fredmiranda.com Login
This topic is in the 2009 archive. You can read it and like its posts here. It is read only.

Archive 2009canon lens lock pin won't lock

  
 
dmcphoto
Offline
Details
p.2 #1canon lens lock pin won't lock
I had this happen to the release pin on the lens side of a 1.4x teleconverter. Since those have a lever on the side that's attached to that pin I could push it out, but every time I mounted a lens on it the pin would stay in and not lock the lens. At the time I had a friend who was a retired watch maker. Really. As mentioned above, he used a toothpick to transfer the smallest amount of oil to the pin, worked it in by moving the pin up and down, and it worked fine from then on.
Feb 11, 2020 at 03:12 PM
runamuck
Offline
Details
p.2 #2canon lens lock pin won't lock
Be thankful it sticks inside the camera. If it failed to retract that could be very expensive.
Feb 11, 2020 at 11:56 PM
FM ForumsCanon ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister