fredmiranda.com Login
This topic is in the 2010 archive. You can read it and like its posts here. It is read only.

Archive 2010Arca Swiss P0 Review

  
 
btaki
Offline

p.1 #1Arca Swiss P0 Review
I couldn't find any user reviews on the new P0, having recently bought one I'm going to post some initial impressions and maybe a detailed review in a couple of weeks or so.

First off, the P0 is small (about the size of a Markins Q3), feels solid in your hand with the usual high quality silky smooth Arca finish. The panning base is smooth without any play the small knob doesn't feel small and can lock the base in a couple of turns.

Operation: the head I received needed to be calibrated, it was stiff and jerky at the minimum friction setting with a Nikon D300 + Sigma 50mm macro, replace the 50mm with the 180mm macro and things are a lot better, the head became smooth at the lowest friction setting. I'll write a more detailed review on friction with different lenses (12-24, 18-105, 70-300mm VR, Sigma 100-300mm F4, 50mm and 180mm macro) once it comes back from Precision Camera Works.

Just for the fun of it I'm attaching a couple of shots comparing this head to the Manfrotto 400 Geared head.
Jan 22, 2010 at 08:01 AM
rickberk
Offline
Details
p.1 #2Arca Swiss P0 Review
I'm looking hard at this head now for use on a Gitzo 1541T. Now that you've had it a while, what are your thoughts? I was going to get the new Sideclick QR system, but I really hate having to ditch my older Arca Swiss QR plates. What plates are you using?
Apr 02, 2010 at 09:25 PM
lou f
Offline
Details
p.1 #3Arca Swiss P0 Review
rick check out the kirk replacement clamps, they have loads of different methods of attachment, bound to have one suitable for the po.

http://www.kirkphoto.com/Specialty-Quick-Release-Clamp-List.html
Apr 03, 2010 at 04:10 AM
sjms
Offline
Details
p.1 #4Arca Swiss P0 Review
its good to here that brand new it immediately cost you time and money to return for adjustment or as you like to put it calibration. sounds like my type of must buy gear.
Apr 03, 2010 at 07:07 PM
surf monkey
Offline
Details
p.1 #5Arca Swiss P0 Review
This looks very interesting.

How exactly does this head connect to the camera?
Is this the same width as the Q3 (not including knobs)?
I think the Q3 is good, but far from perfect on my Gitzo Traveler.
Apr 16, 2010 at 12:00 AM
sjms
Offline
Details
p.1 #6Arca Swiss P0 Review
there are multiple methods
1- direct attachment via the 1/4-20 thread in the image
2- adapter from 1/4-20 to 3/8-16 and/or whatever your flavor AS type clamp you wish.
3- via the new AS plate/clamp system
Apr 16, 2010 at 04:16 AM
FM ForumsPhotography Gear & AccessoriesJoin Upload & Sell
  
 

You are not logged inLog inRegister