Steve Spencer wrote: realVivek wroteI know. I used to shoot with Ektar 25 and still have a few bricks.
This is different.
retrofocus wroterealVivek wroteDo not forget the 1/1000s cloth shutter.
It is a nice idea but is not really practical.I shoot a lot of film, and honestly the limit with 1/1000 sec doesn't bother me. I reached it when shooting wide open with my f/1.5 lens, but I normally use slower ISO film in the first place. On my medium format cameras I am even more limited to 1/500 sec - also fine for me.You could always use an ND filter too. I think if one opted for this sort of camera you might need a work around on a number of issues. Certainly the max shutter speed would be one of them, but doesn't seem like a deal breaker if you are really interested in this camera.
I would imagine that at some people who opt for this mod would also opt to include a modified sensor with a thin sensor stack as well. Seems like an obvious move and wouldn't add that much to the cost considering the work that would be required anyway. ...Show more →
Cost is a very good point to raise in this discussion. I have no idea how much this "conversion" with M3 and A7(R) would cost if done externally assuming you send in both cameras. Another advantage I like in the described approach is that you can still use the M3 either with film or with Sony sensor after this conversion. I also agree that at this point it is better to have the Sony A7-sensor modified and optimized for rangefinder lens usage.
All together the cost will likely be significantly lower than buying a Leica M10 or M10R.
I crunched some numbers conservatively:
Leica M3 used: $1000
Leica A7R used: $600
Sony sensor modification: $400 (Kolari website)
Adapting A7(R) camera to M3: est. $500
Without shipping and taxes something around $2500. If a company like Kolari would offer this modification, I might go for it to be honest as long I can switch easily between film and digital on my M3.
retrofocus wrote: Steve Spencer wroterealVivek wroteI know. I used to shoot with Ektar 25 and still have a few bricks.
This is different.
retrofocus wroterealVivek wroteDo not forget the 1/1000s cloth shutter.
It is a nice idea but is not really practical.I shoot a lot of film, and honestly the limit with 1/1000 sec doesn't bother me. I reached it when shooting wide open with my f/1.5 lens, but I normally use slower ISO film in the first place. On my medium format cameras I am even more limited to 1/500 sec - also fine for me.You could always use an ND filter too. I think if one opted for this sort of camera you might need a work around on a number of issues. Certainly the max shutter speed would be one of them, but doesn't seem like a deal breaker if you are really interested in this camera.
I would imagine that at some people who opt for this mod would also opt to include a modified sensor with a thin sensor stack as well. Seems like an obvious move and wouldn't add that much to the cost considering the work that would be required anyway.Cost is a very good point to raise in this discussion. I have no idea how much this "conversion" with M3 and A7(R) would cost if done externally assuming you send in both cameras. Another advantage I like in the described approach is that you can still use the M3 either with film or with Sony sensor after this conversion. I also agree that at this point it is better to have the Sony A7-sensor modified and optimized for rangefinder lens usage.
All together the cost will likely be significantly lower than buying a Leica M10 or M10R.
I crunched some numbers conservatively:
Leica M3 used: $1000
Leica A7R used: $600
Sony sensor modification: $400 (Kolari website)
Adapting A7(R) camera to M3: est. $500
Without shipping and taxes something around $2500. If a company like Kolari would offer this modification, I might go for it to be honest as long I can switch easily between film and digital on my M3. ...Show more →
After reading the website, you can't switch back and forth with the full-frame. Too much of the actual camera had to be replaced. NEX, yes. A7, no. It is a new camera essentially.
The full frame version seems like it pretty much is a new camera. It seems to me that this guy, by himself, in his spare time, did what Epson did with the RD1 and Zeiss couldn’t do.
I’d bet you could bulk buy the components from Sony, maybe even a newer sensor with IBIS. Stop parting out M3s and just get Cosina to make a new ikon rangefinder- which seems to be the major part of the M3 carried over.
anselwannab wrote:
I’d bet you could bulk buy the components from Sony, maybe even a newer sensor with IBIS. Stop parting out M3s and just get Cosina to make a new ikon rangefinder- which seems to be the major part of the M3 carried over.
joelRichards wrote: retrofocus wroteSteve Spencer wroterealVivek wroteI know. I used to shoot with Ektar 25 and still have a few bricks.
This is different.
retrofocus wroterealVivek wroteDo not forget the 1/1000s cloth shutter.
It is a nice idea but is not really practical.I shoot a lot of film, and honestly the limit with 1/1000 sec doesn't bother me. I reached it when shooting wide open with my f/1.5 lens, but I normally use slower ISO film in the first place. On my medium format cameras I am even more limited to 1/500 sec - also fine for me.You could always use an ND filter too. I think if one opted for this sort of camera you might need a work around on a number of issues. Certainly the max shutter speed would be one of them, but doesn't seem like a deal breaker if you are really interested in this camera.
I would imagine that at some people who opt for this mod would also opt to include a modified sensor with a thin sensor stack as well. Seems like an obvious move and wouldn't add that much to the cost considering the work that would be required anyway.Cost is a very good point to raise in this discussion. I have no idea how much this "conversion" with M3 and A7(R) would cost if done externally assuming you send in both cameras. Another advantage I like in the described approach is that you can still use the M3 either with film or with Sony sensor after this conversion. I also agree that at this point it is better to have the Sony A7-sensor modified and optimized for rangefinder lens usage.
All together the cost will likely be significantly lower than buying a Leica M10 or M10R.
I crunched some numbers conservatively:
Leica M3 used: $1000
Leica A7R used: $600
Sony sensor modification: $400 (Kolari website)
Adapting A7(R) camera to M3: est. $500
Without shipping and taxes something around $2500. If a company like Kolari would offer this modification, I might go for it to be honest as long I can switch easily between film and digital on my M3.After reading the website, you can't switch back and forth with the full-frame. Too much of the actual camera had to be replaced. NEX, yes. A7, no. It is a new camera essentially.
Thanks for the clarification, this wasn't clear to me when I screened the description. Then it's not something I would do to be honest. Not gonna sacrifice my M3
realVivek wrote:
IBIS unit alone would make it twice as thick.
anselwannab wroteI’d bet you could bulk buy the components from Sony, maybe even a newer sensor with IBIS. Stop parting out M3s and just get Cosina to make a new ikon rangefinder- which seems to be the major part of the M3 carried over.
Not really. Look at an A7 to A7II body, slightly thicker, but the body isn't double. If you are no keeping the M3 shutter, you have the ability to keep body thickness down. I'd have to see the 3D files to see how much room there is and where. I reached out to the guy, but haven't heard back.
I actually looked at both the A7’s and A7II’ s sensors* (with IBIS) before I posted.
anselwannab wrote: realVivek wroteIBIS unit alone would make it twice as thick.
anselwannab wroteI’d bet you could bulk buy the components from Sony, maybe even a newer sensor with IBIS. Stop parting out M3s and just get Cosina to make a new ikon rangefinder- which seems to be the major part of the M3 carried over.Not really. Look at an A7 to A7II body, slightly thicker, but the body isn't double. If you are no keeping the M3 shutter, you have the ability to keep body thickness down. I'd have to see the 3D files to see how much room there is and where. I reached out to the guy, but haven't heard back.