Mark, if you have the settings for all the focal lenghts, you can create a new profile, so it's not problem, as long as you still know the focal lenghts applied in the shots. Some paper and pen might be a good help when shooting...
If you limit your use to only 14mm, 19mm, and 24mm, and have profiles built in either Lensfix or PT Lens, then you can try just three settings to see which one does the proper job.
that's really not what I'm looking for; I'd rather invest a bit of time to calibrate; either for PTLens/Lensfix, then PTGui's lens-settings can be applied, as this is the same family; or with Lenscorrector from www.proxel.se. Easy with the later tool to calibrate a lens
That's 11 settings. Sure, you can easily make profiles for all of them, but when you are out shooting, I would think it would be difficult and cumbersome to track each exposure and focal length. For my zooms, I just make profiles for the focal lengths marked on the barrel, and when shooting in the field, I try just to use those to keep things simple.
The Proxel software looks cool. Can it deal with complex mustache/gull wing distortion?
Beeing a architecture photographer, I'm interested in the Sharpness curvature of field of that lens; I noticed some canon lenses having different one's, than some other brands.
Some of the delays in recent supply have been cause by a redesign of the Chinese Elefoto/Fotodiox Nikon adaptor, but my batch of the new designs has been confirmed as having shipped over a week ago, so we should be back in business.
I have now also secured an alternate source of the original adaptors and have a batch en-route also. So, all in all, we should very soon now be in the position of being able to offer Canon users the 14-24G adaptor ex-stock – painlessly.
Apologies to everyone kept waiting. Thanks for your patience!
Mark. any raw idea about the appearance of the lever version?
I might need the lens in September.....
from the other thread:
"......additional 1 Series AF-enabling pin..... "
Do you mean by that the special pin, which is required for the D-series only; cause they have a slightly different mount? So the same function as the cardboard, proposed by happypagehk, on early YCZ-adaptors?
HappyPage actually performs the chip and pin modification for our G-EF adaptor. On a 1Ds, the AF-confirm on-adaptor chips don't work properly unless a microswitch inside the lens mount is activated first. On a 5D, it's not required, but I decided to spec every adaptor with it (at greater cost!) so 5D upgraders won't be caught out.
does the white cardboard indicates the microswitches position?
http://imago.macbay.de/G-EOS/AF_confirm.jpg
Very good you added this AF-enabling pin, as I stopped using the the "AF-confirm on-adaptor" in AF-mode: taking the little cardboard away when changing from the exotic lens to a canon lens, was a hazzle. AFAIK some canon lens need that microswitch beeing in the other position.
Glad to here supplier issues are clearing up. I've got an extended photo trip starting July 15. If I can get an adapter before that date, I'm ready to order. (You can let me know by PM)
The outlook is more promising on the supply front: Fotodiox are expecting a large batch of adaptors any day now. But given the troubles of the last few months, I'm reluctant to make firm promises until I have them in my hand. We have a saying in England: don't count chickens until they hatch.
hubsand wrote:
The outlook is more promising on the supply front: Fotodiox are expecting a large batch of adaptors any day now. But given the troubles of the last few months, I'm reluctant to make firm promises until I have them in my hand. We have a saying in England: don't count chickens until they hatch.
Take your time, I only recently ordered but I am eyeing to use it with a yet unpurchased nikon 200-400 F4.
weekh: your adaptor was shipped a week or two ago . . . I'll try to get the tracking details.
We're now obtaining the base adaptors from two sources, one of which has promised to turn around orders of 50 in less than two weeks, which would be an immense relief. The only problem I'm now dealing with is that HappyPageHK (Rudolf) has stopped producing AF confirm ships for the foreseeable future . . . I think I'm going to have to buy the chips in bulk and get them installed at the fabricators. Any useful contacts appreciated . . .
