fredmiranda.com Login
This topic is in the 2020 archive. You can read it and like its posts here. It is read only.

Archive 2020Milk Way rises over Corkscrew Gulch, San Juan County, CO

  
 
bmike-vt
Offline
Details
p.2 #1Milk Way rises over Corkscrew Gulch, San Juan County, CO
Jeff wrote:
bmike-vt wroteVery nice, and I like your choice in processing.

No tracking? Are you stacking at all? I'd be curious what the noise looks like with that camera. I haven't done a MW pano with my 6d Mk2, but did a few with the EOS M6 - using the 22 EFM and the Sigma Art 1.4 - I used the RRS pano gimble atop a tracker - did 2-4 shots tracked, then stacked, then stitched. ~8-12 camera positions.

I wish I had done more research - but I got the RRS setup primarily for landscape and architectural stitching before I starting making images at night. Having an indexed head would be a huge time saver and make things so much simpler... in daylight the RRS is not so bad, so long as you stick to your notes and don't forget where you left off... but at night its a challenge.
Here you go, 1:1 crop, first image below. Note the (subtle) star effect around Jupiter, even at f/1.8; I'm a huge fan of this lens.

Second image is upper-left corner at f/1.4, third image is upper-right corner of same image; virtually no coma (a tiny bit on right side, but for f/1.4, this result is one to two orders of magnitude better than any other lens I've used). Really, the vignetting is the limiting factor using this lens at night (pretty similar to that of Sigma Art 35/1.4.

I know you asked about the sensor noise, not the lens, but the
...Show more →

Thanks. That lens does look great. I have a fleet of Sigma lenses... from the 20mm through 85mm and then the trio of zooms. I'm going to pick up another body at some point - I might have a look at the 5Ds. I do a fair amount of stitching now with the 6d2 to get more resolution. My largest MW panos have been in the 6kx9k (final crop) range, my largest was a daytime shot of the Matterhorn @ 15kx15k (final crop). I am going to wait to see if they come out with one more body in the 5/6 series and then pick up stuff on sale if they don't release any suitable successors. I have too much invested in glass to switch right now... unless I go the adapter route.
Jul 16, 2020 at 02:11 AM
otisjackson
Offline
Details
p.2 #2Milk Way rises over Corkscrew Gulch, San Juan County, CO
Absolutely sublime shot, and learning a lot from this thread. Thanks!
Jul 16, 2020 at 07:45 AM
rstoddard11
Offline
Details
p.2 #3Milk Way rises over Corkscrew Gulch, San Juan County, CO
Great shot. I am finding that the panorama approach looks way better than trying to “fit it all in” with a 14mm lens and having to deal with funhouse mirror distortion.
Aug 02, 2020 at 11:47 AM
Bigdipper
Offline
Details
p.2 #4Milk Way rises over Corkscrew Gulch, San Juan County, CO
Gorgeous scene with great composition!
Aug 02, 2020 at 08:33 PM
rwolson
Offline
Details
p.2 #5Milk Way rises over Corkscrew Gulch, San Juan County, CO
Well done!
Aug 03, 2020 at 01:01 PM
rstoddard11
Offline
Details
p.2 #6Milk Way rises over Corkscrew Gulch, San Juan County, CO
Any suggestions on software for stitching? I’m still paying $0 annually to run Lightroom 5, but would be happy downsizing the files to JPEGs and then combining as I am probably not printing large or selling, if that would help things run smoother on that version for editing.
Aug 03, 2020 at 10:48 PM
Jeff
Offline
Details
p.2 #7Milk Way rises over Corkscrew Gulch, San Juan County, CO
rstoddard11 wrote:
Any suggestions on software for stitching? I’m still paying $0 annually to run Lightroom 5, but would be happy downsizing the files to JPEGs and then combining as I am probably not printing large or selling, if that would help things run smoother on that version for editing.


I do use LR and PS when they will accomplish the stitch, but when they fail (for often unknown reasons), I use PTGui.
Aug 03, 2020 at 11:06 PM
Jeff
Offline
Details
p.2 #8Milk Way rises over Corkscrew Gulch, San Juan County, CO
rstoddard11 wrote:
Great shot. I am finding that the panorama approach looks way better than trying to “fit it all in” with a 14mm lens and having to deal with funhouse mirror distortion.


It can work better for sure, though it is a lot more work, especially when the sky or light is rapidly changing. It can also be very limiting, as you cannot just flip the camera a different direction to capture something interesting other than the pano.

Sure does make for great large prints!

Glad you enjoyed...
Aug 04, 2020 at 12:23 PM
Jeff
Offline
Details
p.2 #9Milk Way rises over Corkscrew Gulch, San Juan County, CO
bmike-vt wrote:
Thanks. That lens does look great. I have a fleet of Sigma lenses... from the 20mm through 85mm and then the trio of zooms. I'm going to pick up another body at some point - I might have a look at the 5Ds. I do a fair amount of stitching now with the 6d2 to get more resolution. My largest MW panos have been in the 6kx9k (final crop) range, my largest was a daytime shot of the Matterhorn @ 15kx15k (final crop). I am going to wait to see if they come out with one more body in the
...Show more →

I think we probably have our answer with the R5 being released. I guess as long as the adapter approach works seamlessly I'm OK with it, but I sure would like a true 5Ds successor.
Aug 04, 2020 at 12:36 PM
FM ForumsLandscape PhotographyJoin Upload & Sell
  
 

You are not logged inLog inRegister