Fred Miranda wrote: josh-himes wroteFred Miranda wrotelifeandmylens wrote3 copies arrived today.
1st copy would not mount to the camera at all. Tried several times, wouldn't "click" into place. I read somewhere about grinding something down, but wasn't too interested in that with two other copies to try.
Second copy mounted fine. First quick test was at 1m to check range finder calibration. Failed. It was off by a decent amount. Didn't do anymore testing.
Third copy mounted fine. Rangefinder calibration was pretty much perfect at 1m, 2m and 3m! Next checked the hard stop and patch alignment at infinity...passed. Next decentering test...passed. Next field curvature/tilt test...passed. I think I got a good one!
Then tested out of curiosity it on the SL601 and it resulted in more tilted curvature. But if I had to guess the M lenses don't perform quite as well on the SL as the M11 and the newer SL2/S. I have a SL2-S arriving tomorrow that I'd like to compare also.Keep in mind that if it nails focus at f/1 using the rangefinder, it may not perform optimally at f/1.4 and f/2. All these fast lenses have focus shift and therefore, the lens should front-focus slightly when shooting wide open through the rangefinder. The good news is that the CV 50/1 Nokton does not have very noticeable focus shift compared to vintage lenses since it's better corrected for spherical aberration, so you may not notice this in real images.Thanks for this info Fred. I have had the 50 F1 for a week and it's an excellent lens. I noticed that my copy front focuses by a small but noticeable amount wide open with the M11 rangefinder. I tested for focus shift at 1M with a lens calibration target and you are exactly right - the focus shifts just a little at each half stop between F1 & F2. By F2, the focus point perfectly matches the rangefinder and from there on out, either there is no further focus shift, or it's hidden in the DOF. I'm not sure you would see the focus shift with a normal target (small print, etc), but you can see it with the angled calibration target.
I had considered sending the lens back, with the hope of getting one that is perfectly calibrated to the rangefinder at F1. After seeing the focus shift, I'm wondering if it's operating as designed and the RF is actually calibrated at F1.4 or 2? I'm curious about your thoughts, since you have quite a bit of experience with this lens. Otherwise, the lens seems perfectly centered and is acceptably sharp across the frame wide open at infinity.Yes, that's normal operation. The lens is calibrated taking account focus shift and therefore it's usually perfect aligned with the rangefinder one stop down from wide open. If it would be perfectly calibrated at f/1, by f/2.8 the subject would be noticeably out of focus. With vintage lenses like the Leica 50/1 Noctilux for example this is even more apparent. It's really only an issue with fast and ultra fast lenses since the amount of aberration is higher wide open compared to slower lenses.
Of course, this is an issue with rangefinder focusing only. For those focusing with the help of LV, this is a non-issue. ...Show more →
Thanks for the explanation Fred. I will hang on to my copy, because it performs exceptionally well at infinity. It's actually easy enough to hit focus wide open with the RF, now that I know the required adjustment. Focus and recompose is a different story, but that is where the EVF really helps.
After using both these lenses in a variety of settings for a week, many, not all, of the image pairs (not all shown here) have struck me as if the images from the Noctilux were as if from a dream, and the images from the Nokton were as if from a documentary. Not a very nuts and bolts appraisal, and possibly I've looked at them too long.
I know this is old, but thanks for posting all these comparisons. These are the 2 lenses I've been eyeing for that dreamy look. I've got a great copy of the cv f/1 and just found/bought a mint Noctilux v2 with a recent CLA. Curious to play around with both these lenses myself. Like you, I only plan on keeping one of them, selling the other.
There are a lot of sample shots at f/1 in this thread that show image crops from all parts of the frame, but here's one with the same subject moved to different parts of the frame.
Shot on the SL2-S, so results may be better on an M camera. Each shot was re-focused at max magnification.
These are shot horizontally from center to center-middle to center-edge. Results moving diagonal toward the corner were similar.
Without shooting this on the M11 again, which I no longer own, I can't fairly compare this copy of the CV 50 f/1 to my last. But as I reported previously, my last copy had substantial focus shift at infinity but was very sharp at closer distances. This copy seems to be the reverse – no focus shift at infinity but a bit weaker sharpness at closer distances. There is also weaker performance at closer distances at f/1 off center, but that may be due to the thicker SL2-S sensor cover glass.
Crops are 200% magnification – subject at ~3m distance
I've been reading along here and it's very interesting to see these discussions on Voigtlander's signature product (or at least one of the more significant optics they have at the moment).
This is honestly what I appreciate so much about this forum
f/2 at maximum macro distance allowed by the adapter. I think stopping down to f/2 is reasonable considering Leica stops down the Q2 to f/2.8 at macro distances. At f/1, the specular highlights were much too distracting for a scene like this, and the point of focus was too soft.
CV 50 f/1 at f/2 -|- closest focus with macro adapter
LEICA SL2-SUnknown Lens lens50mmf/2.41/125s100 ISO0.0 EV
lifeandmylens wrote: Fred Miranda wroteWith vintage lenses like the Leica 50/1 Noctilux for example this is even more apparent.Does the focus patch on your Noctilux not line up at f/1, and you just compensate for it?
Hi there! My specific copy does not because I asked Leica to calibrate it to f/1. The downside is that when focusing with the RF patch, the results won't be optimal when the lens is stopped down one or two stops since the lens is no longer compensated to address focus shift.
Not to worry though, there are two options to help you out!
Align the lens to f/1. If the lens is front-focusing, you can try adjusting the focus by removing shims, or sending it in for adjustment. Basically the focusing core needs to be brought closer to the camera.
Or, compensate with the RF patch during shooting while knowing that the lens has a front-focusing issue.
Personally, I always opt for the first choice since I mostly shoot these lenses wide open.
Fred Miranda wrote: lifeandmylens wroteFred Miranda wroteWith vintage lenses like the Leica 50/1 Noctilux for example this is even more apparent.Does the focus patch on your Noctilux not line up at f/1, and you just compensate for it?Hi there! My specific copy does not because I asked Leica to calibrate it to f/1. The downside is that when focusing with the RF patch, the results won't be optimal when the lens is stopped down one or two stops since the lens is no longer compensated to address focus shift.
Not to worry though, there are two options to help you out!
Align the lens to f/1. If the lens is front-focusing, you can try adjusting the focus by removing shims, or sending it in for adjustment. Basically the focusing core needs to be brought closer to the camera.
Or, compensate with the RF patch during shooting while knowing that the lens has a front-focusing issue.
Personally, I always opt for the first choice since I mostly shoot these lenses wide open....Show more →
I’ve had two sets of the M11 and CV 50 f/1 now, and both had perfect focus at f/1 with the rangefinder. I can’t imagine owning an f/1 lens and not being able to focus it at f/1 using the rangefinder. I think CV has just kicked out a few mis-calibrated units lately.
f/1 -|- Rangefinder focus at MFD was on the corner of the booklet
Hello,
I’m very interested in this lens, now that it’s coming out next month in Nikon Z mount.
There seems to be some sample variation though that some users have experimented.
Is there a summary sheet of how to do to the lens tests that I’ve seen some folks do when their lens arrives? I would like to know how to test for centering, tilt, sharpness etc. has anyone put together a summary of how to do these tests?
I’m in Canada and definitely don’t have the option of ordering 3 samples, testing them and keeping only the best. I’ve always supported the local independent, family-owned camera store and this type of lens would certainly be a special order for them.
EVF f1 focus for Z mount shouldn't matter since just live view. Fred's centering test is very good. The sharpness WO is very good to me even when I has tested it on GFX100.
I have now collapsed my kit into the CV 21 1.4 and this CV 50 1.0. They have the same front filter size so I can use my favorite achromat for closeups using LV on M10M. Then I have the astrhori 40 5.6 for compact one, though I might replace with the CV 40 2.8.
In any case if you're able to find a great copy of this lens, it's a marriage type of keeping level!
The Nikon Z version was officially announced on January 16th, so more than a month earlier than the Canon RF mount version. Interesting that an E mount version still hasn't been announced, though.
Alan Parker wrote:
Interestingly enough this is now confirmed to be coming to Canon RF mount, ahead of Sony E mount or Nikon Z.
Very different exterior design too.
Crazy, are we not going to get any new Voigtlander FE Mount Lenses? I understand that they already have some made for E mount, but they are now releasing new unique lenses for other mounts and skipping the FE mount.
Outside of increased field curvature, what are the downsides to adapting this lens to Sony bodies like the A7SIII and A7IV!? I thought I’d seen something about the rear element protruding into the body close to the sensor?? Is this a real issue??
I love this lens. Surprising no one, it's challenging to nail subjects eyes at f/1. Even the slightest movement by the photographer or the subject and you've missed the point of best focus a little. With that said, the output is often still 'usable' (your mileage may vary on what you describe as usable). Also, its performance at smaller f-stops is phenomenal (I get it, there's a size penalty, but if you're traveling and it's the only lens you have on your camera you learn to live with it).
Jenny by Jim Fischer, on Flickr
Zeiss Ikon ZM, Voigtlander 50mm f/1 Nokton VM (@f/2), Cinestill 800T
Jenny by Jim Fischer, on Flickr
Zeiss Ikon ZM, Voigtlander 50mm f/1 Nokton VM (@f/1), Kodak Tri-X 400, Xtol 1:1
Jenny by Jim Fischer, on Flickr
Zeiss Ikon ZM, Voigtlander 50mm f/1 Nokton VM (@f/2), Kodak Tri-X 400, Xtol 1:1
Little Island by Jim Fischer, on Flickr
Zeiss Ikon ZM, Voigtlander 50mm f/1 Nokton VM (@f/5.6), Kodak Tri-X 400, Xtol 1:1
Jenny by Jim Fischer, on Flickr
Zeiss Ikon ZM, Voigtlander 50mm f/1 Nokton VM (@f/1), Kodak Tri-X 400, Xtol 1:1
Jenny by Jim Fischer, on Flickr
Zeiss Ikon ZM, Voigtlander 50mm f/1 Nokton VM (@f/1), Kodak Tri-X 400, Xtol 1:1
Jenny by Jim Fischer, on Flickr
Zeiss Ikon ZM, Voigtlander 50mm f/1 Nokton VM (@f/1), Kodak Tri-X 400, Xtol 1:1
NYer in Chinatown by Jim Fischer, on Flickr
Zeiss Ikon ZM, Voigtlander 50mm f/1 Nokton VM (@f/1), Kodak Tri-X 400, Xtol 1:1