Zenon Char wrote:
It also has High Speed Display for RF lenses only. I wonder if it will do anything on the R5 & 6.
RF lenses have the lens correction data stored-in/processed-by the lens, making the EVF display smoother with RF glass. This option is greyed out for EF. The difference on the R wasn't super noticeable, but on the R5 at 12/20fps, it may make more of a difference.
highdesertmesa wrote: Zenon Char wroteIt also has High Speed Display for RF lenses only. I wonder if it will do anything on the R5 & 6.RF lenses have the lens correction data stored-in/processed-by the lens, making the EVF display smoother with RF glass. This option is greyed out for EF. The difference on the R wasn't super noticeable, but on the R5 at 12/20fps, it may make more of a difference.
I didn't see much difference with R and RF24-105 either. Let's hope so.
We have HSD, making sure Viewfinder Review is off and insuring the EVF is at 60 pfs. Not sure about that 3rd one. The manual says 120 for stills so I'm assuming it drops to 60 at 12/20fps. That would make sense and we wouldn't to keep going in there to change it.
Viewfinder Review would be a good candidate for the Custom menus unless it also drops out at 12/20fps. I also read turning the LCD review off helps by not wasting resources but I can't back that. It is disabled on my R and I use it manually. It will help with battery life.
melcat wrote: Zenon Char wroteOh yeah. This manual has no index. Hard to find stuff but it is better than no manual.If it's like the German version it's a searchable PDF. On Mac Preview, just type a word in the search box at top right.
Zenon Char wrote:
It also has High Speed Display for RF lenses only. I wonder if it will do anything on the R5 & 6.
highdesertmesa wrote:
RF lenses have the lens correction data stored-in/processed-by the lens, making the EVF display smoother with RF glass. This option is greyed out for EF. The difference on the R wasn't super noticeable, but on the R5 at 12/20fps, it may make more of a difference.
Why do you need the lens correction in the EVF? I'd rather turn it off to see the naked truth before PP, and maybe save a little processing power.
highdesertmesa wrote: Zenon Char wroteIt also has High Speed Display for RF lenses only. I wonder if it will do anything on the R5 & 6.RF lenses have the lens correction data stored-in/processed-by the lens, making the EVF display smoother with RF glass. This option is greyed out for EF. The difference on the R wasn't super noticeable, but on the R5 at 12/20fps, it may make more of a difference.
Actually the manual doesn’t say RF lenses only but it is possible it may be greyed out when you mount an EF.
highdesertmesa wrote:
I mentioned this in another thread, but I read the limitation is related to the aperture blades and not the autofocus motors. The entire lens as a system has to keep up in mechanical shutter mode, and some can't.
It must have been overlooked but i still would like to discuss this one:
Page 452
"Caution
Approx. 12 shots/sec. continuous shooting speed with [] is available under the following conditions.
• Room temperature (23°C/73°F)"
So what can we expect to the shots/sec above room temperature?
Will it drop significantly in higher temperatures?
Has this disclaimer been mentioned with previous releases from Canon?
Has this disclaimer been mentioned with previous releases from Canon?
This kind of thing is standard with most electronic equipment. It's a particular annoyance to those of us who live in hot countries. The whole camera is not claimed to work above 40°C or below 0°C. Of course it probably will, and many of us expect it to. Somehow we've come to accept this garbage from electronics companies. Imagine your car's manual said it wouldn't operate outside those temperatures.
The R5/R6 are intended for mass appeal. They are not a replacement of the 1DX but a 5D/6D series i.e. not bulletproof or built to work in extreme temperatures, as that that would mean that the camera has to be built bigger and heavier, and most people don’t want that. The R1 with an integrated battery grip will follow I’m sure.
melcat wrote: therealthings wroteHas this disclaimer been mentioned with previous releases from Canon?This kind of thing is standard with most electronic equipment. It's a particular annoyance to those of us who live in hot countries. The whole camera is not claimed to work above 40°C or below 0°C. Of course it probably will, and many of us expect it to. Somehow we've come to accept this garbage from electronics companies. Imagine your car's manual said it wouldn't operate outside those temperatures.
bobbytan wrote:
They are not a replacement of the 1DX but a 5D/6D series i.e. not bulletproof or built to work in extreme temperatures, as that that would mean that the camera has to be built bigger and heavier, and most people don’t want that.
The instructions for my 1Ds Mk III says 0°C to 45°C, ≤ 85% humidity. I'm pretty sure I've used it below 0° and in more humid environments than that. My point was that Canon are covering themselves, and the camera may well work outside the claimed range, just as the frame rate of the R5 might not be affected much at low temperatures. I find it disrespectful to customers.
therealthings wrote:
It must have been overlooked but i still would like to discuss this one:
Page 452
"Caution
Approx. 12 shots/sec. continuous shooting speed with [] is available under the following conditions.
• Room temperature (23°C/73°F)"
So what can we expect to the shots/sec above room temperature?
Will it drop significantly in higher temperatures?
Has this disclaimer been mentioned with previous releases from Canon?
I think it is the opposite. As a batter get colder it can lose power. Most testing is done at room temperature because they need a base number. People have been push their gear at both extremes for decades.
Zenon Char wrote: therealthings wroteIt must have been overlooked but i still would like to discuss this one:
Page 452
"Caution
Approx. 12 shots/sec. continuous shooting speed with [] is available under the following conditions.
• Room temperature (23°C/73°F)"
So what can we expect to the shots/sec above room temperature?
Will it drop significantly in higher temperatures?
Has this disclaimer been mentioned with previous releases from Canon?I think it is the opposite. As a batter get colder it can lose power. Most testing is done at room temperature because they need a base number. People have been push their gear at both extremes for decades.
So you think it relates to battery power and cold? I was thinking it related to the heat buildup during video (heavy processing). Just like how thermo throttling works in laptop cpu's.
I don’t agree that they are being disrespectful to their customers. They are being a little conservative and leaning on the side of caution. That’s not being disrespectful.
melcat wrote: bobbytan wroteThey are not a replacement of the 1DX but a 5D/6D series i.e. not bulletproof or built to work in extreme temperatures, as that that would mean that the camera has to be built bigger and heavier, and most people don’t want that.The instructions for my 1Ds Mk III says 0°C to 45°C, ≤ 85% humidity. I'm pretty sure I've used it below 0° and in more humid environments than that. My point was that Canon are covering themselves, and the camera may well work outside the claimed range, just as the frame rate of the R5 might not be affected much at low temperatures. I find it disrespectful to customers.
therealthings wrote: Zenon Char wrotetherealthings wroteIt must have been overlooked but i still would like to discuss this one:
Page 452
"Caution
Approx. 12 shots/sec. continuous shooting speed with [] is available under the following conditions.
• Room temperature (23°C/73°F)"
So what can we expect to the shots/sec above room temperature?
Will it drop significantly in higher temperatures?
Has this disclaimer been mentioned with previous releases from Canon?I think it is the opposite. As a batter get colder it can lose power. Most testing is done at room temperature because they need a base number. People have been push their gear at both extremes for decades.So you think it relates to battery power and cold? I was thinking it related to the heat buildup during video (heavy processing). Just like how thermo throttling works in laptop cpu's.
You were talking about shots/sec, not video. At least that is what I assumed. I could be wrong.
luminaire wrote: highdesertmesa wroteI mentioned this in another thread, but I read the limitation is related to the aperture blades and not the autofocus motors. The entire lens as a system has to keep up in mechanical shutter mode, and some can't.It's supported at 16fps in EF cameras though.
— Maybe because the 1DX3 has a giant body full of goodies to make that possible?
Zenon Char wrote: therealthings wroteZenon Char wrotetherealthings wroteIt must have been overlooked but i still would like to discuss this one:
Page 452
"Caution
Approx. 12 shots/sec. continuous shooting speed with [] is available under the following conditions.
• Room temperature (23°C/73°F)"
So what can we expect to the shots/sec above room temperature?
Will it drop significantly in higher temperatures?
Has this disclaimer been mentioned with previous releases from Canon?I think it is the opposite. As a batter get colder it can lose power. Most testing is done at room temperature because they need a base number. People have been push their gear at both extremes for decades.So you think it relates to battery power and cold? I was thinking it related to the heat buildup during video (heavy processing). Just like how thermo throttling works in laptop cpu's.You were talking about shots/sec, not video. At least that is what I assumed. I could be wrong.
No you are correct i am talking stills, but not shooting video can also build up heat i assume. When shooting large bursts at a race track e.g., or repeatedly passing by birds in flight heats up components as well. Now add a hot environment to the mix and you might get a degration in fps. At least that was my logic.