p.2 #1DxO PhotoLab 10 (10.3) with support for A7R6 compressed RAW file format
Thanks. Got your PM. Will check later when I'm home.
Yes, I know 600/4 + 1.4TC supported as I have been using with previous version of Pure RAW as well as more recent Pure RAW 6 and very latest 6.9.0.
Ist problem found after they offered A7RVI Compressed RAW support.
6.8.0 worked with Lossless Compressed RAW, but could not process Compressed RAW. Could not even get as far as choosing Optical modules.
Canon modules were not installed.
biggles2002 wrote:
your lens is supported
FE 600mm F4 GM OSS with SEL TC1.4x
Sony FE
Since
DxO PhotoLab 7.1.2
Since
DxO PureRAW 3.18
DO you have those Canon modules installed? if so
Go to "installed DxO modules" and delete those Canon ones and try again
p.2 #2DxO PhotoLab 10 (10.3) with support for A7R6 compressed RAW file format
To lend some credibility to my issue with DxO Pure RAW 6.9.0 not identifying Lens (and TC) used correctly:
(With Version 6.8.0, Thumbnails were displayed black and green as reported earlier in this thread and files could not be processed, even with no Lens Corrections Applied)
Information window is from latest version of Sony Imaging Edge.
It should be no surprise it correctly identifies Sony GM 600 f4 and Sony 1.4 TC.
The problem, as shown in the screen grabs, is that DxO gets it wrong with Compressed RAW file format.
With Lossless Compressed RAW it correctly identifies the lens and TC.
This also shows that those Optical Modules are installed.
The Canon Optical Modules are not installed, as can be seen by the "to be downloaded"
p.2 #3DxO PhotoLab 10 (10.3) with support for A7R6 compressed RAW file format
Can you share a Raw file that is not working so we can test it,
I have no problem with the FE400-800+ A7R6 in any of the Raw versions in Pure Raw or Photolab
biggles2002 wrote:
Can you share a Raw file that is not working so we can test it,
I have no problem with the FE400-800+ A7R6 in any of the Raw versions in Pure Raw or Photolab
biggles2002 wroteCan you share a Raw file that is not working so we can test it,
I have no problem with the FE400-800+ A7R6 in any of the Raw versions in Pure Raw or Photolab
Yes I get the same on both mac and windows PC, very odd. Do send DxO support one of your troubled Raw's and they will figure it out.
p.2 #10DxO PhotoLab 10 (10.3) with support for A7R6 compressed RAW file format
DxO say A7RVI Compressed RAW and Compressed HQ are not officially supported, but they will investigate.
Maximum attachment size on their report page is 50MB and they don't use external download links.
They provide a link for me to upload to so I'll do that tonight as file is 57MB.
p.2 #11DxO PhotoLab 10 (10.3) with support for A7R6 compressed RAW file format
biggles2002 wrote:
macOS 27.2.1
Thank you very much for help. PROBLEM SOLVED!
Well, almost certainly solved.
I tested with GM 300 with and without TCs, OK.
Tested bare GM 600/4, OK. Then with 2xTC, OK. Back to with 1.4TC, OK.
Checked problem files, problems remain.
I believe a bad connection with 1.4TC has been isolated as cause.