fredmiranda.com Login
This topic is in the 2010 archive. You can read it and like its posts here. It is read only.

Archive 2010Nikon 24-70 f2.8 stiff zoom ring fix / repair

  
 
jberry
Offline

p.1 #1Nikon 24-70 f2.8 stiff zoom ring fix / repair
Hello,

Yesterday I fixed my stiff zoom ring using some white lithium grease it was my first time doing this, but not the first time taking a lens apart. I also asked my friend to record it using his 7d in 1080p. I asked an authorized Nikon repair center if they can repair it but they said it was caused by trauma and its not covered under warranty. I was like what?!? no way did I ever throw or even be ruff with this lens oh well, here is the video hope this is helpful to some ppl.

Nov 21, 2010 at 06:35 AM
hans98ko
Offline
Details
p.1 #2Nikon 24-70 f2.8 stiff zoom ring fix / repair
Got the same lens on my D3x and sure is nice to know it is that simple to remove the front element group.

Just a word of caution for those who are doing it themselves. Do not apply too much grease or you might encounter degassing with little bubble or film like looking thing around the lens if it is use or store in hot weather.

I am curious why Nikon never offer to have it lubricated if they knew it is such a simple matter to booze customer satifaction especially for a N lens user?

I recently visited their service center in Singapore and found that they have improve their service here compare to the last time I visited them before I switch to Canon FF DSLR for a period of time.

That's the good thing for not being loyal or fanatic to any brand. Go where it offer you the most for your money.

A BIG THANKS!
Nov 21, 2010 at 07:03 AM
Justin Huffman
Offline
Details
p.1 #3Nikon 24-70 f2.8 stiff zoom ring fix / repair
cajones
Nov 21, 2010 at 08:47 AM
jberry
Offline
Details
p.1 #4Nikon 24-70 f2.8 stiff zoom ring fix / repair
yeah I made sure not to apply that much grease very very little paper like. the lithium based grease will melt at temperatures over 350* F. So its good to use for the lens but again very little.
Nov 21, 2010 at 09:49 AM
gvg45
Offline
Details
p.1 #5Nikon 24-70 f2.8 stiff zoom ring fix / repair
FWIW, I had a similar stiff zoom ring on a 24-70. I sent it to Nikon El Segundo and it was repaired under warranty.
Nov 21, 2010 at 10:08 AM
loudtiger
Offline
Details
p.1 #6Nikon 24-70 f2.8 stiff zoom ring fix / repair
holy crap...
Nov 21, 2010 at 10:15 AM
Todd Adamson
Offline
Details
p.1 #7Nikon 24-70 f2.8 stiff zoom ring fix / repair
Nice video.

You should wear some tight medical latex gloves instead of those wrinkly rubber lunch-lady ones.
Nov 21, 2010 at 10:54 AM
mach250
Offline
Details
p.1 #8Nikon 24-70 f2.8 stiff zoom ring fix / repair
Wow, glad we have such a helpful customer service center for repairs...
Nov 21, 2010 at 12:27 PM
mfletch
Offline
Details
p.1 #9Nikon 24-70 f2.8 stiff zoom ring fix / repair
When the 18-200VR was released it was hard to get. I finally got a new copy. It had a rather large shiny "something" in the inside the center of the front element. Rather than send it back and get on another waiting list, I removed the front element(it was simply threaded in). I removed the large speck, cleaned the element properly and re installed it and the lens was great after that. I wouldn't be so brave to take a screwdriver to lens and strip it down like that. Glad it worked well for you.
Nov 21, 2010 at 12:47 PM
jberry
Offline
Details
p.1 #10Nikon 24-70 f2.8 stiff zoom ring fix / repair
Thanks mfletch, I did open up some canon lenses before to clean dust from it, like the 28-135mm IS one.

Thanks Todd, those were the only gloves I had lol and yeah there were lose.

gvg45, I guess some authorized nikon centers do the repair and others say its the customers fault I just didnt want to miss any good pics when Thanksgiving and Christmas is coming up.

My 24-70 is smooth now and the IQ is still sharp and spot on. Downsides is that the resell value will go down and warranty is gone.

-James
Nov 21, 2010 at 09:45 PM
mach250
Offline
Details
p.1 #11Nikon 24-70 f2.8 stiff zoom ring fix / repair
Is there a security strip torn after opening to void it?
Nov 21, 2010 at 10:32 PM
jberry
Offline
Details
p.1 #12Nikon 24-70 f2.8 stiff zoom ring fix / repair
I did not see any security strip at all. I guess Nikon can see some marks on the screws as one of them almost became bald lol cuz it was so tight. So not too sure how they can tell? There was some red residue or marking on the screws, so maybe locktight or there way of telling it was tampered with.
Nov 22, 2010 at 12:36 AM
MikeW
Offline
Details
p.1 #13Nikon 24-70 f2.8 stiff zoom ring fix / repair
i loved the part where you dropped the screw, my jaw dropped. Was interesting to watch, thanks
Nov 22, 2010 at 12:51 AM
Zach B.
Offline
Details
p.1 #14Nikon 24-70 f2.8 stiff zoom ring fix / repair
James,

When you were taking the lens apart, did you notice where any outer plastic parts of the lens were fastened or connected from the inside? I'm currently looking at a 24-70 that has some wiggle in the end plastic piece that the lens hood connects to. I could probably get the lens at a good price since its got that defect, but I'm only interested in it if its something I feel that I can fix. I was wondering if something has possibly come loose and could be tightened from the inside. Any thoughts?
Jan 21, 2011 at 11:16 PM
Paul.K
Offline
Details
p.1 #15Nikon 24-70 f2.8 stiff zoom ring fix / repair
I like how you were all cool and composed until the tiny screw hit the glass. Still, I am impressed.
Jan 22, 2011 at 11:15 PM
FM ForumsNikon ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister