fredmiranda.com Login

Product/flat lay tripod

  
 
newyork
Offline
Details
p.2 #1Product/flat lay tripod
I’m liking my the ball head on a light stand with boom arm and the smaller light stands. I’ll be picking them all up when possible.

Also I’ll be looking for random objects and different colors for new backdrops. Pretty bored with my usual stuff and looking to get a little more education and grow.
Oct 18, 2026 at 05:14 PM
rico
Online
Details
p.2 #2Product/flat lay tripod
Another example of camera, ball head, light stand combo—no grip arm deployed here. The Matthews Low Boy junior roller is so heavy and stable that I didn't even bother to unfold the legs.

Oct 18, 2026 at 05:37 PM
CharleyL
Offline
Details
p.2 #3Product/flat lay tripod
Yes, there are many ways to solve photography problems, some easy to do, and some quite involved and expensive, if you don't already have the needed gear, but my issue with these movie Coming Attraction posters was the need to get them perfectly flat and at the exact camera distance so as to eliminate adjustments from one poster to the next. I have 6 C-Stands, about a dozen light stands, a half dozen camera tripods, two 6' camera stands, etc. in my studio with many brackets, adapters, and other Gaffer hardware that I could have used, but the idea of shooting straight down and with each poster (over 1,000 to shoot) at exactly the same distance from the camera and positioned exactly the same using the tape marks on the floor, let me shoot these at a rate of about 20 per minute, and almost no re-shoots were required.

My reference to "thinking outside the box" of the usual way of doing a photo shoot, in a way to solve a specific problem other than using our standard ways, is what I was trying to get across. Yes, the camera could have been on a floor standing tripod and still pointing down, but how many times would I have had to stop and reposition the tripod and camera after it got "bumped", while doing this for 1,000+ posters? We had the whole studio floor area to spread out stacks of these posters and keep them organized, as the owner had strongly requested. He had them all sequenced and he didn't want their order changed. He didn't want any new damage either. The floor provided lots of space for keeping these piles in order and no way of dropping them off the edge of a table that would have likely resulted in damage and likely getting them out-of-sequence. Some of these are quite valuable, real collector's items. How he managed to acquire all of these, some dated from back in the early 1920's and up is beyond me. Likely only 2, maybe 4 identical posters per theater that showed that movie and play dates were ever printed, and most were trashed when the movie changed each week. He's an old guy, but this collection spanned more years than his lifetime, so he didn't personally get them from each theater. Some were just black printed text on heavy white paper back in the early years, but the graphics and colors improved considerably over the years. Most were the one standard size, but some of the early ones were several sizes, and required different lens settings and tape positions. Fortunately, there weren't many of these. Now, many/most theaters don't even use printed posters. They have digital display screens out in front, showing the coming attractions that these printed posters once did.

There's more to setting up for a shoot like this than just pointing the camera and shooting poster after poster. Positioning and keeping them flat with the same even lighting was a very critical requirement for this. Most of what I've seen in your posts are the usual ways that we do photo shoots of products or small collections, but in this photo shoot we had to deal with over 1,000 posters and keep the results as near to identical as possible with each poster limited to just one shot or two, if at all possible. Yes, there were a few posters that didn't cooperate, but most were done in only one shot. He didn't want to see the floor or blue tape in the shots and he wanted the position of the printed area as close as possible to the same place from one poster to another. I didn't want to do any POST work on them, if I could possibly avoid it. Setting up for a product shoot where you change the product several times after getting the lights, camera, and other gear set up isn't at all the same as doing it repeatably for over 1,000 products, or POST will eat up all of your time and profits in your efforts to get them all acceptable. I did make a few adjustments in POST, but it was kept to a very minimum.

Charley
Oct 19, 2026 at 03:04 AM
newyork
Offline
Details
p.2 #4Product/flat lay tripod
That’s absolutely amazing. What an effort you had to put in. Thank God there was minimal POST.

CharleyL wrote:
Yes, there are many ways to solve photography problems, some easy to do, and some quite involved and expensive, if you don't already have the needed gear, but my issue with these movie Coming Attraction posters was the need to get them perfectly flat and at the exact camera distance so as to eliminate adjustments from one poster to the next. I have 6 C-Stands, about a dozen light stands, a half dozen camera tripods, two 6' camera stands, etc. in my studio with many brackets, adapters, and other Gaffer hardware that I could have used, but the idea of
...Show more →
Oct 21, 2026 at 04:52 AM
newyork
Offline
Details
p.2 #5Product/flat lay tripod
So I’m going to order 2 of those Manfrotto small light stands this weekend but I’m unsure what to order for the camera. Like the idea of the bigger light stand with boom arm and ball head. I have a few bigger Impact light stands that are heavy and. Boom arm. Idk what ball head and how it attaches.
Oct 24, 2026 at 01:47 PM
JBPhotog
Offline
Details
p.2 #6Product/flat lay tripod
For overhead flat lays a ball head is a PITA to get level on all the horizontal, vertical and rotational axis and many of them have a wee bit of creep when you lock them down. The preferred camera head is a geared head as it permits micro adjustments in all three obits.

Depending on camera weight most geared heads in the sub $400-$500 range will suffice, Leofoto GW-01, Benro GD3WH, Manfrotto 410 and others, stay away from the Leofoto G4 line as they do not lock down properly. I only have experience with the Leofoto GW-01, load capacity is the highest of this type at 17.6lbs. All except the Manfrotto accept Arca Swiss L-brackets or plates out of the box although Kirk Photo and some others make conversion kits to make them Arca compatible.

Other than picking up the Manfrotto 131D, for booming a camera you would need a high load stand with a junior receiver and boom arm $$$. In any case add sand bags which will help with stability or tripod and side arm or stand with boom.

newyork wrote:
So I’m going to order 2 of those Manfrotto small light stands this weekend but I’m unsure what to order for the camera. Like the idea of the bigger light stand with boom arm and ball head. I have a few bigger Impact light stands that are heavy and. Boom arm. Idk what ball head and how it attaches.


Oct 24, 2026 at 04:06 PM
newyork
Offline
Details
p.2 #7Product/flat lay tripod
Will I need any special adapters for putting that leofoto on a tripod. My oben tripod has a ball head but like you say, it creeps like crazy.
Oct 25, 2026 at 06:23 AM
jlafferty
Offline
Details
Oct 25, 2026 at 06:44 AM
JBPhotog
Offline
Details
p.2 #9Product/flat lay tripod
Take the ball head off your tripod. Most tripods have a 3/8"-16 threaded post for mounting heads of many types, this is where you will thread on the Leofoto head. Additionally, most quality tripods have grub screws that prevent the attached head from spinning under load, if yours has these, back them off to remove your ball head, attach the Leofoto head and tighten up the grub screws.

If you decided on the Manfrotto 131D side arm, then attach the Leofoto to the 3/8"-16 post on the side arm. If your tripod has a centre post that can rotate, that helps when positioning the legs and getting the camera directly over your subject. If it doesn't then a panning base attached to the tripod first can make things easier or you can set the legs where you want them and then thread the side arm on to the tripod and adjust the tightening collar for camera position.

With that Leofoto geared head, I have found if you slightly tighten the snap lock star knobs once you have the camera roughly positioned, then there is no play in the micro adjustment knobs.

newyork wrote:
Will I need any special adapters for putting that leofoto on a tripod. My oben tripod has a ball head but like you say, it creeps like crazy.


Oct 25, 2026 at 01:07 PM
 


Search in Used Dept. 

JBPhotog
Offline
Details
p.2 #10Product/flat lay tripod
Great choice on the tripod. Bought my first one 40+ years ago (161) and use it all the time with no issues. I also picked up a second used 161Mk2 a couple of years ago with the crank arm centre post. Simply brilliant sets of legs.

jlafferty wrote:
FWIW my wife has a career shooting overheads from our home and I rigged this together for the endeavor - not at all cheap but gets the job done for sure:

https://www.bhphotovideo.com/c/product/554071-REG/Manfrotto_161MK2B_161MK2B_Super_Pro_Tripod.html

https://www.bhphotovideo.com/c/product/848913-REG/FEISOL_PB_70_PB_70_Panning_Base.html

https://www.bhphotovideo.com/c/product/554331-REG/Manfrotto_131DB_131D_Lateral_Side_Arm.html


Oct 25, 2026 at 01:23 PM
rico
Online
Details
p.2 #11Product/flat lay tripod
newyork wrote:
Will I need any special adapters for putting that leofoto on a tripod.

To connect a baby pin (e.g. on a light stand) to a ball head, I use the following:



Link: MSG Ballhead Adapter

Alternatives exist, but this MSE item is well built.
Oct 25, 2026 at 05:43 PM
newyork
Offline
Details
p.2 #12Product/flat lay tripod
How about the Manfrotto One with 3 way tilt pan head and 2 short Manfrotto light stands?
Oct 27, 2026 at 06:40 AM
rico
Online
Details
p.2 #13Product/flat lay tripod
newyork wrote:
How about the Manfrotto One with 3 way tilt pan head ...

Not sure how this item addresses your original intent of <<Looking for a decent tripod with good lateral arm to hover a Z8 directly over product>>. The geared head looks fine (I use the Manfrotto 410), but the tripod looks ordinary and does not itself facilitatate overhead work. Even a geared head is only needed if overhead work is super exacting such as squaring a picture frame.
Oct 27, 2026 at 12:05 PM
JBPhotog
Offline
Details
p.2 #14Product/flat lay tripod
You already have a tripod so if you think you need something better "just" for flat lays then other options exist. Other than the Manfrotto 161Mk2 I would not look at other tripod choices.

A rig specifically for flat lays could be assembled out of the following for under $500.
Impact KEYGRIP Low Folder Roller Combo 2-Stage Stand (4') $149
https://www.bhphotovideo.com/c/product/1659790-REG/impact_lsp_lbch4_s_lowboy_folder_roller_with.html

Impact LS-BHA Baby Ball Head Adapter $29
https://www.bhphotovideo.com/c/product/1611035-REG/impact_ls_bha_ball_head_adapter.html

Manfrotto 131D Lateral Side Arm for Tripods (Black) $130
https://www.bhphotovideo.com/c/product/554331-REG/Manfrotto_131DB_131D_Lateral_Side_Arm.html

newyork wrote:
How about the Manfrotto One with 3 way tilt pan head and 2 short Manfrotto light stands?


Oct 27, 2026 at 12:17 PM
newyork
Offline
Details
p.2 #15Product/flat lay tripod
If I use my current tripod then all I need is the 2nd piece you linked and a sandbag which I own ?

JBPhotog wrote:
You already have a tripod so if you think you need something better "just" for flat lays then other options exist. Other than the Manfrotto 161Mk2 I would not look at other tripod choices.

A rig specifically for flat lays could be assembled out of the following for under $500.
Impact KEYGRIP Low Folder Roller Combo 2-Stage Stand (4') $149
https://www.bhphotovideo.com/c/product/1659790-REG/impact_lsp_lbch4_s_lowboy_folder_roller_with.html

Impact LS-BHA Baby Ball Head Adapter $29
https://www.bhphotovideo.com/c/product/1611035-REG/impact_ls_bha_ball_head_adapter.html

Manfrotto 131D Lateral Side Arm for Tripods (Black) $130
https://www.bhphotovideo.com/c/product/554331-REG/Manfrotto_131DB_131D_Lateral_Side_Arm.html

newyork wroteHow about the Manfrotto One with 3 way tilt pan head and 2 short Manfrotto light stands?

Oct 27, 2026 at 12:52 PM
newyork
Offline
Details
p.2 #16Product/flat lay tripod
Rico you’d say either what I said above or a light stand with Manfrotto 410 and light stand adapter you also linked with boom arm?
Oct 27, 2026 at 01:00 PM
newyork
Offline
Details
p.2 #17Product/flat lay tripod


newyork wrote:
Rico you’d say either what I said above or a light stand with Manfrotto 410 and light stand adapter you also linked with boom arm?



I’d like to be able to shoot flat lay overhead as well as from other angles .
Oct 27, 2026 at 01:07 PM
rico
Online
Details
p.2 #18Product/flat lay tripod
Except for multiframe compositing (a specialist requirement), you'll be nicely served by the first rig I depicted: junior roller light stand, long grip arm, the adapter, and a ball head. No use for geared head. You can cheap out on the light stand with a non-roller baby but keep it steel.
Oct 27, 2026 at 02:58 PM


FM ForumsLighting & Studio TechniquesJoin Upload & Sell
  
 

You are not logged inLog inRegister