fredmiranda.com Login

Valoi Easy35 Film Scanning

  
 
Surfnsun
Offline
Details
p.4 #1Valoi Easy35 Film Scanning
That’s the thing I’m looking at too.

Sony’s lens option is $1000 and the other option I see used is Laowa’s 90mm f/2.8 2x Ultra Macro APO Lens for Sony E. That goes for ~$500. I’m leaning towards the Laowa.

What other options are there available in M mount or E mount? Just wondering…

Uofoducks15 wrote:
1bwana1 wrote
James Markus wrote
1bwana1 wroteWhat are the specifications of the files those scanners output.

Tha Valoi gives you RAW files, at full 14bit depth, more DR than film has, whatever mpx the camera has. Wonderful to edit those files. Plus, you get a macro lens for many other uses. Hard to beat all those advantages.
I didn't find file formats saved info with the default software, and the bundled scanner specific Plustex version of Silverfast is probably been trimmed for the bundle. I have the same software version for another scanner, but saving in raw has been problematic since Lasersoft has their own proprietory raw format. There were three levels of the software for my scanner - I got the SE + of silverfast v9. It's really capable software, but a bit deep to learn. The reason I mention this is there are hardware specs, and hardware specs using Silverfast floating around the web on both scanners. Silverfast specs make the scanner appear more capable than the manufacturer claims,

Taken from the web site

135i ai

Approx. 360 seconds for maximum scanning area color at 3600 dpi (IR enabled) (6 MINUTES PER FRAME!))

Approx. 25 minutes for maximum scanning area at maximum resolution: 7200dpi (IR enabled) PER FRAME

Dynamic Range 3.4

9000i ai

3,600 dpi: Approx. 20 sec & 40 sec with IR scanning (This is almost the same as the LS-4000 & LS-5000 at 4000dpi)

7,200 dpi: Approx. 40 sec & 120 sec with IR scanning

Dynamic Range 3.6 (with Silverfast the DR = 4.01)

I'm not slamming these scanners. You just need to be aware that a 36 exposure roll will take between 3.6 hours at 3600dpi IR enabled and 15 hours on the 135i ai at 7200dpi to scan. That is a long slog imo. The 9000i would be considerably less.

I've been using Silverfast since the late 1990s on a Nikon LS-1000. It increased the image quality immensely, but the scanner is limited by hardware to 8bit color. Still makes great 5400dpi scans with great color, when the oem software could only do crappy color at 2700dpi. The 5400dpi scan only took 60 seconds back then, and it drove me crazy.
Reading that I don't know why anyone would go that route. Valoi camera scanning takes about 1/60 seconds. I can scan a roll of 36 frame film in under 5 minutes. It gives you a RAW file almost any editor can work with. It provides 12 -15 stops of DR. You get the full resolution of the camera you use. All in an inexpensive, compact form factor. It can scan a variety of film formats.

Valoi seems like an easy choice for most of us.
It’s just a slightly more expensive option given I don’t have a macro lens, but of course then you have a macro lens to use long term for your photography.

It’s probably the better option over a plustek

Sep 12, 2026 at 09:24 AM
1bwana1
Offline
Details
p.4 #2Valoi Easy35 Film Scanning
Surfnsun wrote:
That’s the thing I’m looking at too.

Sony’s lens option is $1000 and the other option I see used is Laowa’s 90mm f/2.8 2x Ultra Macro APO Lens for Sony E. That goes for ~$500. I’m leaning towards the Laowa.

What other options are there available in M mount or E mount? Just wondering…

Uofoducks15 wrote
1bwana1 wrote
James Markus wrote
1bwana1 wroteWhat are the specifications of the files those scanners output.

Tha Valoi gives you RAW files, at full 14bit depth, more DR than film has, whatever mpx the camera has. Wonderful to edit those files. Plus, you get a macro lens for many other uses. Hard to beat all those advantages.
I didn't find file formats saved info with the default software, and the bundled scanner specific Plustex version of Silverfast is probably been trimmed for the bundle. I have the same software version for another scanner, but saving in raw has been problematic since Lasersoft has their own proprietory raw format. There were three levels of the software for my scanner - I got the SE + of silverfast v9. It's really capable software, but a bit deep to learn. The reason I mention this is there are hardware specs, and hardware specs using Silverfast floating around the web on both scanners. Silverfast specs make the scanner appear more capable than the manufacturer claims,

Taken from the web site

135i ai

Approx. 360 seconds for maximum scanning area color at 3600 dpi (IR enabled) (6 MINUTES PER FRAME!))

Approx. 25 minutes for maximum scanning area at maximum resolution: 7200dpi (IR enabled) PER FRAME

Dynamic Range 3.4

9000i ai

3,600 dpi: Approx. 20 sec & 40 sec with IR scanning (This is almost the same as the LS-4000 & LS-5000 at 4000dpi)

7,200 dpi: Approx. 40 sec & 120 sec with IR scanning

Dynamic Range 3.6 (with Silverfast the DR = 4.01)

I'm not slamming these scanners. You just need to be aware that a 36 exposure roll will take between 3.6 hours at 3600dpi IR enabled and 15 hours on the 135i ai at 7200dpi to scan. That is a long slog imo. The 9000i would be considerably less.

I've been using Silverfast since the late 1990s on a Nikon LS-1000. It increased the image quality immensely, but the scanner is limited by hardware to 8bit color. Still makes great 5400dpi scans with great color, when the oem software could only do crappy color at 2700dpi. The 5400dpi scan only took 60 seconds back then, and it drove me crazy.
Reading that I don't know why anyone would go that route. Valoi camera scanning takes about 1/60 seconds. I can scan a roll of 36 frame film in under 5 minutes. It gives you a RAW file almost any editor can work with. It provides 12 -15 stops of DR. You get the full resolution of the camera you use. All in an inexpensive, compact form factor. It can scan a variety of film formats.

Valoi seems like an easy choice for most of us.
It’s just a slightly more expensive option given I don’t have a macro lens, but of course then you have a macro lens to use long term for your photography.

It’s probably the better option over a plustek


Both Sigma and Tamron make excellent Macro lenses for the E-Mount.
Sep 12, 2026 at 09:47 AM
Uofoducks15
Offline
Details
p.4 #3Valoi Easy35 Film Scanning
I was looking at the Sigma 105 for L mount. I’d be using an SLS-2 body
Sep 12, 2026 at 10:04 AM
1bwana1
Offline
Details
p.4 #4Valoi Easy35 Film Scanning
Uofoducks15 wrote:
I was looking at the Sigma 105 for L mount. I’d be using an SLS-2 body


That is exactly the lens I use on my SL3 to scan with the Valoi. Works great.
Sep 12, 2026 at 10:28 AM
henk.sijgers
Offline
Details
p.4 #5Valoi Easy35 Film Scanning
carstenw wrote:
henk.sijgers wroteAt some point I need to divert some hobby money into an Easy120 purchase: this is so much easier than using a flatbed and Silverfast (I can't even get myself to try that any more) or a copy stand (I lack the ability to set this up well enough to get quality results).
I have been looking at the Easy120, but I am a little worried about the bad reviews some Valoi products get. Can you talk a bit about why this is a good system, and what limitations it might have?


I haven't looked at any Valoi reviews lately, but I can see how the v1 would get some less than stellar ones, just because the 3D printing doesn't necessarily yield the most dimensionally-stable Lightbox/film feed. I have a dedicated scanning lens (Sony FE 90mm f2.8 G Macro OSS) that I leave in manual focus mode hooked up to the Valoi helical focus unit, two of the Valoi spacer tubes, and (now) the v2 Lightbox (minor note: v1 needed a finicky adapter to connect the Lightbox and the spacer tubes; v2 has 62mm threads and simply screws directly onto the spacer tubes). It's a compact setup that takes up very little space so I don't disassemble it after scanning: I just put it away as one piece..

When it's time to scan all I have to do is grab the pre-assembled lens/helical/tube/Valoi assembly, swap the camera's lens, set ISO, etc. feed in the start of the roll of negatives, tweak focus, and it's time to scan. It's only a few minutes work to set up, and I can scan a full roll in maybe five minutes.

Compared to setting up my old Canon flatbed (which now sits in a box in the garage because I don't have room for it in my office), fiddling with negative holders, and fighting with Silverfast there's no comparison: using the Valoi is so much faster and so much less annoying. We moved five years ago and I haven't actually looked at the Canon flatbed since packing it up at our old place. I do think I'll quickly get the v2 film duster: working with the v1 I felt like it really helped reduce dust on the film (in combination with a blower just before feeding).

I've never used Valoi's Easy120 unit myself, and I can see how film flatness might be a bigger problem with the larger negative, but I also wasn't happy with the overall scanning process and resulting quality of my previous 120 film scans to the point where I stopped using my 120 cameras (Yashica 124G and 635, Voigtlander Perkeo I, Bessa I, Moskva 5) because I wasn't willing any more to try to scan them myself or pay a film lab for scans. So I'm leaning towards buying an Easy120 at some point and giving 120 film/cameras another go.

Shorter version: for me the Valoi Easy35 is compact, convenient, quick to use, and the quality has been good enough; at some point I hope to give the Valoi Easy120 a try.

Sep 12, 2026 at 10:45 AM
misteracng
Offline
Details
p.4 #6Valoi Easy35 Film Scanning


Uofoducks15 wrote:
Curious to anyone who has experience with both. How would the Valoi v2 or negative supply set ups with an SLS-2 compare to just getting something like the plustek 9000?

I only have m lenses for my SLS-2 so I’d need to purchase the setup and a macro lens to use it for scanning versus the plustek which would scan the film on its own.

Currently I have no medium or large format film cameras so only need to worry about scanning 35mm film from my MP

For just 35mm alone the valoi is much more compact and simpler, I use a negative supply setup but mostly for medium format. I also use the 105mm sigma macro for my stand setup. However I would say if you are only using the valoi setup a shorter focal length would be better. It would be much shorter and less tubes needed. I would suggest buying the valoi helicoid it makes getting precise framing much easier.
Sep 12, 2026 at 12:19 PM
carstenw
Offline
Details
p.4 #7Valoi Easy35 Film Scanning
henk.sijgers wrote:
I haven't looked at any Valoi reviews lately, but I can see how the v1 would get some less than stellar ones, just because the 3D printing doesn't necessarily yield the most dimensionally-stable Lightbox/film feed. I have a dedicated scanning lens (Sony FE 90mm f2.8 G Macro OSS) that I leave in manual focus mode hooked up to the Valoi helical focus unit, two of the Valoi spacer tubes, and (now) the v2 Lightbox (minor note: v1 needed a finicky adapter to connect the Lightbox and the spacer tubes; v2 has 62mm threads and simply screws directly onto the spacer
...Show more →

Right, that is about where I am at. I had an Epson V750 but I found that dust was such a huge problem that I didn't even get to the lack of film flatness, and it just stood there. I also hated the software, it is from the 80s or something, and was just quirky as hell.

The Easy120 looks good, if you get the higher end kit with the lightbox and the film advance kit.

Edited on Sep 25, 2026 at 04:58 AM · View previous versions
Sep 12, 2026 at 02:16 PM
Uofoducks15
Offline
Details
p.4 #8Valoi Easy35 Film Scanning


misteracng wrote:
Uofoducks15 wroteCurious to anyone who has experience with both. How would the Valoi v2 or negative supply set ups with an SLS-2 compare to just getting something like the plustek 9000?

I only have m lenses for my SLS-2 so I’d need to purchase the setup and a macro lens to use it for scanning versus the plustek which would scan the film on its own.

Currently I have no medium or large format film cameras so only need to worry about scanning 35mm film from my MP
For just 35mm alone the valoi is much more compact and simpler, I use a negative supply setup but mostly for medium format. I also use the 105mm sigma macro for my stand setup. However I would say if you are only using the valoi setup a shorter focal length would be better. It would be much shorter and less tubes needed. I would suggest buying the valoi helicoid it makes getting precise framing much easier.


Appreciate the info, between this and reading the valoi site I opted for a used Sigma 70mm macro from MAP camera for about ~350. Shipped

Between that and the easy35 it will be about the same price as a plustek and hopefully will make for a quicker and easier setup.
Sep 12, 2026 at 04:07 PM
old_hikingman
Offline
Details
p.4 #9Valoi Easy35 Film Scanning
Pictured below has been my 35mm & 6cm square scanning rig with Nikon Z7ii & Tamron Z 90mm Macro. It is useful for me to have this copy stand setup because I have many 6cm mounted slides that are warped so I have a heavy steel machined plate with square cutout that holds them down flat.

The alignment I have worked on endlessly and though likely not perfect, so far shooting at f11 it's been fine.

If I were to get the Easy35 setup, can it just "hang" off the macro lens and I continue to use Nikon tether to take my pictures and direct them to folders?

I see pictures of the camera sitting on a surface and not on a stand. I want to make sure I can use it from a stand. It wouldn't seem to matter, but maybe there is a structural/attachment issue that doesn't allow it. I imagine the Easy35 has a better light source than I'm using too.

Dave




Sep 16, 2026 at 11:15 AM
1bwana1
Offline
Details
p.4 #10Valoi Easy35 Film Scanning
old_hikingman wrote:
Pictured below has been my 35mm & 6cm square scanning rig with Nikon Z7ii & Tamron Z 90mm Macro. It is useful for me to have this copy stand setup because I have many 6cm mounted slides that are warped so I have a heavy steel machined plate with square cutout that holds them down flat.

The alignment I have worked on endlessly and though likely not perfect, so far shooting at f11 it's been fine.

If I were to get the Easy35 setup, can it just "hang" off the macro lens and I continue to use Nikon tether to take my
...Show more →

I don't see any reason you couldn't continue to use your stand with the Valoi. I just can't imagine why you would want to. The tight machining of the Valoi ensures better alignment and more even lighting than you have been getting in a smaller, more convenient, easy to use form factor.
Sep 16, 2026 at 11:41 AM
 


Search in Used Dept. 

henk.sijgers
Offline
Details
p.4 #11Valoi Easy35 Film Scanning
old_hikingman wrote:
Pictured below has been my 35mm & 6cm square scanning rig with Nikon Z7ii & Tamron Z 90mm Macro. It is useful for me to have this copy stand setup because I have many 6cm mounted slides that are warped so I have a heavy steel machined plate with square cutout that holds them down flat.

The alignment I have worked on endlessly and though likely not perfect, so far shooting at f11 it's been fine.

If I were to get the Easy35 setup, can it just "hang" off the macro lens and I continue to use Nikon tether to take my
...Show more →

I think you should be able to replace the stand (and the complexities of alignment, which is why I gave up on stands) with the camera and Easy35 setup placed horizontally on a table and still using Nikon tether to direct your tethered captures to folders The film holder you use with the light box then takes over responsibility for film flattening (value makes on specifically for slides). Most importantly, the film holder fits into a compatible slot in the light box unit.

Iif your goal is to leverage your steel machined plate I don't tink that it would be compatible with Easy35 abecause of the slide-in film frames with masks (e.g., slide masked holder, full frame masked holder, half frame masked holder, 110 masked holder, etc.). Basically, you end up with a single connected assembly of camera, lens, extension tubes, and the Easy35 lightbox with its film holder slot. This design makes laying the setup horizontally simple, but using a plate can't be feasibly done with an Easy35 (as far as I can tell).

Valoi does sell a "360" solution that seems more aligned to using a copy stand but I don't really know much about it.
Sep 16, 2026 at 11:41 AM
old_hikingman
Offline
Details
p.4 #12Valoi Easy35 Film Scanning
1bwana1 wrote:
I don't see any reason you couldn't continue to use your stand with the Valoi. I just can't imagine why you would want to. The tight machining of the Valoi ensures better alignment and more even lighting than you have been getting in a smaller, more convenient, easy to use form factor.


Thank you for commenting!

I looked into the Easy 120 variants here and it's more $$ than I wish to spend right now, so leaving the camera attached to the stand as pictured is just convenient so I can continue scanning 120 my current somewhat crude way. Furthermore, I have the luxury of just keeping this camera and lens "permanently" as a copy setup. They don't need being used for other things.

I'm gonna buy the Easy35 rig and just try attaching it to the camera/lens as is and providing the space necessary below for the easy35 to work.

I was not intending for this rig to function with the big plate holding down warped slides. Another reason I still want the stand. Of course, if I find horizontal positioning preferable, camera is attached to stand via an arca-swiss quick release, so easy peasy

Dave
Sep 16, 2026 at 12:22 PM
old_hikingman
Offline
Details
p.4 #13Valoi Easy35 Film Scanning
Oh boy, having just acquired a friend's massive 120 film collection of the redwoods, I do have lots of 120 to go through!

I see several references on this thread regarding the Easy120 setup without any negative feedback. Can any of you confirm you're still happy?

The 35mm slide holder is pricey I hope it works well. I'm changing my mind and will go for the 120 system instead of the 35.

Dave
Sep 16, 2026 at 01:00 PM
geekcop
Offline
Details
p.4 #14Valoi Easy35 Film Scanning
I sent my easy120 back immediately after purchase. It wouldn't keep film flat. Specifically the first image or the last due to the way the film holder works. I shoot 6x9 which, when cut to fit into sleeves (2 images per strip) were unscannable. The negatives also slipped out of the tracks of the holder. I've used and owned both easy35's and they work loads better than the easy120. I'll never buy one again.
Sep 16, 2026 at 01:08 PM
old_hikingman
Offline
Details
p.4 #15Valoi Easy35 Film Scanning
Ouch, bum to hear! However, the tons of stuff I need to work with are mostly all sleeved 10 frame 6x7 strips - PLUS what I'll take with the Linhof will also be intact (not cut down).

When you say "unscanable" do you mean even very flat negs just can't remain flat enough? Stopping down lens doesn't cover this, etc.?
Sep 16, 2026 at 01:31 PM
geekcop
Offline
Details
p.4 #16Valoi Easy35 Film Scanning
The negatives at the end of the strips sagged too much. No amount of aperture adjustment would fix them at least on my easy120 unit. Full roll works, but the first and last frames don't scan flat.

Edited on Sep 18, 2026 at 04:44 AM · View previous versions
Sep 16, 2026 at 06:43 PM
old_hikingman
Offline
Details
p.4 #17Valoi Easy35 Film Scanning
When I was using my Epson V750 to scan, I often cut a piece of light weight photo paper to the size of 2 6x6cm images I was scanning, and propped up the unsupported edge of last frame with it. Just stiff enough to support perfectly. I taped these pieces to ends of curley film quite often to make a strip stay flatter.

I would think that technique could work here too.
Sep 16, 2026 at 07:39 PM
citizenkang
Offline
Details
p.4 #18Valoi Easy35 Film Scanning
rji2goleez wrote:
I had and loved the Valoi 35 system. However, I was also looking to scan medium format film. Valoi came out with a separate system which was much more expensive. So, I turned to the Holo Advance by Black Scale Labs. It is siimilar to the Valoi but will scan both 35mm and medium format film. It uses a Cinestil light panel which I like better than the Valoi light source. The assembly and operation is very similar to Valoi.

https://www.etsy.com/listing/1786084702/holo-advance-film-scanner-for-35mm?ref=yr_purchases


this is good to know thanks for sharing
Sep 22, 2026 at 12:18 PM
citizenkang
Offline
Details
p.4 #19Valoi Easy35 Film Scanning
I have the easy version holders and they work great. I'm interested in trying other holders that include the full border/sprockets, but all the options I found are a little pricey.
Sep 22, 2026 at 12:20 PM
old_hikingman
Offline
Details
p.4 #20Valoi Easy35 Film Scanning
VALOI 360 PROFESSIONAL SCANNING KIT 35 & 120

With the acquisition of a friends extensive redwoods collection, I knew I needed a more fixed and steady holder arrangement than all my mickey-mouse fabricated "holders" which I have to keep adjusting for almost every image (an image of one of those was posted earlier).

Because both 35mm & 120 film + slides are involved, the above mentioned kit. seemed ideal to me. It includes the film advancer, an adjustable light source, 2 film holders (35 & 6x7), 3 masks (6x4.5, 6x6, and 6x7), an anti-static film cleaning brush & mirror for overall alignment of camera to film plane.

Setup was fairly easy and this morning I loaded one of my friend's mountain scenes taken with the Linhof Technika 6x9 camera and pushed the film into the 6x7 holder. Mindful of @geekcop's issues with flatness, I found that so far I am quite satisfied with the film flatness, even on the starting unsupported frame. YMWV!

My testing so far finds f8 & f11 a draw sharpness wise, so I'm going with f11

The 35mm slide holder is not part of the kit but I have it coming.

Below a couple photos of the rig at 12,800 ISO and then a scan of one of my friend's images. The results to my macular degenerated eyes are all I could ask for

Dave





Nikon Z7ii and Tamron Z 90mm macro lens







Film advancer unit on top of light source







Unknown location - taken with Linhof Super Technika 6x9 camera

Sep 22, 2026 at 12:58 PM


FM ForumsFilm Is Not Dead ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister