i started to find the limitations of even the P mount on W/A lenses

the Lee holder and there associated W/A adapter rings (SWA) can reach down to 16mm on the Canon and Nikon FF bodies with very minor corner vignetting.

Jun 28, 2009 at 01:46 PM
Kiron Kid
Offline
Image Upload: Off
p.1 #3 · Cokin "P" Filter Holder?



I use the Cokin P "wide-angle" filter holder with Hi-tech rectangular ND Grads. It works very well.

Kiron Kid

Jun 28, 2009 at 04:40 PM
Cableaddict
Offline
Image Upload: On
p.1 #4 · Cokin "P" Filter Holder?


sjms wrote:
it is also most likely dangerously too small for most of your waaaaaay too many lenses. .


How'd you know I have waaaay too many?

OK, good to know.
--------------------------

Kiron, what diameter filter does the wide-angle P require?

Jun 28, 2009 at 07:09 PM
sjms
Offline
Buy and Sell: On
p.1 #5 · Cokin "P" Filter Holder?


depending on the lens you are using the Lee and or the Cokin Z holders can add and subtract slots. giving a better FOV. the P holder has 2 models. the standard has more filter slots vs the W/A model with less. the real difference begins with the Lee's adapter rings. they are designed to position the filter assy closer to the front element then the Cokin or any other holder similiarly designed. the cokin has no answer to this rather innovative methodology. the few mm it does give you is really nice to have if you are running the real wide on a full frame camera

lenses on a FF body that benefit from the Lee setup
16-35/2.8 Lee though it requires a 82mm adapter
17-40/4 Lee works beautiful.
24-105/4 either Lee/Cokin Z works
70-200/2.8 either Lee/Cokin Z beautifully
any number of appropriately wide primes.

if you were running cropped (which you're not) it would be no issue but you you are really are thinking the P you will be at or over its limits already. it will be a dead end.



Jun 28, 2009 at 10:31 PM

FM Forums | General Gear-talk | Join Image Upload
end
  Go to previous topic Go to next topic

You are not logged in. Login or Register

  Username   Password  
Lost password?