fredmiranda.com Login
This topic is in the 2020 archive. You can read it and like its posts here. It is read only.

Archive 2020Canon R5 user manual

  
 
lighthound
Offline
Details
p.4 #1Canon R5 user manual
I keep hearing about this 45mp @ 20fps in ES as being some kind of negative.
So when using silent mode does the camera really keep firing until it reaches 20 frames even though you only pressed the shutter for a fraction of a second?
I ask because I shoot at 10fps in mechanical all the time and when I don't want or need all 10 frames I simply remove my finger from the shutter which is usually 3-5 frames depending on how long I hit that shutter button.
Jul 27, 2020 at 08:33 AM
Zenon Char
Offline
Details
p.4 #2Canon R5 user manual
Pius Sullivan wrote:
Jochenb wroteAnother thing: the R5 always shoots 20FPS when using the electronic shutter.

Must be very anoying to shoot so many large files everytime you shoot a burst with the 45MP R5 (in silent mode).
I have a Sony A9 and hardly ever use the 20FPS mode.
Many subjects really don't need 20FPS.
The only work around I could find for that with the 1dx III in ES mode was to limit my shot count to 12 or 15 or any number I wanted. when the burst count ended would lift my finger off the shutter and start again. Not good if you're shooting a burst where you might miss an action shot that's important.
Not sure if the R5 or R6 will have that in the menu.



The word is fixed at 20.
Jul 27, 2020 at 08:39 AM
Zenon Char
Offline
Details
p.4 #3Canon R5 user manual
lighthound wrote:
I keep hearing about this 45mp @ 20fps in ES as being some kind of negative.
So when using silent mode does the camera really keep firing until it reaches 20 frames even though you only pressed the shutter for a fraction of a second?
I ask because I shoot at 10fps in mechanical all the time and when I don't want or need all 10 frames I simply remove my finger from the shutter which is usually 3-5 frames depending on how long I hit that shutter button.


That is a good question. It will just keep firing as long as the shutter is pressed. We have seen video on that. Not sure about short bursts. My guess is it stops as soon as you lift you finger. At 1 second I expect you will be getting close to 20 anyway
Jul 27, 2020 at 08:43 AM
Jochenb
Offline
Details
p.4 #4Canon R5 user manual
lighthound wrote:
I keep hearing about this 45mp @ 20fps in ES as being some kind of negative.
So when using silent mode does the camera really keep firing until it reaches 20 frames even though you only pressed the shutter for a fraction of a second?
I ask because I shoot at 10fps in mechanical all the time and when I don't want or need all 10 frames I simply remove my finger from the shutter which is usually 3-5 frames depending on how long I hit that shutter button.


I also do this, but there's a big difference between 10 and 20 fps. That's why I hardly use it on the A9.
You'll end up with so much more files every short burst that you shoot. Not ideal with 45MP files that'll fill up your memory cards quickly.


Jul 27, 2020 at 08:43 AM
bobbytan
Offline
Details
p.4 #5Canon R5 user manual
I do like the silent mode a lot as shutter noise bothers me - especially when it’s really loud like the 1DX. The mechanical shutter noise of the newer Sony models are okay. So I will be quite disappointed if you cannot use the e-shutter in single mode. I may have to do a one-touch or touch-and-release ... but that may still cause the camera to fire a sequence of several shots - and I wouldn’t like that if I am shooting a perched bird.

Zenon Char wrote:
lighthound wroteI keep hearing about this 45mp @ 20fps in ES as being some kind of negative.
So when using silent mode does the camera really keep firing until it reaches 20 frames even though you only pressed the shutter for a fraction of a second?
I ask because I shoot at 10fps in mechanical all the time and when I don't want or need all 10 frames I simply remove my finger from the shutter which is usually 3-5 frames depending on how long I hit that shutter button.
That is a good question. It will just keep firing as long as the shutter is pressed. We have seen video on that. Not sure about short bursts. My guess is it stops as soon as you lift you finger. At 1 second I expect you will be getting close to 20 anyway



Edited on Jul 27, 2020 at 08:58 AM · View previous versions
Jul 27, 2020 at 08:54 AM
Jochenb
Offline
Details
p.4 #6Canon R5 user manual
bobbytan wrote:
I do like the silent mode a lot as shutter noise bothers me - especially when it’s really loud like the 1DX. The mechanical shutter noise of the newer Sony models are okay. So I will be quite disappointed if you cannot use the e-shutter in single mode. I may just have to one-touch or touch-and-release the shutter - but that may still cause the camera to fire a sequence of several shots - and I wouldn’t like that if I am shooting a perched bird.

Zenon Char wrote
lighthound wroteI keep hearing about this 45mp @ 20fps in ES as being some kind of negative.
So when using silent mode does the camera really keep firing until it reaches 20 frames even though you only pressed the shutter for a fraction of a second?
I ask because I shoot at 10fps in mechanical all the time and when I don't want or need all 10 frames I simply remove my finger from the shutter which is usually 3-5 frames depending on how long I hit that shutter button.
That is a good question. It will just keep firing as long as the shutter is pressed. We have seen video on that. Not sure about short bursts. My guess is it stops as soon as you lift you finger. At 1 second I expect you will be getting close to 20 anyway


Oh but you can still use the electronic shutter in single shot mode.
We were talking about burst shooting.

Jul 27, 2020 at 08:56 AM
Zenon Char
Offline
Details
p.4 #7Canon R5 user manual
Jochenb wrote:
Zenon Char wroteI read this elsewhere. Are this persons numbers accurate?

High-speed Continuous + shooting with MS is linked to battery capacity (ref. R5 Advanced user guide, page 452 in the Danish version).

When the battery capacity falls below ca.60% the MS FPS automatically drops from drive Mode A (the fastest) to a slower drive mode. The same applies when using a battery grip, remaining capacity must be around 60%.

So if we go with the CIPA rating for battery capacity which is 320, then we get about 12 seconds of 12 fps-shooting before the drive mode drops to a slower mode.
I just read this section in the Dutch manual.

The High-speed Continuous + (12FPS) is only available when you have at least around 60% of battery power.
They also mention it's only available at room temperature (23°C) and at shutter speeds of 1/1000 or faster.


From this link. I suspected 60% gives them a no complaint buffer. Canon would have been smarter to say low capacity like it does in the other manuals.

https://www.fredmiranda.com/forum/topic/1653904/26#15295968




Jul 27, 2020 at 09:12 AM
lighthound
Offline
Details
p.4 #8Canon R5 user manual
Jochenb wrote:
lighthound wroteI keep hearing about this 45mp @ 20fps in ES as being some kind of negative.
So when using silent mode does the camera really keep firing until it reaches 20 frames even though you only pressed the shutter for a fraction of a second?
I ask because I shoot at 10fps in mechanical all the time and when I don't want or need all 10 frames I simply remove my finger from the shutter which is usually 3-5 frames depending on how long I hit that shutter button.
I also do this, but there's a big difference between 10 and 20 fps. That's why I hardly use it on the A9.
You'll end up with so much more files every short burst that you shoot. Not ideal with 45MP files that'll fill up your memory cards quickly.



Yes, the file sizes could become a problem but I've been shooting C-raw for the past year without issue. It saves a ton of disk space and there is no apparent difference in the IQ. None that I can see at least.

---------------------------------------------

Jochenb wrote:
bobbytan wroteI do like the silent mode a lot as shutter noise bothers me - especially when it’s really loud like the 1DX. The mechanical shutter noise of the newer Sony models are okay. So I will be quite disappointed if you cannot use the e-shutter in single mode. I may just have to one-touch or touch-and-release the shutter - but that may still cause the camera to fire a sequence of several shots - and I wouldn’t like that if I am shooting a perched bird.

Zenon Char wrote
lighthound wroteI keep hearing about this 45mp @ 20fps in ES as being some kind of negative.
So when using silent mode does the camera really keep firing until it reaches 20 frames even though you only pressed the shutter for a fraction of a second?
I ask because I shoot at 10fps in mechanical all the time and when I don't want or need all 10 frames I simply remove my finger from the shutter which is usually 3-5 frames depending on how long I hit that shutter button.
That is a good question. It will just keep firing as long as the shutter is pressed. We have seen video on that. Not sure about short bursts. My guess is it stops as soon as you lift you finger. At 1 second I expect you will be getting close to 20 anyway
Oh but you can still use the electronic shutter in single shot mode.
We were talking about burst shooting.



I kind of thought that might be the case but nobody has said so. That's all I need for skittish critters.
Jul 27, 2020 at 09:21 AM
tifa3
Offline
Details
p.4 #9Canon R5 user manual
what's the difference between C-Raw and S/M-Raw? Is it better than those?
Jul 27, 2020 at 09:25 AM
lighthound
Offline
Details
p.4 #10Canon R5 user manual
tifa3 wrote:
what's the difference between C-Raw and S/M-Raw? Is it better than those?


C-Raw is a file compression (CR3) where as S/M-Raw are literally smaller MP image files.
And obviously yes, C-Raw is far better if you want your full MP images but smaller file size with no hit on IQ.
Jul 27, 2020 at 09:41 AM
arbitrage
Offline
Details
p.4 #11Canon R5 user manual
lighthound wrote:
I keep hearing about this 45mp @ 20fps in ES as being some kind of negative.
So when using silent mode does the camera really keep firing until it reaches 20 frames even though you only pressed the shutter for a fraction of a second?
I ask because I shoot at 10fps in mechanical all the time and when I don't want or need all 10 frames I simply remove my finger from the shutter which is usually 3-5 frames depending on how long I hit that shutter button.


No you will certainly be able to say push the button for 1/4 second and get 5 shots or whatever. On the A9 the shutter has a nice enough feel that I can fire single frames off in 20FPS mode if a concentrate a little bit.

But what I've found is in the end, no matter how hard you try, you come back with almost double the frames compared to if you shot in 10FPS mode. And that gets really annoying culling unless I was out shooting something where 20FPS got me the shot. I used to shoot 20FPS all the time because I could...but soon learned that 10 was enough for 90% of the things I shoot. Now 12FPS on the R5 is a nice rate...10-15 would be ideal for me. I just wish I could pick whatever I want like you can on Canon DLSRs. With Sony I only have the choice of 1, 5, 10, 20 (or 12 if I shoot uncompressed RAW) but being forced into 20FPS in ES is not something I'm a fan of. Regardless, 20FPS may induce distortion for fast moving objects anyways so then I may tend to shoot ES in Single shot and just tap the shutter up and down as fast as I need for subjects where I don't care about distortion (large majority).
Jul 27, 2020 at 03:44 PM
bobbytan
Offline
Details
p.4 #12Canon R5 user manual
Oh goody! Now hopefully the shutter button is sensitive enough so just a gentle touch-and-release on the shutter button will fire off approx 10 fps instead of 20 fps.

Jochenb wrote:
bobbytan wroteI do like the silent mode a lot as shutter noise bothers me - especially when it’s really loud like the 1DX. The mechanical shutter noise of the newer Sony models are okay. So I will be quite disappointed if you cannot use the e-shutter in single mode. I may just have to one-touch or touch-and-release the shutter - but that may still cause the camera to fire a sequence of several shots - and I wouldn’t like that if I am shooting a perched bird.

Zenon Char wrote
lighthound wroteI keep hearing about this 45mp @ 20fps in ES as being some kind of negative.
So when using silent mode does the camera really keep firing until it reaches 20 frames even though you only pressed the shutter for a fraction of a second?
I ask because I shoot at 10fps in mechanical all the time and when I don't want or need all 10 frames I simply remove my finger from the shutter which is usually 3-5 frames depending on how long I hit that shutter button.
That is a good question. It will just keep firing as long as the shutter is pressed. We have seen video on that. Not sure about short bursts. My guess is it stops as soon as you lift you finger. At 1 second I expect you will be getting close to 20 anyway
Oh but you can still use the electronic shutter in single shot mode.
We were talking about burst shooting.



Jul 27, 2020 at 03:52 PM
cogden
Offline
Details
p.4 #13Canon R5 user manual
Any info in the non-English manuals about tying spot metering to spot focus point?
Had that in 1DS bodies, but not in 5DSRs. Would love to get that back!

Also, too bad Focus Bracketing (stacking) doesn't allow one to set "near" and "far" points (saved bt. sets) and then auto-calc the # of frames. I wonder if HeliconRemote, Cascable, CamRanger2, etc. will work with the R5 to achieve that usable Focus Stacking?
Jul 27, 2020 at 09:06 PM
Zenon Char
Offline
Details
p.4 #14Canon R5 user manual
Has anyone tried this? Canon USA site. Go to the R5 page and click on resources and then click here. The R6 should have the same. Clarity is new. They both have Spot Focus.

https://www.usa.canon.com/internet/portal/us/home/products/details/cameras/eos-dslr-and-mirrorless-cameras/mirrorless/eos-r5









Jul 27, 2020 at 10:29 PM
melcat
Offline
Details
p.4 #15Canon R5 user manual
cogden wrote:
Any info in the non-English manuals about tying spot metering to spot focus point?


From the German version, I don’t think it has it. As well as reading the relevant sections, I searched for "Spot" and "Spotmessung" so I think that covers it.

Independent of language, the manual is huge (938 pages) and poorly organised.
Jul 27, 2020 at 11:44 PM
Pius Sullivan
★ Featured Winner
Offline
Details
Jul 27, 2020 at 11:58 PM
photoin.nyc
Offline
Details
p.4 #17Canon R5 user manual
Pius Sullivan wrote:
https://downloads.canon.com/nw/camera/products/eos/product-1/pdfs/EOSR5_specifications-7-27-2020.pdf


That's the spec list, not the manual thought.
Jul 28, 2020 at 12:41 AM
koenkooi
Offline
Details
p.4 #18Canon R5 user manual
cogden wrote:
Any info in the non-English manuals about tying spot metering to spot focus point?
Had that in 1DS bodies, but not in 5DSRs. Would love to get that back!

Also, too bad Focus Bracketing (stacking) doesn't allow one to set "near" and "far" points (saved bt. sets) and then auto-calc the # of frames. I wonder if HeliconRemote, Cascable, CamRanger2, etc. will work with the R5 to achieve that usable Focus Stacking?


The recent mirrorless body from Canon heavily weight the exposure towards the selected AF point with evaluative metering. Not as heavily as on linked spot metering on a 1 series, but it does a pretty good job for my use case (my kids running around in front of backlit windows).
Jul 28, 2020 at 01:51 AM
Tom_W
Offline
Details
Jul 28, 2020 at 09:54 AM
Zenon Char
Offline
Details
p.4 #20Canon R5 user manual
Jul 28, 2020 at 09:55 AM
FM ForumsCanon ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister