fredmiranda.com
Login

Moderated by: Fred Miranda
  New fredmiranda.com Mobile Site
  New Feature: SMS Notification alert
  New Feature: Buy & Sell Watchlist
  

FM Forums | Lighting & Studio Techniques | Join Upload & Sell

       2       3       4       end
  

Archive 2008 · Official DIY Sandbag Thread

  
 
Littlebike
Offline
• • •
Upload & Sell: Off
p.1 #1 · Official DIY Sandbag Thread


http://dale-murray.com/DIY/sandbags/image/sandbags-28.jpg

Unfortunately my DIY instructions are not as professional as my bag results but these should get you going the right direction.

I purchased my Cordura from: http://www.questoutfitters.com

I prefer Coats and Clark Upholstery Thread, it is synthetic and extremely strong.

Sandbag PDF can be downloaded here: http://dale-murray.com/DIY/sandbags/sandbags.pdf

I have had a few people inquire about getting empty sewn bags from me, if interested just email me.

(Moderator, if there is something wrong with the above sentence please delete the sentence and not the entire thread.)

http://dale-murray.com/DIY/sandbags/sandbag_instructions.jpg

Edited by Littlebike on Jan 29, 2008 at 05:08 PM GMT

Edited on Jan 29, 2008 at 05:08 PM



Jan 29, 2008 at 01:58 PM
claudermilk
Offline
• • • •
Upload & Sell: Off
p.1 #2 · Official DIY Sandbag Thread


Very cool, thanks for the post.


Jan 29, 2008 at 02:30 PM
TJ Asher
Offline
• • • •
Upload & Sell: Off
p.1 #3 · Official DIY Sandbag Thread


Your bags are as good looking as any I've purchased in a store and MUCH nicer looking than my own DIYers.

Do you have any issues with the sand leaking when tossing them around? Mine get tossed quite a bit. I'm not gentle on them.



Jan 29, 2008 at 02:47 PM
Littlebike
Offline
• • •
Upload & Sell: Off
p.1 #4 · Official DIY Sandbag Thread


I have not really had an opportunity to toss these around, I just started making them about a 10 days ago, though, a the friend who works in the television industry told me he would never suspect they were home made and things they look great. I used one of his as a model.

I do not imagine there will be any issues, though, as:
- all joints are fully sewn at at least 15 stitches per inch.
- the sand is inside a thick freezer bag inside the cordura.
- the cordura is water proof
- I suppose I could improve the design by folding over all joints creating a u-shaped barrier for the sand along the long seam.

The weakest point on these bags is the final sewing step after inserting the sand, that is basically a single stitch holding the mouth of the bag closed - all the weight is hanging on that stitch.

If durability in this area does become a concern it can easily be remedied by folding it over hand hand stitching it - that is how the store bought bags I have seen are done. I say hand stitch because my state of the art machine cannot get in tight enough for another line of stitching.

Everything about these are heavy duty right down to the thread:
http://www.coatsandclark.com/Products/Sewing/Threads/Special+Purpose/Coats+and+Clark+Upholstery+Nylon.htm

I really dont know what else I could make the bags out of to make them stronger and still sew on a non-commercial sewing machine.

Edited on Jan 29, 2008 at 03:29 PM



Jan 29, 2008 at 03:27 PM
ueb0258
Offline

Upload & Sell: Off
p.1 #5 · Official DIY Sandbag Thread


Littlebike, I will preface this with the fact that I am not a sewing person but I wonder if you could put the pouch on the opposite end of the bag on the back side near the handle and use velco or a zipper to hold it closed so that someone could just carry a bag around empty and use rocks or whatever they have handy. Would that be structurely secure?


Jan 29, 2008 at 09:16 PM
Littlebike
Offline
• • •
Upload & Sell: Off
p.1 #6 · Official DIY Sandbag Thread


Actually, I do plan on trying to make something that could easily be transported empty and filled with rocks, sand, or whatever you have around at the time.

It will have Velcro closure (top side) but will in Absolutely no way be nearly as strong as these and all the weight will be hanging off a single layer of Cordura.

Where I could see something like this being REALLY useful is with a tripod and hiking. If you decide to make a long exposure while out on a walk put some rocks in a single chamber bag and hang from the tripod.



Jan 29, 2008 at 10:09 PM
TJ Asher
Offline
• • • •
Upload & Sell: Off
p.1 #7 · Official DIY Sandbag Thread


I have a bag with velcro similar to what you guys describe and the velcro for each side is near the handle.


Jan 30, 2008 at 12:20 AM
caleb condit
Offline
• • •
Upload & Sell: Off
p.1 #8 · Official DIY Sandbag Thread


the only thing that would make them stronger is maybe using a surger for the inside seams first. Velcro might be a better option instead of trying to sew them shut at the end. Plus, you could carry them to remote areas empty and pick up some rocks (or your assistants wallet chain and piercings) and fill them on the spot.

Edited on Jan 30, 2008 at 07:27 AM



Jan 30, 2008 at 07:27 AM
claudermilk
Offline
• • • •
Upload & Sell: Off
p.1 #9 · Official DIY Sandbag Thread


A couple of refinements on your guys' ideas. To help seal the seams, in addition to using a serger, I'd think running bias tape over the seams should help as well. For the open one, why not use heavy-duty snaps or zippers? Still gives support from the top side of the bag.


Jan 30, 2008 at 11:55 AM
Littlebike
Offline
• • •
Upload & Sell: Off
p.1 #10 · Official DIY Sandbag Thread


76 downloads of the PDF and there were only 9 posts? I expected a little more response than this.


Feb 01, 2008 at 08:13 PM
atsi
Offline
• •
Upload & Sell: Off
p.1 #11 · Official DIY Sandbag Thread


Thank you for the time and effort you put into this.


Feb 01, 2008 at 11:46 PM
John Patrick
Offline
• • • •
Upload & Sell: Off
p.1 #12 · Official DIY Sandbag Thread


I was thinking about something like this the other day. Except I had two handles, one off each end by the fold. This allows you to hook a handle over a light-stand post to keep the stand upright.

I also envisioned open-pockets that velcroed shut so that you can add whatever needed to make the weight.

My mother loves to make stuff like that, and I was going to draw it up for her to make me a couple.

John



Feb 02, 2008 at 02:26 AM
cgardner
Offline
• • • • •
Upload & Sell: Off
p.1 #13 · Official DIY Sandbag Thread


Great effort. Given the time, materials, and planning that go into making them why not just also incorporate a zipper? That would eliminate the tedious last step of feeding a 20lb bag through the machine..

Here's a alternative design--

http://super.nova.org/TP/Bag.jpg

Fold the fabric accordion-style to form the two sections then attach each side of zipper to one flap (at the top) for access. Strap would be stitched to the bottom piece, directly under the zipper. You'd sew the zipper into the two ends first (after doing the apporiate hemming) next add the strap, then fold it flat and stitch up the edges to close.

My experience with zip-lock bags is that they will, eventually, pop open, so a secondary seal with duct tape might be a good idea.

Did you consider lead/steel shot vs sand. Less volume for the same amount of weight.

Edited on Feb 02, 2008 at 09:10 AM



Feb 02, 2008 at 09:06 AM
TJ Asher
Offline
• • • •
Upload & Sell: Off
p.1 #14 · Official DIY Sandbag Thread


I used lead shot when I made mine a year ago. It turned out to be hard to find and pretty expensive.

Zippers or velcro is an interesting idea.



Feb 02, 2008 at 09:25 AM
Noah Posnick
Offline

Upload & Sell: Off
p.1 #15 · Official DIY Sandbag Thread


Great tutorial. Once I learn to sew I will definitely be making me some sandbags. Or maybe I should just find someone who knows how to sew and ask them to do me a favor... hmmm


Feb 02, 2008 at 02:58 PM
Stefano7
Offline

Upload & Sell: Off
p.1 #16 · Official DIY Sandbag Thread


Littlebike - thanks for taking the time to provide the detailed instructions! Very nice end product. I filled mine with dry beans from Costco (can you say "giant beanbag") just to avoid the sand issue - but I probably lost a bit of weight as a tradeoff. Again, than you!

Steve



Feb 02, 2008 at 03:54 PM
cavis
Offline
• •
Upload & Sell: Off
p.1 #17 · Official DIY Sandbag Thread


Glad to have found this thread. I'm going to download and learn to sew! Nah... I'll download and hit someone up to sew it for me. :-P

Edited on Feb 04, 2008 at 12:14 AM



Feb 04, 2008 at 12:14 AM
Jeremy Reitman
Offline
• • •
Upload & Sell: Off
p.1 #18 · Official DIY Sandbag Thread


edit

Edited by Jeremy Reitman on Jun 18, 2008 at 03:22 PM GMT

Edited on Jun 18, 2008 at 03:22 PM



Feb 05, 2008 at 12:00 PM
mervifwdc
Offline
• • • •
Upload & Sell: Off
p.1 #19 · Official DIY Sandbag Thread


The zippers or velcro would make it very handy for travelling on flights, as you could travel empty. I've done this, then bought large bags of rice in supermarkets whereever I go, an dump it when I go home, or give it to someone if Isee anyone who would use it.

Nice job!

Merv.



Feb 05, 2008 at 12:23 PM
Duncan Staples
Offline
• • • • •
Upload & Sell: Off
p.1 #20 · Official DIY Sandbag Thread


Hey - where is the do it yourself Sherpa thread? I have so many sandbags I can't carry them without a Sherpa

Good thread, good info - thanks.

duncan



Feb 05, 2008 at 09:14 PM
       2       3       4       end




FM Forums | Lighting & Studio Techniques | Join Upload & Sell

       2       3       4       end
    
 

Welcome back
Log in to your account