fredmiranda.com Login

Voigtlander 50mm f/1 Nokton Review

  
 
BrandonSi
Offline
Details
p.32 #1Voigtlander 50mm f/1 Nokton Review
Just for reference, the $7.99 58mm screw on (non-vented) hood works great for the Nokton 50 1.1. Blocks maybe 10% more of the viewfinder, but looks much better, IMO.

https://www.amazon.com/dp/B07QWP1H22
Nov 10, 2023 at 06:30 PM
serhan_
Offline
Details
p.32 #2Voigtlander 50mm f/1 Nokton Review
Canon mf confirmation is very good, but the rf mount lens is 650g vs 484g in m/nikon mounts:

Nov 10, 2023 at 07:58 PM
highdesertmesa
Offline
Details
p.32 #3Voigtlander 50mm f/1 Nokton Review
serhan_ wrote:
Canon mf confirmation is very good, but the rf mount lens is 650g vs 484g in m/nikon mounts:


Z version is 598g

B&H is completely wrong on many Voigtlander lens specs. Another example: they say the 50 APO for Z mount has an MFD of 35cm when it's 45cm.
Nov 10, 2023 at 10:02 PM
philip_pj
Offline
Details
p.32 #4Voigtlander 50mm f/1 Nokton Review
Did Cosina produce stronger 50/1 lens variants for Canon and Nikon than for the VM version, like they did for the 35/50 APO pair? The weight gain is pretty large. It would be a good commercial decision to do so, and going to the trouble of developing the OEM ergonomics is a nice touch also.
Nov 10, 2023 at 10:56 PM
BastianK
Offline
Details
p.32 #5Voigtlander 50mm f/1 Nokton Review
philip_pj wrote:
Did Cosina produce stronger 50/1 lens variants for Canon and Nikon than for the VM version, like they did for the 35/50 APO pair? The weight gain is pretty large. It would be a good commercial decision to do so, and going to the trouble of developing the OEM ergonomics is a nice touch also.

From everything I have seen and based on the measurement of the diameter of the rear element (which is unnecessarily small for Z and RF): no.
Nov 11, 2023 at 01:26 AM
BastianK
Offline
Details
p.32 #6Voigtlander 50mm f/1 Nokton Review
BrandonSi wrote:
Just for reference, the $7.99 58mm screw on (non-vented) hood works great for the Nokton 50 1.1. Blocks maybe 10% more of the viewfinder, but looks much better, IMO.

https://www.amazon.com/dp/B07QWP1H22

Can you share a picture? It is only 8 bucks, but I already have enough cheap hoods lying around which I don't use :-)
Nov 11, 2023 at 01:27 AM
BrandonSi
Offline
Details
p.32 #7Voigtlander 50mm f/1 Nokton Review
BastianK wrote:
BrandonSi wroteJust for reference, the $7.99 58mm screw on (non-vented) hood works great for the Nokton 50 1.1. Blocks maybe 10% more of the viewfinder, but looks much better, IMO.

https://www.amazon.com/dp/B07QWP1H22
Can you share a picture? It is only 8 bucks, but I already have enough cheap hoods lying around which I don't use :-)


Of course! Not sure on if you wanted viewfinder blockage or the hood on the camera, but would be trivial to do both. Once I have enough coffee to properly power the camera this morning, I'll post some shots.
Nov 11, 2023 at 06:59 AM
BrandonSi
Offline
Details
p.32 #8Voigtlander 50mm f/1 Nokton Review
50 Nokton 1.1 (VM) with 58mm Amazon screw-in hood.






  GFX100S    Canon EF 40mm f/2.8 STM lens    40mm    f/3.2    1/30s    1250 ISO    0.0 EV  






  GFX100S    Canon EF 40mm f/2.8 STM lens    40mm    f/3.2    1/30s    1250 ISO    0.0 EV  






  GFX100S    Canon EF 40mm f/2.8 STM lens    40mm    f/3.2    1/30s    1250 ISO    0.0 EV  

Nov 11, 2023 at 08:51 AM
BrandonSi
Offline
Details
p.32 #9Voigtlander 50mm f/1 Nokton Review
Best I could do on the viewfinder blockage. I now have a lot of respect for people who can consistently get that shot for lens reviews!






  iPhone 14 Pro Max    iPhone 14 Pro Max back triple camera 2.22mm f/2.2 lens    2mm    f/2.2    1/86s    320 ISO    0.0 EV  

Nov 11, 2023 at 09:06 AM
LarsHP
Offline
Details
p.32 #10Voigtlander 50mm f/1 Nokton Review
Just to make it clear to everyone reading this:
BrandonSi is referring to the (old) f/1.1 lens, not the f/1.0 lens this thread is about. The f/1.0 version has 62mm filter thread in M and Z mount, while the Canon RF mount version has 67mm filter thread.

BrandonSi wrote:
Best I could do on the viewfinder blockage. I now have a lot of respect for people who can consistently get that shot for lens reviews!



Nov 11, 2023 at 11:10 AM
 


Search in Used Dept. 

BrandonSi
Offline
Details
p.32 #11Voigtlander 50mm f/1 Nokton Review
LarsHP wrote:
Just to make it clear to everyone reading this:
BrandonSi is referring to the (old) f/1.1 lens, not the f/1.0 lens this thread is about. The f/1.0 version has 62mm filter thread in M and Z mount, while the Canon RF mount version has 67mm filter thread.

BrandonSi wroteBest I could do on the viewfinder blockage. I now have a lot of respect for people who can consistently get that shot for lens reviews!


Yep! Old VM f/1.1 version, not the new ASPH 1.0 version (also VM). I purchased both to evaluate them, and found I prefer the 1.1 as my "fast / low light" 50mm, especially with the $1,000 USD difference in price.
Nov 11, 2023 at 11:13 AM
LarsHP
Offline
Details
p.32 #12Voigtlander 50mm f/1 Nokton Review
BastianK wrote:
philip_pj wroteDid Cosina produce stronger 50/1 lens variants for Canon and Nikon than for the VM version, like they did for the 35/50 APO pair? The weight gain is pretty large. It would be a good commercial decision to do so, and going to the trouble of developing the OEM ergonomics is a nice touch also.
From everything I have seen and based on the measurement of the diameter of the rear element (which is unnecessarily small for Z and RF): no.


You may be right, but Cosina themselves claim that the optical design is:

"Designed exclusively for the Nikon Z mount
Optics optimized for the image sensors of mirrorless cameras with the Nikon Z-mount are implemented."

https://www.cosina.co.jp/voigtlander/en/z-mount/nokton-50mm-f1-aspherical/

However, I haven't seen anybody trying the VM and Z mount version side by side on a Nikon Z camera, so ...
Nov 11, 2023 at 11:15 AM
nehemiahphoto
Offline
Details
p.32 #13Voigtlander 50mm f/1 Nokton Review
Fred Miranda wrote:
BrandonSi wroteGot the 1.1 in. Definitely smaller in girth, but actually a hair taller than the 50 1.0. The 1.1 weights ~50g less.
I have them both 6-bit coded, the 1.0 = Noctilux 0.95, the 1.1 = Noctilux f/1 . Ignore the EXIF, all were wide open.
It's a smart move to apply 6-bit coding to the CV 50/1.1 from the Noct f/1, as they produce similar results. I own both the CV 50/1.1 Nokton and the Leica 50/1 Noct, and the former is my preferred ultra-fast 50mm lens from Voigtlander when I don't want the bulk of the heavier Noct. Rendering-wise they are very similar, although the Voigtlander yields higher contrast and less vignetting.


Once the colors/contrast, SA and flare are changed, you’re really getting an appreciable different rendering—it’s all subjective, but that’s where so much of the magic rest. Then again, at Leica prices, it’s an expensive preference!
Nov 11, 2023 at 11:38 AM
Fred Miranda
Offline
Admin
Upload & Sell: On
Details
p.32 #14Voigtlander 50mm f/1 Nokton Review
nehemiahphoto wrote:
Fred Miranda wrote
BrandonSi wroteGot the 1.1 in. Definitely smaller in girth, but actually a hair taller than the 50 1.0. The 1.1 weights ~50g less.
I have them both 6-bit coded, the 1.0 = Noctilux 0.95, the 1.1 = Noctilux f/1 . Ignore the EXIF, all were wide open.
It's a smart move to apply 6-bit coding to the CV 50/1.1 from the Noct f/1, as they produce similar results. I own both the CV 50/1.1 Nokton and the Leica 50/1 Noct, and the former is my preferred ultra-fast 50mm lens from Voigtlander when I don't want the bulk of the heavier Noct. Rendering-wise they are very similar, although the Voigtlander yields higher contrast and less vignetting.
Once the colors/contrast, SA and flare are changed, you’re really getting an appreciable different rendering—it’s all subjective, but that’s where so much of the magic rest. Then again, at Leica prices, it’s an expensive preference!


Totally agree with you on how that affects the rendering. What I meant is that the rendering structure is alike, and sometimes I throw in a Lightroom preset that brings the color, contrast, and vignetting closer to the Noct. It's not an exact match, but it gets pretty close. Although, hands down, the original Leica 50/1 always takes the cake if you're after that particular look.

Here is one of my presets to make the CV 50/1.1 Nokton get even closer in rendering to the Leica 50/1 Noct:
https://www.fredmiranda.com/Buzz/VOIGTLANDER_50_1.1_LEICA_LOOK.zip
(It can also be used on the CV 50/1 for a lower contrast look)
Nov 11, 2023 at 11:56 AM
BrandonSi
Offline
Details
p.32 #15Voigtlander 50mm f/1 Nokton Review
Fred Miranda wrote:
nehemiahphoto wrote
Fred Miranda wrote
BrandonSi wroteGot the 1.1 in. Definitely smaller in girth, but actually a hair taller than the 50 1.0. The 1.1 weights ~50g less.
I have them both 6-bit coded, the 1.0 = Noctilux 0.95, the 1.1 = Noctilux f/1 . Ignore the EXIF, all were wide open.
It's a smart move to apply 6-bit coding to the CV 50/1.1 from the Noct f/1, as they produce similar results. I own both the CV 50/1.1 Nokton and the Leica 50/1 Noct, and the former is my preferred ultra-fast 50mm lens from Voigtlander when I don't want the bulk of the heavier Noct. Rendering-wise they are very similar, although the Voigtlander yields higher contrast and less vignetting.
Once the colors/contrast, SA and flare are changed, you’re really getting an appreciable different rendering—it’s all subjective, but that’s where so much of the magic rest. Then again, at Leica prices, it’s an expensive preference!
Totally agree with you on how that affects the rendering. What I meant is that the rendering structure is alike, and sometimes I throw in a Lightroom preset that brings the color, contrast, and vignetting closer to the Noct. It's not an exact match, but it gets pretty close. Although, hands down, the original Leica 50/1 always takes the cake if you're after that particular look.

Here is one of my presets to make the CV 50/1.1 Nokton get even closer in rendering to the Leica 50/1 Noct:
https://www.fredmiranda.com/Buzz/VOIGTLANDER_50_1.1_LEICA_LOOK.zip
(It can also be used on the CV 50/1 for a lower
...Show more →

Oooh, I like it. Thanks for sharing that!
Nov 11, 2023 at 12:21 PM
nehemiahphoto
Offline
Details
p.32 #16Voigtlander 50mm f/1 Nokton Review
Fred Miranda wrote:
nehemiahphoto wrote
Fred Miranda wrote
BrandonSi wroteGot the 1.1 in. Definitely smaller in girth, but actually a hair taller than the 50 1.0. The 1.1 weights ~50g less.
I have them both 6-bit coded, the 1.0 = Noctilux 0.95, the 1.1 = Noctilux f/1 . Ignore the EXIF, all were wide open.
It's a smart move to apply 6-bit coding to the CV 50/1.1 from the Noct f/1, as they produce similar results. I own both the CV 50/1.1 Nokton and the Leica 50/1 Noct, and the former is my preferred ultra-fast 50mm lens from Voigtlander when I don't want the bulk of the heavier Noct. Rendering-wise they are very similar, although the Voigtlander yields higher contrast and less vignetting.
Once the colors/contrast, SA and flare are changed, you’re really getting an appreciable different rendering—it’s all subjective, but that’s where so much of the magic rest. Then again, at Leica prices, it’s an expensive preference!
Totally agree with you on how that affects the rendering. What I meant is that the rendering structure is alike, and sometimes I throw in a Lightroom preset that brings the color, contrast, and vignetting closer to the Noct. It's not an exact match, but it gets pretty close. Although, hands down, the original Leica 50/1 always takes the cake if you're after that particular look.

Here is one of my presets to make the CV 50/1.1 Nokton get even closer in rendering to the Leica 50/1 Noct:
https://www.fredmiranda.com/Buzz/VOIGTLANDER_50_1.1_LEICA_LOOK.zip
(It can also be used on the CV 50/1 for a lower
...Show more →

Great share Do you have any others?

And would you mind to explain how you made it?
Nov 11, 2023 at 03:27 PM
Fred Miranda
Offline
Admin
Upload & Sell: On
Details
p.32 #17Voigtlander 50mm f/1 Nokton Review
nehemiahphoto wrote:
Fred Miranda wrote
nehemiahphoto wrote
Fred Miranda wrote
BrandonSi wroteGot the 1.1 in. Definitely smaller in girth, but actually a hair taller than the 50 1.0. The 1.1 weights ~50g less.
I have them both 6-bit coded, the 1.0 = Noctilux 0.95, the 1.1 = Noctilux f/1 . Ignore the EXIF, all were wide open.
It's a smart move to apply 6-bit coding to the CV 50/1.1 from the Noct f/1, as they produce similar results. I own both the CV 50/1.1 Nokton and the Leica 50/1 Noct, and the former is my preferred ultra-fast 50mm lens from Voigtlander when I don't want the bulk of the heavier Noct. Rendering-wise they are very similar, although the Voigtlander yields higher contrast and less vignetting.
Once the colors/contrast, SA and flare are changed, you’re really getting an appreciable different rendering—it’s all subjective, but that’s where so much of the magic rest. Then again, at Leica prices, it’s an expensive preference!
Totally agree with you on how that affects the rendering. What I meant is that the rendering structure is alike, and sometimes I throw in a Lightroom preset that brings the color, contrast, and vignetting closer to the Noct. It's not an exact match, but it gets pretty close. Although, hands down, the original Leica 50/1 always takes the cake if you're after that particular look.

Here is one of my presets to make the CV 50/1.1 Nokton get even closer in rendering to the Leica 50/1 Noct:
https://www.fredmiranda.com/Buzz/VOIGTLANDER_50_1.1_LEICA_LOOK.zip
(It can also be used on the CV 50/1 for a lower contrast look)
Great share Do you have any others?

And would you mind to explain how you made it?


I've adjusted the color, contrast, and vignetting for the 50/1.1 Voigtlander lens to match the 50/1 Noctilux lens. I did this by examining images from both lenses and comparing them directly in Lightroom under the same lighting and framing conditions. Basically, I did a test to see how the lenses render images and captured photos in various lighting conditions using both lenses on a tripod. I'll try to find the samples for comparison.
Nov 11, 2023 at 04:02 PM
nehemiahphoto
Offline
Details
p.32 #18Voigtlander 50mm f/1 Nokton Review
Fred Miranda wrote:
nehemiahphoto wrote
Fred Miranda wrote
nehemiahphoto wrote
Fred Miranda wrote
BrandonSi wroteGot the 1.1 in. Definitely smaller in girth, but actually a hair taller than the 50 1.0. The 1.1 weights ~50g less.
I have them both 6-bit coded, the 1.0 = Noctilux 0.95, the 1.1 = Noctilux f/1 . Ignore the EXIF, all were wide open.
It's a smart move to apply 6-bit coding to the CV 50/1.1 from the Noct f/1, as they produce similar results. I own both the CV 50/1.1 Nokton and the Leica 50/1 Noct, and the former is my preferred ultra-fast 50mm lens from Voigtlander when I don't want the bulk of the heavier Noct. Rendering-wise they are very similar, although the Voigtlander yields higher contrast and less vignetting.
Once the colors/contrast, SA and flare are changed, you’re really getting an appreciable different rendering—it’s all subjective, but that’s where so much of the magic rest. Then again, at Leica prices, it’s an expensive preference!
Totally agree with you on how that affects the rendering. What I meant is that the rendering structure is alike, and sometimes I throw in a Lightroom preset that brings the color, contrast, and vignetting closer to the Noct. It's not an exact match, but it gets pretty close. Although, hands down, the original Leica 50/1 always takes the cake if you're after that particular look.

Here is one of my presets to make the CV 50/1.1 Nokton get even closer in rendering to the Leica 50/1 Noct:
https://www.fredmiranda.com/Buzz/VOIGTLANDER_50_1.1_LEICA_LOOK.zip
(It can also be used on the CV 50/1 for a lower contrast look)
Great share Do you have any others?

And would you mind to explain how you made it?
I've adjusted the color, contrast, and vignetting for the 50/1.1 Voigtlander lens to match the 50/1 Noctilux lens. I did this by examining images from both lenses and comparing them directly in Lightroom under the same lighting and framing conditions. Basically, I did a test to see how the lenses render images and captured photos in various lighting conditions using both lenses on a tripod. I'll try to find the samples for comparison.


I did the same with a 55 ZA trying to get it too look like my ZM 50/1.5, even used a color passport checker. I didn't expect the ZM bokeh, but I was hoping to hit the brilliant tonal and contrast look of the ZM 50, but I couldn't get it that well. Tried some other lenses with this method to with modest success. Curious and hopeful to try yours. I've had more success with lenses that look more similar to start with.
Nov 11, 2023 at 04:52 PM
Fred Miranda
Offline
Admin
Upload & Sell: On
Details
p.32 #19Voigtlander 50mm f/1 Nokton Review
nehemiahphoto wrote:
Fred Miranda wrote
nehemiahphoto wrote
Fred Miranda wrote
nehemiahphoto wrote
Fred Miranda wroteIt's a smart move to apply 6-bit coding to the CV 50/1.1 from the Noct f/1, as they produce similar results. I own both the CV 50/1.1 Nokton and the Leica 50/1 Noct, and the former is my preferred ultra-fast 50mm lens from Voigtlander when I don't want the bulk of the heavier Noct. Rendering-wise they are very similar, although the Voigtlander yields higher contrast and less vignetting.
Once the colors/contrast, SA and flare are changed, you’re really getting an appreciable different rendering—it’s all subjective, but that’s where so much of the magic rest. Then again, at Leica prices, it’s an expensive preference!
Totally agree with you on how that affects the rendering. What I meant is that the rendering structure is alike, and sometimes I throw in a Lightroom preset that brings the color, contrast, and vignetting closer to the Noct. It's not an exact match, but it gets pretty close. Although, hands down, the original Leica 50/1 always takes the cake if you're after that particular look.

Here is one of my presets to make the CV 50/1.1 Nokton get even closer in rendering to the Leica 50/1 Noct:
https://www.fredmiranda.com/Buzz/VOIGTLANDER_50_1.1_LEICA_LOOK.zip
(It can also be used on the CV 50/1 for a lower contrast look)
Great share Do you have any others?

And would you mind to explain how you made it?
I've adjusted the color, contrast, and vignetting for the 50/1.1 Voigtlander lens to match the 50/1 Noctilux lens. I did this by examining images from both lenses and comparing them directly in Lightroom under the same lighting and framing conditions. Basically, I did a test to see how the lenses render images and captured photos in various lighting conditions using both lenses on a tripod. I'll try to find the samples for comparison.
I did the same with a 55 ZA trying to get it too look like my ZM 50/1.5, even used a color passport checker. I didn't expect the ZM bokeh, but I was hoping to hit the brilliant tonal and contrast look of the ZM 50, but I couldn't get it that well. Tried some other lenses with this method to with modest success. Curious and hopeful to try yours. I've had more success with lenses that look more similar to start with.


Same here. I could not get the 55/1.8 ZA to look like the ZM 50/1.5. It's easier to do the other way around.
Either way, the rendering structure from these two lenses are not similar. In the case of the CV 50/1.1 and Leica 50/1 Noct, they have very similar optical designs. That was during a time when Cosina was getting "inspired" by Leica.
Nov 11, 2023 at 05:04 PM
nehemiahphoto
Offline
Details
p.32 #20Voigtlander 50mm f/1 Nokton Review
Fred Miranda wrote:
nehemiahphoto wrote
Fred Miranda wrote
nehemiahphoto wrote
Fred Miranda wrote
nehemiahphoto wroteOnce the colors/contrast, SA and flare are changed, you’re really getting an appreciable different rendering—it’s all subjective, but that’s where so much of the magic rest. Then again, at Leica prices, it’s an expensive preference!
Totally agree with you on how that affects the rendering. What I meant is that the rendering structure is alike, and sometimes I throw in a Lightroom preset that brings the color, contrast, and vignetting closer to the Noct. It's not an exact match, but it gets pretty close. Although, hands down, the original Leica 50/1 always takes the cake if you're after that particular look.

Here is one of my presets to make the CV 50/1.1 Nokton get even closer in rendering to the Leica 50/1 Noct:
https://www.fredmiranda.com/Buzz/VOIGTLANDER_50_1.1_LEICA_LOOK.zip
(It can also be used on the CV 50/1 for a lower contrast look)
Great share Do you have any others?

And would you mind to explain how you made it?
I've adjusted the color, contrast, and vignetting for the 50/1.1 Voigtlander lens to match the 50/1 Noctilux lens. I did this by examining images from both lenses and comparing them directly in Lightroom under the same lighting and framing conditions. Basically, I did a test to see how the lenses render images and captured photos in various lighting conditions using both lenses on a tripod. I'll try to find the samples for comparison.
I did the same with a 55 ZA trying to get it too look like my ZM 50/1.5, even used a color passport checker. I didn't expect the ZM bokeh, but I was hoping to hit the brilliant tonal and contrast look of the ZM 50, but I couldn't get it that well. Tried some other lenses with this method to with modest success. Curious and hopeful to try yours. I've had more success with lenses that look more similar to start with.
Same here. I could not get the 55/1.8 ZA to look like the ZM 50/1.5. It's easier to do the other way around.
Either way, the rendering structure from these two lenses are not similar. In the case of the CV 50/1.1 and Leica 50/1 Noct, they have very similar optical designs. That was during a time when Cosina was getting "inspired" by Leica.


Quite inspired lol. Having said that, many smaller lenses makers still seem to being chasing Leica in some way--optics, advertising, lens naming, etc. Though CV nowadays are marching to their own drum which I love to see. I always found the ZA to render flatly though it's very sharp with fast AF. The ZM is the opposite with so-so optics but gorgeous files. Still miss mine.

What are look-a-like lens profiles have you tried?


Edited on Nov 11, 2023 at 06:28 PM · View previous versions
Nov 11, 2023 at 05:13 PM


FM ForumsSony ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister