fredmiranda.com Login
This topic is in the 2007 archive. You can read it and like its posts here. It is read only.

Archive 2007Canon DPP 3.2

  
 
EOS20
Offline
Details
p.2 #1Canon DPP 3.2
jchin wrote:
looscanon wroteUnfortunately, according to the 3.2 pdf file the 20D camera is not supported by the software and I doubt it will be in the future because of the older firmware. Thanks again.
Crap so for those of us with 20D and 40D, does that mean we need to keep a different copy of DPP on different computers so we can work with both cameras? Kind of rediculious if you ask me.


What are you talking about? The 20D still works with the new version, Just the lens correction tool won't work with the 20D files! You can still convert the 20D files as you would have with previous versions.

Nov 03, 2007 at 04:34 AM
gfiksel
Offline
Details
p.2 #2Canon DPP 3.2
Still no arbitrary rotation. Arghhhh!

It's getting to be ridiculous given that practically ALL other image editing packages support it.
Nov 03, 2007 at 06:21 AM
looscanon
Offline
Details
p.2 #3Canon DPP 3.2
What are you talking about? The 20D still works with the new version, Just the lens correction tool won't work with the 20D files! You can still convert the 20D files as you would have with previous versions.

This is correct. I'm sorry in my original post I meant that the lens correction tool in the software does not support the 20D. Everything else works fine.
Nov 03, 2007 at 08:19 AM
Emile Gregoire
Offline
Details
p.2 #4Canon DPP 3.2
gfiksel wrote:
Still no arbitrary rotation. Arghhhh!

It's getting to be ridiculous given that practically ALL other image editing packages support it.

Amazing, isn't it? This is the single most important reason why I won't use it. I always read very good reports on DPP vs. the competition and then try it myself and immediately remember why it is that I don't use it: no arbitrary rotation.

Please send them a note on it - I've done the same. The more they hear the same complaint the better.


Nov 03, 2007 at 10:02 AM
Alan Kefauver
Offline
Details
p.2 #5Canon DPP 3.2
"Lens" does not work with .crw files from a D60 even with a supported lens.
Alan
Nov 03, 2007 at 10:09 AM
EB-1
Offline
Details
p.2 #6Canon DPP 3.2
Damn, the display is full screen so you can't see the upper right side along with the histogram. Is this just an XP problem?

EB
Nov 03, 2007 at 10:14 AM
mill4570
Offline
Details
p.2 #7Canon DPP 3.2


IMHO, DPP is still an excellant raw converter for Canon files. Canon has continued to improve the product over the years and the cost fits my budget. The only problem I see with it is I'll be dead before they finally get it completely right.

Richard K.

Nov 03, 2007 at 10:55 AM
Paul Gardner
Offline
Details
p.2 #8Canon DPP 3.2
DPP 3.2 produces the fineist TIFF files I have seen from any of the converters. The improvements in the last 4 years have been tremendous. So it a clunky interface. Just setup your files and than do a batch convert to TIFF. Finish off your processing with whichever editor strikes your fancy.
Nov 03, 2007 at 11:05 AM
lexvo
Offline
Details
p.2 #9Canon DPP 3.2
I would like DPP to show the AF-points, just like FVU does.
Nov 03, 2007 at 11:14 AM
Jan Kristensen
Offline
Details
p.2 #10Canon DPP 3.2
I need some help here. I'd like to learn how to use the lens correction tool for the 3.2 version I just downloaded, so I followed the instructions below and downloaded the DPP pdf manual. However, it only has 52 pages so can't see a list of supported lenses nor does it mention anything about the tool . Where do I find the right pdf and do I really need to go in and adjust the lens correction tool for every single image unless I apply a recipe?

I had a quick play with the tool but am a bit perplexed. The effect of the distortion function is pretty much negligent with the 10-22 lens.
Doesn't the camera remember the shooting distance and if not, why is there no scale on the sliding bar?

I really like DPP but I sometimes struggle with the interface.

Hope you can help me!

Cheers,
Jan


dEmile Gregoire wrote:
looscanon, at the same page you downloaded DPP 3.2, just a bit further there's a link to download the manual (pdf). If not, download from Canon USA: http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct

On page 53 you'll find the list of supported lenses - sorry, Lance, but Canon's software will only support Canon lenses. 32 lenses are there, with some caveats, notably that some lenses will not be supported when coupled with a 5D / 30D.

Nov 03, 2007 at 11:29 AM
dswiger
Offline
Details
p.2 #11Canon DPP 3.2
How come I was able to apply the lens correction tool with my 40D & my Tamron 17-35?
I suspect they may only be looking at the focal lengths and not the vendor name.

Dan
Nov 03, 2007 at 01:02 PM
mill4570
Offline
Details
p.2 #12Canon DPP 3.2
Jan,

The list of lens and cameras is in DPP Help. Just launch the program and click on Help and look for Correcting Lens Abberations. Not a lot of information on using the tool but the camera and lens charts are there.


Richard K.
Nov 03, 2007 at 01:42 PM
Monito
Offline
Details
p.2 #13Canon DPP 3.2
EB-1 wrote:
Damn, the display is full screen so you can't see the upper right side along with the histogram. Is this just an XP problem? EB


No, it is an EB-1 problem.
Nov 03, 2007 at 02:11 PM
dhlewis
Online
Details
p.2 #14Canon DPP 3.2
Paul Gardner wrote:
DPP 3.2 produces the fineist TIFF files I have seen from any of the converters. The improvements in the last 4 years have been tremendous. So it a clunky interface. Just setup your files and than do a batch convert to TIFF. Finish off your processing with whichever editor strikes your fancy.


this is also my normal workflow, I agree with you Paul.

Given the piece of crap that Bridge was in CS2 and how much tweaking is necessary to get ACR close to DPP you guys complain a lot about something that is a no charge upgrade.
Nov 03, 2007 at 04:09 PM
RDKirk
Offline
Details
p.2 #15Canon DPP 3.2
lexvo wrote:
I would like DPP to show the AF-points, just like FVU does.


Why? You know where you focused when you took the picture, don't you? I can only see a purpose for that when doing system testing.
Nov 03, 2007 at 06:29 PM
RDKirk
Offline
Details
p.2 #16Canon DPP 3.2
nathanlake wrote:
Apparently the lens correction does not support the 70-200 2.8 IS....that is hard to believe.



The selection of lenses on the list appears mostly to be those that really need it.
Nov 03, 2007 at 06:36 PM
Emile Gregoire
Offline
Details
p.2 #17Canon DPP 3.2
dhlewis wrote:
Paul Gardner wroteDPP 3.2 produces the fineist TIFF files I have seen from any of the converters. The improvements in the last 4 years have been tremendous. So it a clunky interface. Just setup your files and than do a batch convert to TIFF. Finish off your processing with whichever editor strikes your fancy.
this is also my normal workflow, I agree with you Paul.

Given the piece of crap that Bridge was in CS2 and how much tweaking is necessary to get ACR close to DPP you guys complain a lot about something that is a no charge upgrade.

I really like to stay away from post-processing beyond raw conversion. Lightroom will do that for me but I'd be just as happy with DPP and just a few more controls. Converting all to TIFF and then firing up Photoshop to correct each and every image just doesn't work when you've got 1000 shots to process in a short time. I'm not really complaining though - it's a great product for its price
Nov 03, 2007 at 06:37 PM
picnic
Offline
Details
p.2 #18Canon DPP 3.2
Lance Lee wrote:
looscanon wroteThe lens correction tool in the new 3.2 version doesn't seem to work for me. It does not get highlighted when I try to edit any photo. I tried many different photos with the same results. Both raw and jpeg.
I tried it with a shot from my Tokina 12-24 and it wouldn't work. When I tried an image taken with my friends 16-35/2.8 it worked. So yes, only certain lenses will work.


It only supports Canon lenses--and only some of them. the 16-35 is supported as well as 19 Canon other lenses.

Diane
Nov 03, 2007 at 08:27 PM
Roy Pertchik
Offline
Details
p.2 #19Canon DPP 3.2
gfiksel wrote:
Still no arbitrary rotation. Arghhhh!

It's getting to be ridiculous given that practically ALL other image editing packages support it.


Seems to me your file is going into PS afterwards anyway, and you can rotate as arbitrarily as you want then, w/ no image degradation that I am aware of... I only want a raw converter to do what is advantageous to do before the conversion... I'd rather do selective editing, spotting and cloning, and so forth, non-destructively on isolated layers in PS, and while I'm there, I can rotate if i want.
Nov 03, 2007 at 08:58 PM
lexvo
Offline
Details
p.2 #20Canon DPP 3.2
RDKirk wrote:
lexvo wroteI would like DPP to show the AF-points, just like FVU does.
Why? You know where you focused when you took the picture, don't you? I can only see a purpose for that when doing system testing.


Normally yes. But with 45 AF-points, sometimes I'm not sure which one I choose. And the AF-point are displayed in FVU, and on the LCD of the camera as well.

Edited by lexvo on Nov 04, 2007 at 02:43 PM GMT
Nov 04, 2007 at 05:34 AM
FM ForumsCanon ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister