Looks like they grind them from other Canon screens and even one from a Nikon K3 screen..... looks pretty straight forward with good instructions on how to change it....
I wouldn't mind having a split-image microprism.....
Nothing's impossible... after all, there IS a focusing screen already in there.... and someone installed it.
The question is, was the engineering on this aftermarket product done well enough that the results are not pure crap?? Hence my posting..... maybe I'll have to spend $75 bucks to find out, but hopefully someone in here has already played with this....
Here's a link to their instructions complete with pictures of the install procedure as well as pictures through the viewfinder with one of their screens installed...
a somewhat crazy idea...how about doing this:
1 buy a stock EG-S screen
2. cut/trim the EG-S screen to the size of the 7D screen
3. take out the stock 7D screen
4. 'glue' the modified screen in place
cheve wrote:
how about doing this:
1 buy a stock EG-S screen
2. cut/trim the EG-S screen to the size of the 7D screen
3. take out the stock 7D screen
4. 'glue' the modified screen in place
I had experiences with replacing the focusing screen for the 7D and posted my comments in the following post. You shouldn't have to modify an existing screen. There are several places that you can buy the split prism focusing screen for the 7D but I would only recommend Katzeye (I have tried, didn't like and would not recommend brightscreen.com and the Ebay one).
Installing the screen is fairly easy to do. The only two issues are: 1. You have to deal with dusts. Make sure to use the blower on the screen before doing the installation and 2. You may have to reinstall to make sure the split prism is center with the center focus point... Otherwise, it's very annoying to have it off center.