fredmiranda.com Login

Good Pro Monitor?

  
 
Danpbphoto
Offline
Details
p.2 #1Good Pro Monitor?
ruthenium wrote:
Danpbphoto wrote
ruthenium wrote
Danpbphoto wrote
ruthenium wrote
Danpbphoto wroteNo!
Thanks!
Dan
Then, even if you don't print and don't need Adobe RGB, I would still recommend a display that has all or most of the Display P3 space its native color space.
Display P3 seems to be the default color space of Apple devices. It is considerably wider than the sRGB, and you may want to have the ability to view the colors of jpegs exported with the embedded Display P3 profile.
I assume that you process your photos from raw, when a wide-gamut display is genuinely needed (an sRGB display would not show some vibrant colors).
Dmitri I only use an Apple laptop while drinking my morning coffee or checking "things" during the day.
Any/all photo editing is done on my Windows PC's using PsCC from raw to jpg..
Thanks!
Dan
Dan, where the raw files are processed is irrelevant (even if you had a Linux box).
The concern is all about being able to see what PsCC shows you.
Processing raw files while being partly "color-blind" would be unreasonable.
If I had to replace my older BenQ SW271C monitor by a new one, I would have first checked the specs.
Just for example, the newer BenQ has a "Wide Color Gamut: Covers 99% Adobe RGB, 100% sRGB, and P3 color spaces, allowing realistic representation of blues and greens for nature and outdoor photography" (they didn't mention the reds in the P3 space, for some reason).

If there was a misunderstanding of my post above - I hope I corrected that here.
Dmitri;
Any misunderstanding is on me.

I have become technically ignorant!

I grew up with the cathode ray tube and a crystal radio using my bed springs as it "source"

This is what I would appreciate members, who DO have that expertise, would tell me.

No one is "insulting" me by telling me I misunderstand anything.

A BenQ was on my list....Creative Pro model PV3250U 31.5",4k HDR

If you have a BenQ that would replace your existing monitor what model would it be? I like large monitors 30 or greater.
THANK YOU!
Dan
To be honest my "old" BenQ SW271C has given me no reason to complain, or to replace it.
The specs are more than adequate for photography:

• Resolution & Panel: 3840 x 4,2160 (4K UHD) IPS anti-glare display with a 60Hz refresh rate and 16:9 aspect ratio.
• Color Gamut & Accuracy: 99% Adobe RGB, 100% sRGB / Rec. 709, and 95% DCI-P3 / Display P3 coverage, backed by a 16-bit 3D LUT and ΔE ≤ 2 color accuracy

I feel good about the 27 inch size and don't sense an urge to get a larger screen. Perhaps this is because when deciding whether
...Show more →
I am spending hours trying to make a decision..I have compared the Ben Q SW27-28 and SW321C..Other than size I see no difference(?) and a huge price increase.

But then the Asus ProArt PA32UCDM-K in the running.Yeah I would like the Eizo CE CG319x but $5900?

But this will be my last computer...
Thanks!
Dan

Nov 12, 2026 at 11:41 AM
rico
Online
Details
p.2 #2Good Pro Monitor?
Dan, I was a complete Eizo snob for over 20 years and owned their CRTs including top-of-the line F980. I transitioned to their flat-screen models including a photo-grade 27" just under the CG line. If you want color-critical results because you work in the publishing industry then Eizo is a good value and the versions with inbuild colorimeter will save time. Otherwise, I say skip the Eizo and go for one of the many midline brands which are more than enough for sharing your images on the Web. No-one can see any difference anyway with their econo displays and the JPEG encoding. My daily driver is a 27" Dell UltraSharp U2717D that purchased from B&H for $170. I also have fancier 26" UltraSharp (big spender $450) in the back room. Even my 25" Alienware gaming monitor is more than sufficient for image PP. I also send results to my Canon Pro-2000 (24", 11 -ink set) and the prints look great.
Nov 12, 2026 at 02:35 PM
corposant
Offline
Details
p.2 #3Good Pro Monitor?
Danpbphoto wrote:
But then the Asus ProArt PA32UCDM-K in the running.Yeah I would like the Eizo CE CG319x but $5900?



I have the Asus 32 - the screen is massive however it has its quirks which can be annoying or tolerable. It takes longer than my Dell Ultrasharp to wake up and has handshake issues periodically. It also doesn't work as well with hubs if you use one (I have it chained into a TB enclosure, then into a hub, and that seemed to have helped there). But it's color space and accuracy is phenomenal so when I print it looks exactly like it does on my screen when it's on the paper.

I would take @rico 's advice to heart. If you're only sharing online and casually, it really should not matter much.
Nov 13, 2026 at 10:51 AM
Danpbphoto
Offline
Details
p.2 #4Good Pro Monitor?
rico wrote:
Dan, I was a complete Eizo snob for over 20 years and owned their CRTs including top-of-the line F980. I transitioned to their flat-screen models including a photo-grade 27" just under the CG line. If you want color-critical results because you work in the publishing industry then Eizo is a good value and the versions with inbuild colorimeter will save time. Otherwise, I say skip the Eizo and go for one of the many midline brands which are more than enough for sharing your images on the Web. No-one can see any difference anyway with their econo displays and the
...Show more →
Thank you Rico!
I do NOT do any printing anymore. The new computer cost a bundle!
I saw the Dell's, curved, 30+ inches and I like the looks.

MY MAIN PROBLEM is that the technology has over run me! OLED, 4k, PS3,........it overwhelms me!
Thanks for your advice!

I need to make a decision soon.
Dan
Nov 13, 2026 at 11:08 AM
Danpbphoto
Offline
Details
p.2 #5Good Pro Monitor?
corposant wrote:
Danpbphoto wroteBut then the Asus ProArt PA32UCDM-K in the running.Yeah I would like the Eizo CE CG319x but $5900?
I have the Asus 32 - the screen is massive however it has its quirks which can be annoying or tolerable. It takes longer than my Dell Ultrasharp to wake up and has handshake issues periodically. It also doesn't work as well with hubs if you use one (I have it chained into a TB enclosure, then into a hub, and that seemed to have helped there). But it's color space and accuracy is phenomenal so when I print it looks exactly like it does on my screen when it's on the paper.

I would take @rico 's advice to heart.
...Show more →
Thanks Mike!

My very old NEC SpectraViews are 20 years old but doing well. The calibration system no longer works but not an issue.

As I keep saying, I like a wide monitor. My 30" NEC SpectraViw WQXc(?)3190 qxi I love!
Thnaks MIke!
Dan

Nov 13, 2026 at 11:12 AM
Braindrain232
Offline
Details
p.2 #6Good Pro Monitor?
corposant wrote:
Danpbphoto wroteBut then the Asus ProArt PA32UCDM-K in the running.Yeah I would like the Eizo CE CG319x but $5900?
I would take @rico 's advice to heart. If you're only sharing online and casually, it really should not matter much.


I have an Asus TUF monitor, which covers around 88% of Adobe RGB. I do close to zero printing.

Even with that monitor, when I share pics with others, I've noticed that there are some pics where the details aren't picked up on their screens when it shows up on my monitor.

I wad toying around with getting a monitor with 100% Adobe rgb, but I figure it'd make the problem that I just described even worse.
Nov 13, 2026 at 11:12 AM
Danpbphoto
Offline
Details
p.2 #7Good Pro Monitor?
corposant wrote:
Danpbphoto wroteBut then the Asus ProArt PA32UCDM-K in the running.Yeah I would like the Eizo CE CG319x but $5900?
I have the Asus 32 - the screen is massive however it has its quirks which can be annoying or tolerable. It takes longer than my Dell Ultrasharp to wake up and has handshake issues periodically. It also doesn't work as well with hubs if you use one (I have it chained into a TB enclosure, then into a hub, and that seemed to have helped there). But it's color space and accuracy is phenomenal so when I print it looks exactly like it does on my screen when it's on the paper.

I would take @rico 's advice to heart.
...Show more →
Yes I no longer print but yes I post just for fun..Not a pro and don't need the exacting specs "pros" need in their business.

Can you or anyone reading this explain the cabling to the computer? Thunderbolt, USB..so on..Both my NEC's use the RS232 olde style cables.
Dan

Nov 13, 2026 at 11:18 AM
Danpbphoto
Offline
Details
p.2 #8Good Pro Monitor?
Braindrain232 wrote:
corposant wrote
Danpbphoto wroteBut then the Asus ProArt PA32UCDM-K in the running.Yeah I would like the Eizo CE CG319x but $5900?
I would take @rico 's advice to heart. If you're only sharing online and casually, it really should not matter much.
I have an Asus TUF monitor, which covers around 88% of Adobe RGB. I do close to zero printing.

Even with that monitor, when I share pics with others, I've noticed that there are some pics where the details aren't picked up on their screens when it shows up on my monitor.

I wad toying around with getting a monitor with 100% Adobe rgb, but I figure it'd make the problem that I just described even worse.

Yup! What am I giving up, despite olde outdated monitor tech but extremely reliable and color accurate, by getting the "latest and (somewhat greatest) technology.
Again THANKS!
Dan

Nov 13, 2026 at 11:21 AM
 


Search in Used Dept. 

Taperwing
Offline
Details
p.2 #9Good Pro Monitor?
My primary editing system has two, 27" monitors arranged side-by-side. One is a consumer IPS panel from LG, that calibrates well, but certainly not 99%aRGB. Next to it is, an Eizo CG2730, which has its own hardware calibration. FWIW, I found it cheap on eBay and took a chance. On casual observation, they do not look drastically different.

However, towards the green end, where the Abobe RGB plot extends most drastically from sRGB response, the difference is quite noticeable. This bacame most apparent when I was trying to color adjust images from a local car show, where all vehicles were displayed on the lawns of a public park. Just never could get the greens of the grass to look 'right' on the LG. However, when I slid the same image over to the Eizo, all was right with the world, and I found little adjustment was required.

I'm just a single data point and at one point I was perfectly content with my LG. The Eizo ruined me for lesser color accuracy.
Nov 13, 2026 at 12:02 PM
Dragonfire
★ Featured Winner
Offline
Details
p.2 #10Good Pro Monitor?
Dan, I recently purchased a new Dell (https://www.amazon.com/dp/B0GLJ698SH?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_6) and popped in 64gb of ram and I use it on my 34" NEC with Spectraview curve with a display port cable and am able to switch back an forth with my old pc with the button on the monitor.

All I need until my optometrist does my cataracts.

I keep a 24" NEC with Spectraview in reserve because my wife likes the way the curve looks im the room.
Nov 13, 2026 at 12:18 PM
corposant
Offline
Details
p.2 #11Good Pro Monitor?
Danpbphoto wrote:
MY MAIN PROBLEM is that the technology has over run me! OLED, 4k, PS3,........it overwhelms me!
Thanks for your advice!

I need to make a decision soon.
Dan


Okay - let me try to help you as best I can...

OLED is nice, but it's not a must-have. I personally think an OLED is really nice for a TV where you are watching content and where blooming is irritating and inky-blacks are a must. For a computer monitor used for photography, I don't think it's worth paying for.

4K is definitely worth paying for, which is nice, because most monitors for photography will also be 4K by default.

Color space...

AdobeRGB - critical for printing since printing is done in CYMK and the cyans (and greens) are much wider (viewable) the more of the color space you can see. If you're not printing, something with at least 90% coverage is nice. Don't need to pay for 99%-100%.

DCI-P3/Display P3 (or just P3 for short) - this is a newer space that's used primarily in the film industry but was adapted by Apple for all their displays. More of an emphasis on reds and greens. Due to Apple's influence this has become a very important space for now anyone producing video.

sRBG - basically the default for office/consumer displays, smart devices, social media...basically it's how the non-creative world sees your content.

I think if you can find something with 100% sRBG (easy), very high P3 (not hard), and a decent amount of AdobeRGB coverage, you'll be in good shape.

Maybe something like this? https://www.bhphotovideo.com/c/product/1846476-REG/benq_ma270u_professional_27_4k_ips.html

You shouldn't need to break the bank and if you did want to add a second more print-color accurate monitor later, you didn't go nuts on this one. I am sure somebody can give you better and more specific advice, but that's my 2 cents.
Nov 13, 2026 at 02:00 PM
Danpbphoto
Offline
Details
p.2 #12Good Pro Monitor?
corposant wrote:
Danpbphoto wroteMY MAIN PROBLEM is that the technology has over run me! OLED, 4k, PS3,........it overwhelms me!
Thanks for your advice!

I need to make a decision soon.
Dan
Okay - let me try to help you as best I can...

OLED is nice, but it's not a must-have. I personally think an OLED is really nice for a TV where you are watching content and where blooming is irritating and inky-blacks are a must. For a computer monitor used for photography, I don't think it's worth paying for.

4K is definitely worth paying for, which is nice, because most monitors for photography will also be 4K by default.

Color space...

AdobeRGB - critical for printing since printing is done in CYMK and the cyans (and greens) are much wider (viewable) the more
...Show more →
I REALLY appreciate your patience with me on this!

I am getting the "jist" of specifications a whole lot better now!
My list narrows....
Again appreciate you!
Dan

Nov 13, 2026 at 02:13 PM
Danpbphoto
Offline
Details
p.2 #13Good Pro Monitor?
Dragonfire wrote:
Dan, I recently purchased a new Dell (https://www.amazon.com/dp/B0GLJ698SH?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_6) and popped in 64gb of ram and I use it on my 34" NEC with Spectraview curve with a display port cable and am able to switch back an forth with my old pc with the button on the monitor.

All I need until my optometrist does my cataracts.

I keep a 24" NEC with Spectraview in reserve because my wife likes the way the curve looks im the room.

Thanks Frank!
My NEC SpectraView LCD 3090WQXi has blessed me with great results for many years. The "X-Rite" calibration "mouse" went dead years ago when NEC's technology out advanced this version.
But the color comparison between "calibrated" and normal was very little in difference...

I guess now it is just making a decision and doing it.

When I originally "built" a computer I wanted, it was before the tariffs. It is now costing me 33% more!!!! I hesitated thinking I was making a decision too soon...WRONG! The wait cost me BIG TIME!

The media blames it on a reason that has not been mentioned...Many of the companies that moved operations "off shore" did so for their profit margin and their shareholders. It was not as if US Steel "wanted" to move from Pittsburgh to Japan or that is unionized labor force would be out of jobs...it was greed. Not sure the "why" for the workers unless there was a nice "buy out". involved. Nisson Steel made a killing here!

I watched Bethlehelm Steel in Baltimore build less ships and outsourced far more steel overseas yet made way more profit by doing that.
I saw many a cargo ship being built in those dry docks for 20 years...The mis management of the company did NOT come from overseas.
Thanks!
Dan

Nov 13, 2026 at 02:20 PM
Danpbphoto
Offline
Details
p.2 #14Good Pro Monitor?
I am spending way too much time finding a monitor..
would this meet your/my requirements?
ASUS ProArt PA32QCV 31.5" 6K HDR Monitor
Dan
Nov 14, 2026 at 12:55 PM
Danpbphoto
Offline
Details
p.2 #15Good Pro Monitor?
corposant wrote:
Danpbphoto wroteMY MAIN PROBLEM is that the technology has over run me! OLED, 4k, PS3,........it overwhelms me!
Thanks for your advice!

I need to make a decision soon.
Dan
Okay - let me try to help you as best I can...

OLED is nice, but it's not a must-have. I personally think an OLED is really nice for a TV where you are watching content and where blooming is irritating and inky-blacks are a must. For a computer monitor used for photography, I don't think it's worth paying for.

4K is definitely worth paying for, which is nice, because most monitors for photography will also be 4K by default.

Color space...

AdobeRGB - critical for printing since printing is done in CYMK and the cyans (and greens) are much wider (viewable) the more
...Show more →

ASUS ProArt PA32QCV 31.5" 6K HDR Monitor?

Nov 14, 2026 at 12:56 PM
jeffbuzz
Offline
Details
p.2 #16Good Pro Monitor?
Danpbphoto wrote:
ASUS ProArt PA32QCV 31.5" 6K HDR Monitor?



I'm reading this on a ProArt PA279CRV and voting yes. I think the P3 gamut is enough if you're not printing. Just be aware there might be times when some very, very rich greens are clipped compared to a 99% AdobeRGB display. I don't think that's a serious concern most of the time. You kind of need to choose resolution or color. If you want 6K, then you live with P3 color unless you spend $8K. If you want CMYK print color matching, you opt for 4K resolution.
Nov 14, 2026 at 01:22 PM


FM ForumsPhotography Gear & AccessoriesJoin Upload & Sell
  
 

You are not logged inLog inRegister