...I just got my Mark II from Wolf Camera and put in a card and the picture total said 7955 and the time and date was set...all the software and everything in the box looked unopened...just checking.
If a previously used card was put in the camera, it would pick up the number and start from there. This might be the case for you. I don't remember if my Mark II came with the date and time set, so I can't help you there.
But what happens when you get a 2nd card whilst the 1st is sitting in your bag? does it keep the number and keep going or does it go back to number last used?
So, if you start with a clean card, and shoot up to image #1234, and then put in a card with image #5678 on it, the next shot will be #5678 on that card.
Now, you insert a card with image #4321 on it, the next image will be #5679. You shoot up to image #5712
Now if you put a card on it with image #8743 on it, the next shot will be #8744, and so on.
NOTE: This occurs even if the card came from a second body, with a different prefix on it.
Charlie, you didn't tell us if you used a blank CF card or not.
If the card was blank, shouldn't the camera have started where it last left off, and so maybe this really is a used camera?
I use two CF cards in my 10D, and the picture count has always progressed sequentially (I'm up to about 14,000). But I always either delete all the photos on a card or format it before use.
It was a used card...I went back and looked at my last photo with my Rebel and it was the # before the first shot with the Mark II
Thanks for asking about Bethany...poor little girl is having a hard life you can see the up dates on my Pbase Site also my sister's neighbor started another site for her http://www.bethanyslife.org/ check out the news story that a local news station did on her...the link is on both sites.
I format the card as soon as i have backed up the images to DVD via the in camera menus on ym 10D! I have enver had a problem witht he file numbering, it is now reaching 20k and still going great!