NC 4.3.2 - FM Forums

Moderated by: guardian

Visit the FM Store · Image Upload · Buy & Sell
FM Forum Rules
Nikon SLRs, primes, and zooms lenses reviews

FM Forums | Nikon-mount SLRs | Join Image Upload

2 end

Glenn01
Offline
Image Upload: Off

p.1 #1 · NC 4.3.2

Looks like I have to dig out my manual for this program again

. After hearing Jack and John's comments regarding the latest NC version, I upgraded. I must say, I think Nikon has radically improved this version in terms of speed! I am using the D-Lighting feature in a couple of tests of the new version, and it's gone from 30 seconds to 2 minutes for processing down to a second or two! That's quite an improvement, so I'm going to continue using NC for a while. I've maintained that the manufacturer's program is likely to be better in terms of actually dealing with its own files, but NC was so terribly slow for me that it made no sense to actually use it when ACR was getting the job done for me. This is all changed now, so I'll revert back to NC for a bit and see how things go. Thanks guys

FWIW

.

Glenn

Edited on Nov 28, 2005 at 06:43 PM

Nov 20, 2005 at 04:57 PM

andylaiphoto
Offline
Image Upload: Off

p.1 #2 · NC 4.3.2

Are you working on PC? I couldn't find that update for Mac.

Edited on Nov 28, 2005 at 06:43 PM

Nov 20, 2005 at 11:46 PM

John Rougeux
Offline
Image Upload: Off

p.1 #3 · NC 4.3.2

Scroll down on this page>

http://support.nikontech.com/cgi-bin/nikonusa.cfg/php/enduser/std_adp.php?p_faqid=61

Edited on Nov 28, 2005 at 06:43 PM

Nov 21, 2005 at 12:45 AM

brandofamily
Offline
Image Upload: Off

p.1 #4 · NC 4.3.2

NC 4.4 is supposed to be coming out w/ the D200.

From the D200 review:

Nikon PictureProject and Capture 4.4 Software
The D200 will include a complimentary copy of Nikon’s PictureProject software, a $49.95 value, and an easy-to-use yet powerful software application that provides image transfer, organization, editing, and design functions for JPEG and NEF (RAW) images produced with the camera. PictureProject can also convert NEF (RAW) files to JPEG or TIFF format finished files, as well as save in the original NEF file format. PictureProject is an essential accessory and is compatible with the new D200 and all prior Nikon digital SLR models and Coolpix Models. The D200 is also compatible with Nikon Capture 4.4 software (sold separately), a new version of Capture that has the specifications to open NEF files from the D200 and all other Nikon digital SLR models. This newest version features greatly enhanced NEF (RAW) processing capabilities as well as Nikon Capture Camera Control that allows remote camera operation when connected to a computer via the included USB cable or wirelessly using the new Wireless Transmitter WT-3 (sold separately). This versatility is especially useful when photographers may need to continue shooting with their D200 while simultaneously having someone else edit incoming images.

Version 4.4 of Nikon Capture software offers a flexible, stable and creative workflow approach for any photographer in both
professional and personal use through Nikon’s unique approach referred to as the "Camera to NEF to Capture Dynamic Link"performance. Newly added features for Capture include automatic highlight recovery when using Exposure Compensation at values lower than 0 EV and Black and White conversion support in Tone Compensation

Edited on Nov 28, 2005 at 06:43 PM

Nov 21, 2005 at 01:08 AM

John Rougeux
Offline
Image Upload: Off

p.1 #5 · NC 4.3.2

I'm going to give up on NC as soon as Aperture arrives.

Edited on Nov 28, 2005 at 06:43 PM

Nov 21, 2005 at 01:27 AM

ytwong
Offline
Image Upload: Off

p.1 #6 · NC 4.3.2

why choose Aperature over NC? it's not even arrived....

it'd be great if 4.4 've highlight recovery as good as CS2....or if CS2 can correct CA just like NC4 do.

Edited on Nov 28, 2005 at 06:43 PM

Nov 22, 2005 at 08:22 AM

BugLightGeek
Offline
Image Upload: Off

p.1 #7 · NC 4.3.2

What's 'Aperature' ?

Edited on Nov 28, 2005 at 06:43 PM

Nov 22, 2005 at 04:17 PM

G-Force
Offline
Image Upload: Off

p.1 #8 · NC 4.3.2

BugLightGeek wrote:
What's 'Aperature' ?

See Here

Edited on Nov 28, 2005 at 06:43 PM

Nov 22, 2005 at 04:29 PM

Doug Quance
Offline
Image Upload: Off

p.1 #9 · NC 4.3.2

I wish Nikon would allow the version 3 users a little price break to upgrade to version 4.

I don't think someone who purchased version 3 a little before version 4 was released should have to pay full price for it, IMO.

Edited on Nov 28, 2005 at 06:43 PM

Nov 22, 2005 at 04:55 PM

biggstr6
Offline
Image Upload: Off

p.1 #10 · NC 4.3.2

Im kinda out of the loop , maybe someone can help.
I have 4.3.1 ,but cant seem to download 4.3.2 .

Do you have to purchase thie version? Or am I just hitting a glitch at the moment?

Edited on Nov 28, 2005 at 06:43 PM

Nov 22, 2005 at 05:44 PM

Wingspar
Offline
Image Upload: On

p.1 #11 · NC 4.3.2

Talk about being out of the loop in keeping NC upgraded. I just looked, and I’m running 4.1.0. I don’t see any info on the Nikon site about updating 4.1.0, but looking a little deeper, it looks like I can use the 4.2.1 full to upgrade my 4.1.0. The Nikon site is a little vague about this, but has anyone done this, and will this load as a demo, or will it see the full licensed version of 4.1.0 on my computer, and upgrade it, then allowing me to upgrade to 4.3.1 then to 4.3.2?

Edited on Nov 28, 2005 at 06:43 PM

Nov 22, 2005 at 09:18 PM

Jack OBrien
Online
Image Upload: Off

p.1 #12 · NC 4.3.2

I have the NC 4.0 on CD. There are a series of upgrades to get it to the latest version, but they're all there.

Jack

Edited on Nov 28, 2005 at 06:43 PM

Nov 23, 2005 at 03:15 AM

lxdesign
Offline
Image Upload: On

p.1 #13 · NC 4.3.2

Hey Glenn,

don't really use NC4.3.2 - although I have it. I much prefer CS... I just like that workflow better for some reason, I can import the RAW and start working on it right away.

lx

PS: 6 Hours of sunlight in Iqaluit - just checked with Environment Canada... today the sun rise is 8:24am and sunset is 2:17pm I leave Sunday!

Edited on Nov 28, 2005 at 06:43 PM

Nov 23, 2005 at 03:45 PM

Bert MacGregor
Offline
Image Upload: Off

p.1 #14 · NC 4.3.2

Wingspar wrote:
Talk about being out of the loop in keeping NC upgraded. I just looked, and I’m running 4.1.0. I don’t see any info on the Nikon site about updating 4.1.0, but looking a little deeper, it looks like I can use the 4.2.1 full to upgrade my 4.1.0. The Nikon site is a little vague about this, but has anyone done this, and will this load as a demo, or will it see the full licensed version of 4.1.0 on my computer, and upgrade it, then allowing me to upgrade to 4.3.1 then to 4.3.2?

I've been doing the updates/upgrades as they come along and but don't remember anything out of the ordinary.

From Nikon Canada: Nikon Capture 4.3.1 or later must be installed before proceeding with this upgrade. If you are using an earlier version of Nikon Capture 4, please update to version 4.2 and then 4.3.1 before proceeding with this update. If Nikon Capture version 4.3.2 is to be used in combination with Nikon View, please be sure that you are using Nikon View version 6.2.0 or later for full compatibility of latest functions.

It doesn't load as a demo and the installer should see your licenced version.

Edited on Nov 28, 2005 at 06:43 PM

Nov 23, 2005 at 08:13 PM

Wingspar
Offline
Image Upload: On

p.1 #15 · NC 4.3.2

Bert MacGregor wrote:

It doesn't load as a demo and the installer should see your licenced version.

Thank you. I’ll give the upgrade a try when I get back from the holiday.

Edited on Nov 28, 2005 at 06:43 PM

Nov 23, 2005 at 10:27 PM

Glenn01
Offline
Image Upload: Off

p.1 #16 · NC 4.3.2

Awww nuts. OK, I take it back. One of the things I really dislike about NC is that it doesn't have nearly as nice a preview window as ACR. I get really small thumbnails that are not adjustable in size. After using it for the past week, I must admit I don't find I can work with it nearly as well as I do ACR in all honesty. I get too much a "digital" look in NC, and while there's greater flexibility in adding saturation in NC, I don't find the end results to be as pleasing as what I get in ACR. I'm certain there are folks who find NC very much better than ACR, so I guess this is one of those things that some folks like it hot, some like it cold

. Back to ACR

.

Glenn

Edited on Nov 28, 2005 at 06:43 PM

Nov 26, 2005 at 02:42 AM

David R
Offline
Image Upload: Off

p.1 #17 · NC 4.3.2

Glenn,

Not sure what the issue is with small thumbnails in NC. If you're in multi-edit mode where you have thumbnails across the top the size is adjustable. Not trying to argue with you, I'm just not sure what issue you're having with the image size.

Edited on Nov 28, 2005 at 06:43 PM

Nov 26, 2005 at 02:42 PM

jmcfadden
Online
Image Upload: On

p.1 #18 · NC 4.3.2

Glenn

Nikon View makes it easy to adjust the image sizes , do not have the issues you do. For me ACR is softer, the contrast never is right, the color is never the same, the details are muddy, it just does not at all deliever the goods for me like NC does. But I took the time to really get to know them both . I use ACR for proofing for a job , and I use NC for the keepers

J

Edited on Nov 28, 2005 at 06:43 PM

Nov 26, 2005 at 07:01 PM

brandofamily
Offline
Image Upload: Off

p.1 #19 · NC 4.3.2

John, when are you going to write that "How To" manuel for NC?

Edited on Nov 28, 2005 at 06:43 PM

Nov 26, 2005 at 07:33 PM

Glenn01
Offline
Image Upload: Off

p.1 #20 · NC 4.3.2

Blast, you guys are giving me whiplash

! Actually, let me ammend that - I'M giving me whiplash.

I still find the thumbnails to be much more adjustable (and much larger) in ACR (unless there's something I'm missing - very possible), and I still find NC slow. HOWEVER, I must admit, it now does a nicer job on the processing. OK, time to read the manual again from cover to cover and get this sorted out. Thanks for the feedback guys. Much appreciated as always.

Glenn (<-- and I'm 100% certain that I am pretty sure that I really am Glenn - I think

)

Shot today w/D2X and processed initially in NC

This image is copyrighted by the owner

Edited on Nov 28, 2005 at 06:43 PM

Nov 26, 2005 at 09:26 PM

jmcfadden
Online
Image Upload: On

p.1 #21 · NC 4.3.2

Glenn

what application are you talking about when you are referring to the thumbnails Glenn?

I use Bridge to look at the thumbs and then right click to pull down Open in Nikon Capture , pretty simply way to do it really, but Nikon View does a good job of displaying the thumbs and there is a slider at the top of the application window to scale the thumbs there

J

Edited on Nov 28, 2005 at 06:43 PM

Nov 26, 2005 at 09:43 PM

Glenn01
Offline
Image Upload: Off

p.1 #22 · NC 4.3.2

NC is what I'm referring to in this case. Bridge allows me larger thumbnails I've found. However, I didn't realize you could open the files from ACR in NC. I'll have a go at that. That would be really great! Thanks John,

Glenn

Edited on Nov 28, 2005 at 06:43 PM

Nov 26, 2005 at 10:50 PM

Glenn01
Offline
Image Upload: Off

p.1 #23 · NC 4.3.2

Ahhh, very cool! OK, as I said before, time to RTFM to get all I can out of this

. Thanks John, appreciate the head's up

.

Glenn

Edited on Nov 28, 2005 at 06:43 PM

Nov 26, 2005 at 10:52 PM

Glenn01
Offline
Image Upload: Off

p.1 #24 · NC 4.3.2

OK, here's something I'm finding incredibly frustrating, so if there's an answer for this I'd like to hear it. Processing an image in NC. I want to set a custom colour temp of 5500K. I start to type and get 55, and then a message pops up on the screen saying I need at least 4192 (or something like that), and I wait forever for it to set the image to that setting. Finally, the last 2 zeroes appear in the window and it goes through the process again of reanalyzing the image while it changes the colour balance. This is what I mean about the program being slow and dodgy. What am I missing here?

Glenn

Edited on Nov 28, 2005 at 06:43 PM

Nov 26, 2005 at 11:00 PM

Beef
Offline
Image Upload: Off

p.1 #25 · NC 4.3.2

That sounds like a slow PC issue to me. I get the same thing if I type two numbers for WB and pause, but if I type four numbers in sequence, it processes it just fine.

What are you running for RAM? Have lots of other programs open? When I work in NC, I typically only have winamp and maybe one internet browser open if that as I'm only running on a gig of RAM.

Edited on Nov 28, 2005 at 06:43 PM

Nov 26, 2005 at 11:29 PM


FM Forums \| Nikon-mount SLRs \| Join Image Upload 1 2 end