turnert Offline Image Upload: Off
|
p.1 #1 · Add another dead D2H to the database | |
My D2H suffered autofocus and meter failure today, just a few weeks after getting my D2X and getting my D70 back from Nikon for major repairs. The timing was good I must say.
The autofocus racks the lens in and out but can't lock on the subject. I can meter in manual, but once I get the exposure right the meter says that I should be several stops underexposed. In other words, the meter is overexposing by at least 3 stops. My camera suffered the 'ERR" message when the first round was fired on the very first day I got the camera last December, so I had a feeling mine was going to blow a gasket early.
If anyone is keeping track of D2H failures, I just dropped a jpeg into Opanda EXIF and it says only 3,196 clicks.
My question is: does Nikon simply repair the camera with parts of the same design? If so, the camera may eventually suffer the problem again. Or have the problem parts been reengineered so that I can expect the repaired camera to be more reliable?
Edited on Oct 24, 2005 at 12:44 AM
|