fredmiranda.com Login

Voigtlander 35mm f/1.5 Nokton Review

  
 
Fred Miranda
Offline
Admin
Upload & Sell: On
Details
p.12 #1Voigtlander 35mm f/1.5 Nokton Review
rramesh wrote:
Also do note that the LH-4N hood has 3 tiny screws, if when removed, allows the separation of the flared hood from the base which still can be used to cover the chrome rim.


---------------------------------------------

thrice wrote:
rramesh wroteAlso do note that the LH-4N hood has 3 tiny screws, if when removed, allows the separation of the flared hood from the base which still can be used to cover the chrome rim.
This is interesting... No pressure, but do you have a pic of that?


I didn't know this was possible and just tried it out.

The Voigtlander 35/1.5 Nokton with just the base of the LH-4N hood looks like this:














Dec 12, 2022 at 08:22 PM
rramesh
Offline
Details
p.12 #2Voigtlander 35mm f/1.5 Nokton Review


Fred Miranda wrote:
rramesh wroteAlso do note that the LH-4N hood has 3 tiny screws, if when removed, allows the separation of the flared hood from the base which still can be used to cover the chrome rim.
---------------------------------------------

thrice wrote
rramesh wroteAlso do note that the LH-4N hood has 3 tiny screws, if when removed, allows the separation of the flared hood from the base which still can be used to cover the chrome rim.
This is interesting... No pressure, but do you have a pic of that?
I didn't know this was possible and just tried it out.

The Voigtlander 35/1.5 Nokton with just the base of the LH-4N hood looks like this:


Now add a 39-43 step up ring to hide the screws and screw holes
Dec 12, 2022 at 08:41 PM
Fred Miranda
Offline
Admin
Upload & Sell: On
Details
p.12 #3Voigtlander 35mm f/1.5 Nokton Review
thrice wrote:
My silver painted lens arrived. Nice and dense feeling. Good looking lens, great ergonomics. Mine has a paint imperfection on the aperture ring and the paint job on the focusing tab is honestly worse than I couldn't have done in my garage.

If it ever stops raining I'll compare it to the distagon. Excuse the rushed smartphone pics of the lenses.

https://i.ibb.co/GHwYnVV/PXL-20221213-014634253.jpg
https://i.ibb.co/0jQdqQN/PXL-20221213-014644069.jpg
https://i.ibb.co/Hz7rqkN/PXL-20221213-014806239.jpg
https://i.ibb.co/RSdSsWn/PXL-20221213-014836233.jpg


Very charming in silver on the silver M.
It's so small next to the ZM. Would yo say half the length?
Dec 12, 2022 at 08:42 PM
Fred Miranda
Offline
Admin
Upload & Sell: On
Details
p.12 #4Voigtlander 35mm f/1.5 Nokton Review
rramesh wrote:
Fred Miranda wrote
rramesh wroteAlso do note that the LH-4N hood has 3 tiny screws, if when removed, allows the separation of the flared hood from the base which still can be used to cover the chrome rim.
---------------------------------------------

thrice wrote
rramesh wroteAlso do note that the LH-4N hood has 3 tiny screws, if when removed, allows the separation of the flared hood from the base which still can be used to cover the chrome rim.
This is interesting... No pressure, but do you have a pic of that?
I didn't know this was possible and just tried it out.

The Voigtlander 35/1.5 Nokton with just the base of the LH-4N hood looks like this:
Now add a 39-43 step up ring to hide the screws and screw holes


Nice! I will forward this idea to Cosina. They should offer bayonet 'rings' for all their lenses.
Dec 12, 2022 at 08:44 PM
lensfan
Offline
Details
p.12 #5Voigtlander 35mm f/1.5 Nokton Review
Have you seen reflections from the steel rim in real photography?
Dec 12, 2022 at 08:45 PM
thrice
Offline
Details
p.12 #6Voigtlander 35mm f/1.5 Nokton Review
Yep half the length which is wild but Zeiss did say the distagon was an uncompromising design.

Voigtlander should offer twist on bayonet caps for when their lenses aren't being used. Would make for an even smaller package in the bag and cover the silver filter ring but I guess the lens is still a little ugly when you take off the cap then.

Fred Miranda wrote:
thrice wroteMy silver painted lens arrived. Nice and dense feeling. Good looking lens, great ergonomics. Mine has a paint imperfection on the aperture ring and the paint job on the focusing tab is honestly worse than I couldn't have done in my garage.

If it ever stops raining I'll compare it to the distagon. Excuse the rushed smartphone pics of the lenses.

https://i.ibb.co/GHwYnVV/PXL-20221213-014634253.jpg
https://i.ibb.co/0jQdqQN/PXL-20221213-014644069.jpg
https://i.ibb.co/Hz7rqkN/PXL-20221213-014806239.jpg
https://i.ibb.co/RSdSsWn/PXL-20221213-014836233.jpg
Very charming in silver on the silver M.
It's so small next to the ZM. Would yo say half the length?

Dec 12, 2022 at 08:47 PM
Fred Miranda
Offline
Admin
Upload & Sell: On
Details
p.12 #7Voigtlander 35mm f/1.5 Nokton Review
lensfan wrote:
Have you seen reflections from the steel rim in real photography?


Unfortunately 'ring flare' happens with lenses with the chrome rim.
Dec 12, 2022 at 08:51 PM
pinewood
Offline
Details
p.12 #8Voigtlander 35mm f/1.5 Nokton Review
Now we're getting somewhere. This chrome ring issue has been one of the reasons I didn't care to buy Voigtlander lenses.
Dec 12, 2022 at 09:01 PM
rscheffler
Offline
Details
p.12 #9Voigtlander 35mm f/1.5 Nokton Review
lensfan wrote:
Have you seen reflections from the steel rim in real photography?


Yes, for those rare times when it was necessary to shoot through glass. Such as perhaps the window of a train or bus, etc. Would end up with a bright circular reflection in the image. Size and brightness depended on how close to the glass. This is particularly what annoyed me many years ago about the chrome rings on the ZM and now also VM lenses. A black step-ring is a quick fix, or a filter, but I don't normally use clear 'protective' filters.
Dec 12, 2022 at 09:55 PM
Chris Cheng
Offline
Details
p.12 #10Voigtlander 35mm f/1.5 Nokton Review
Finally got mine (type I). Incredibly light and small. The paint looks very nice but it seems to attract finger prints. The rangefinder coupling is perfect.

Aperture ring has a more muted click feel compared to previous voigtlander lenses like 50mm f1.5, 28mm f2, and 35mm f2.

Focus is smooth but there is some damping to it. I'd prefer the damping to be lighter so I can focus faster
Dec 13, 2022 at 01:12 AM
 


Search in Used Dept. 

Sonnar
Offline
Details
p.12 #11Voigtlander 35mm f/1.5 Nokton Review
Damn they should have launched this lens a few years earlier, before the 35/1.2 Nokton III and the 35/2 Ultron Classic. Now I have these two already (plus the Ultron VM 35/1.7)!
But from the pictures here I think it pretty much performs like the former mentioned, right?
Dec 13, 2022 at 02:58 AM
Chris Cheng
Offline
Details
p.12 #12Voigtlander 35mm f/1.5 Nokton Review
Did some quick shots after I received the lens, I didn't do any controlled test, but I got the impression wide open at f1.5, this lens is not as sharp as 35mm f2 Ultron at f2 or Sony 35mm 1.4GM at 1.4
Dec 13, 2022 at 05:29 AM
phinix
Offline
Details
p.12 #13Voigtlander 35mm f/1.5 Nokton Review
I noticed a lot of people here complain about that chrome ring on VM lens.
Is it a problem? I have to be honest, I did not like it initially, but now, when I tried out VM lens for a first time (40/1.2) I have to say it adds a character to the lens. I actually prefer it compared to E versions.

Do you guys don't like it for aesthetic reasons, or practical, like does it always produce flares or something like that?
Dec 13, 2022 at 07:56 AM
tri_fin
Offline
Details
p.12 #14Voigtlander 35mm f/1.5 Nokton Review
phinix wrote:
I noticed a lot of people here complain about that chrome ring on VM lens.
Is it a problem? I have to be honest, I did not like it initially, but now, when I tried out VM lens for a first time (40/1.2) I have to say it adds a character to the lens. I actually prefer it compared to E versions.

Do you guys don't like it for aesthetic reasons, or practical, like does it always produce flares or something like that?


The silver ring does cause unnecessary flare. I have found it happen when light is reflected up from below the lens - sunlight reflected off a puddle. When it happens it is really annoying and hard to deal with. So I have to use a filter, which id prefer not, to cover the silver thread - a bayonet mounted hood did not stop it. All of my lenses happen to have a silver filter thread and it sucks...

My understanding is that the silver ring does not show wear as much as a black ring would when using a metal bayonet hood. The current Nokton 50/1 has a black ring but the bayonet part on the hood is plastic to stop unsightly wear...
Dec 13, 2022 at 08:37 AM
tri_fin
Offline
Details
p.12 #15Voigtlander 35mm f/1.5 Nokton Review
Fred Miranda wrote:
rramesh wrote
Fred Miranda wrote
rramesh wroteAlso do note that the LH-4N hood has 3 tiny screws, if when removed, allows the separation of the flared hood from the base which still can be used to cover the chrome rim.
---------------------------------------------

thrice wrote
rramesh wroteAlso do note that the LH-4N hood has 3 tiny screws, if when removed, allows the separation of the flared hood from the base which still can be used to cover the chrome rim.
This is interesting... No pressure, but do you have a pic of that?
I didn't know this was possible and just tried it out.

The Voigtlander 35/1.5 Nokton with just the base of the LH-4N hood looks like this:
Now add a 39-43 step up ring to hide the screws and screw holes
Nice! I will forward this idea to Cosina. They should offer bayonet 'rings' for all their lenses.


Leica offer a ring to cover the thread on the Summarit 35mm & 50mm / 2.4 lenses when not using the hood.....

Dec 13, 2022 at 08:52 AM
giustiniani
Offline
Details
p.12 #16Voigtlander 35mm f/1.5 Nokton Review
I don't have the lens but a step up ring would probably solve this. It's much more discret than a hood and adds some banging protection to boot.

phinix wrote:
I noticed a lot of people here complain about that chrome ring on VM lens.
Is it a problem? I have to be honest, I did not like it initially, but now, when I tried out VM lens for a first time (40/1.2) I have to say it adds a character to the lens. I actually prefer it compared to E versions.

Do you guys don't like it for aesthetic reasons, or practical, like does it always produce flares or something like that?

Dec 13, 2022 at 10:27 AM
Fred Miranda
Offline
Admin
Upload & Sell: On
Details
p.12 #17Voigtlander 35mm f/1.5 Nokton Review
rramesh wrote:
Fred Miranda wrote
rramesh wroteAlso do note that the LH-4N hood has 3 tiny screws, if when removed, allows the separation of the flared hood from the base which still can be used to cover the chrome rim.
---------------------------------------------

thrice wrote
rramesh wroteAlso do note that the LH-4N hood has 3 tiny screws, if when removed, allows the separation of the flared hood from the base which still can be used to cover the chrome rim.
This is interesting... No pressure, but do you have a pic of that?
I didn't know this was possible and just tried it out.

The Voigtlander 35/1.5 Nokton with just the base of the LH-4N hood looks like this:
Now add a 39-43 step up ring to hide the screws and screw holes


Are you sure a 39-43mm step-up ring would hide them? If you have a picture showing this, can you post it for us?
Dec 13, 2022 at 10:48 AM
Desmolicious
Offline
Details
p.12 #18Voigtlander 35mm f/1.5 Nokton Review
Fred Miranda wrote:
rramesh wrote
Fred Miranda wrote
rramesh wroteAlso do note that the LH-4N hood has 3 tiny screws, if when removed, allows the separation of the flared hood from the base which still can be used to cover the chrome rim.
---------------------------------------------

thrice wrote
rramesh wroteAlso do note that the LH-4N hood has 3 tiny screws, if when removed, allows the separation of the flared hood from the base which still can be used to cover the chrome rim.
This is interesting... No pressure, but do you have a pic of that?
I didn't know this was possible and just tried it out.

The Voigtlander 35/1.5 Nokton with just the base of the LH-4N hood looks like this:
Now add a 39-43 step up ring to hide the screws and screw holes
Are you sure a 39-43mm step-up ring would hide them? If you have a picture showing this, can you post it for us?


But what will hide that step up ring?
Dec 13, 2022 at 10:53 AM
Desmolicious
Offline
Details
p.12 #19Voigtlander 35mm f/1.5 Nokton Review
phinix wrote:
Do you guys don't like it for aesthetic reasons, or practical, like does it always produce flares or something like that?


Both.
Dec 13, 2022 at 10:54 AM
Fred Miranda
Offline
Admin
Upload & Sell: On
Details
p.12 #20Voigtlander 35mm f/1.5 Nokton Review
Desmolicious wrote:
Fred Miranda wrote
rramesh wrote
Fred Miranda wrote
rramesh wroteAlso do note that the LH-4N hood has 3 tiny screws, if when removed, allows the separation of the flared hood from the base which still can be used to cover the chrome rim.
---------------------------------------------

thrice wrote
rramesh wroteAlso do note that the LH-4N hood has 3 tiny screws, if when removed, allows the separation of the flared hood from the base which still can be used to cover the chrome rim.
This is interesting... No pressure, but do you have a pic of that?
I didn't know this was possible and just tried it out.

The Voigtlander 35/1.5 Nokton with just the base of the LH-4N hood looks like this:
Now add a 39-43 step up ring to hide the screws and screw holes
Are you sure a 39-43mm step-up ring would hide them? If you have a picture showing this, can you post it for us?
But what will hide that step up ring?


I am not sure, that's why it would be great to see picture. By looking at it, I don't think a step up ring would hide the holes in front of the hood base as shown in this picture:




Dec 13, 2022 at 11:29 AM


FM ForumsSony ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister