fredmiranda.com Login

Light Lens Lab (LLL) replica lenses discussion & image thread

  
 
highdesertmesa
Offline
Details
p.75 #1Light Lens Lab (LLL) replica lenses discussion & image thread


Sonnar-7 wrote:
highdesertmesa wrote
Sonnar-7 wroteI removed the built-in UV filter of my Speed Panchro II on a whim and I don’t know if it’s wishful thinking but I feel the flares are prettier than before, more artefact like and less veil-ish.
Now I’m looking for a good 43mm UV filter, they are scarce.
Yeah that built in UV in the SPII is not great. Took mine out and never looked back. I'm using the Leica UV on my SPII because I already had it for another Leica lens that's since been sold. I also like the Zeiss UV filters. I know a lot of folks like the B+W, but I don't like their MRC Nano Clear filters. Their nano coating work really well at repelling water and cleans the easiest, but I've seen slight infinity corner sharpness reduction with them on some lenses (probably irrelevant on a vintage lens design like he SPII).

B&H has a ton of 43mm UV filters.
Most of the uv filters made even by big brands, are in super lightweight aluminium, slim and with knuckles and some green coating that cast some cold colors. I really don’t like those and it’s all I can usually find, it’s said to be to our benefit but the aluminium is unpleasant to the touch and scratch the threads, the knuckles are usually poorly thought out and prevent any bayonet accessory and when I use a vintage lens I prefer a warm cast. I don’t know, I miss old school filters.
I found a few brands like Nisi that make some
...Show more →

B+W, Heliopan, and Breakthrough are all brass. Never noticed any tint imparted to the images from UV or clear from the major brands.
May 08, 2025 at 06:37 AM
mgibo
Offline
Details
p.75 #2Light Lens Lab (LLL) replica lenses discussion & image thread

Sonnar-7 wrote:
Oh man I’m envious. Does it flare?
Love your M9 photos, that camera is still going strong by daylight.


I got really lucky. They had only 5 available and it was at a special price for the event.

I didn't have a lot of time to shoot with it and I didn’t shoot it into direct light, but it was still a sunny day and I didn’t notice any. The front element is a little recessed so I think it helps a little with flare, kind of like a hood.

Thank you! I love my M9 and the colors it produces.
May 08, 2025 at 08:28 AM
Adamwilbert
Offline
Details
p.75 #3Light Lens Lab (LLL) replica lenses discussion & image thread
highdesertmesa wrote:
Sonnar-7 wrote
highdesertmesa wrote
Sonnar-7 wroteI removed the built-in UV filter of my Speed Panchro II on a whim and I don’t know if it’s wishful thinking but I feel the flares are prettier than before, more artefact like and less veil-ish.
Now I’m looking for a good 43mm UV filter, they are scarce.
Yeah that built in UV in the SPII is not great. Took mine out and never looked back. I'm using the Leica UV on my SPII because I already had it for another Leica lens that's since been sold. I also like the Zeiss UV filters. I know a lot of folks like the B+W, but I don't like their MRC Nano Clear filters. Their nano coating work really well at repelling water and cleans the easiest, but I've seen slight infinity corner sharpness reduction with them on some lenses (probably irrelevant on a vintage lens design like he SPII).

B&H has a ton of 43mm UV filters.
Most of the uv filters made even by big brands, are in super lightweight aluminium, slim and with knuckles and some green coating that cast some cold colors. I really don’t like those and it’s all I can usually find, it’s said to be to our benefit but the aluminium is unpleasant to the touch and scratch the threads, the knuckles are usually poorly thought out and prevent any bayonet accessory and when I use a vintage lens I prefer a warm cast. I don’t know, I miss old school filters.
I found a few brands like Nisi that make some brass more consistent uv filter with warm coating but they are not always easy to find here or some sizes are missing.

On another note, I’m pretty sure the LLL UV filter of the SPii is single coated if anything.

I’m not sure it improved to remove it, I didn’t tested enough by comparison but I felt it was better without.
B+W, Heliopan, and Breakthrough are all brass. Never noticed any tint imparted to the images from UV or clear from the major brands.


Only the more expensive breakthrough filters are brass, learned that the hard way
May 08, 2025 at 08:38 AM
highdesertmesa
Offline
Details
p.75 #4Light Lens Lab (LLL) replica lenses discussion & image thread
Adamwilbert wrote:
highdesertmesa wrote
Sonnar-7 wrote
highdesertmesa wrote
Sonnar-7 wroteI removed the built-in UV filter of my Speed Panchro II on a whim and I don’t know if it’s wishful thinking but I feel the flares are prettier than before, more artefact like and less veil-ish.
Now I’m looking for a good 43mm UV filter, they are scarce.
Yeah that built in UV in the SPII is not great. Took mine out and never looked back. I'm using the Leica UV on my SPII because I already had it for another Leica lens that's since been sold. I also like the Zeiss UV filters. I know a lot of folks like the B+W, but I don't like their MRC Nano Clear filters. Their nano coating work really well at repelling water and cleans the easiest, but I've seen slight infinity corner sharpness reduction with them on some lenses (probably irrelevant on a vintage lens design like he SPII).

B&H has a ton of 43mm UV filters.
Most of the uv filters made even by big brands, are in super lightweight aluminium, slim and with knuckles and some green coating that cast some cold colors. I really don’t like those and it’s all I can usually find, it’s said to be to our benefit but the aluminium is unpleasant to the touch and scratch the threads, the knuckles are usually poorly thought out and prevent any bayonet accessory and when I use a vintage lens I prefer a warm cast. I don’t know, I miss old school filters.
I found a few brands like Nisi that make some brass more consistent uv filter with warm coating but they are not always easy to find here or some sizes are missing.

On another note, I’m pretty sure the LLL UV filter of the SPii is single coated if anything.

I’m not sure it improved to remove it, I didn’t tested enough by comparison but I felt it was better without.
B+W, Heliopan, and Breakthrough are all brass. Never noticed any tint imparted to the images from UV or clear from the major brands.
Only the more expensive breakthrough filters are brass, learned that the hard way


I have to ask – did you order it straight from Breakthrough off their website? The ones on Amazon are all fake.
May 08, 2025 at 08:45 AM
Nick YR
Offline
Details
p.75 #5Light Lens Lab (LLL) replica lenses discussion & image thread
Very nice!

It does look a bit big though, do you know what is its diameter and length?

mgibo wrote:
I was fortunate enough to pick up a limited early release of the LLL 50mm f1.5 Z21 at a camera event in Japan today. This is my first lens from Light Lens Lab. My first impressions of the lens are that it is a lot lighter than I expected. Although it is a little front heavy mounted on my M9-P. The aperture ring is really smooth and the focus ring is a little bit more stiff compared to the aperture ring. Focusing is really easy and accurate with my M9. I know it’s not for everyone but I really like
...Show more →
May 08, 2025 at 09:00 AM
Adamwilbert
Offline
Details
p.75 #6Light Lens Lab (LLL) replica lenses discussion & image thread
highdesertmesa wrote:
Adamwilbert wrote
highdesertmesa wrote
Sonnar-7 wrote
highdesertmesa wrote
Sonnar-7 wroteI removed the built-in UV filter of my Speed Panchro II on a whim and I don’t know if it’s wishful thinking but I feel the flares are prettier than before, more artefact like and less veil-ish.
Now I’m looking for a good 43mm UV filter, they are scarce.
Yeah that built in UV in the SPII is not great. Took mine out and never looked back. I'm using the Leica UV on my SPII because I already had it for another Leica lens that's since been sold. I also like the Zeiss UV filters. I know a lot of folks like the B+W, but I don't like their MRC Nano Clear filters. Their nano coating work really well at repelling water and cleans the easiest, but I've seen slight infinity corner sharpness reduction with them on some lenses (probably irrelevant on a vintage lens design like he SPII).

B&H has a ton of 43mm UV filters.
Most of the uv filters made even by big brands, are in super lightweight aluminium, slim and with knuckles and some green coating that cast some cold colors. I really don’t like those and it’s all I can usually find, it’s said to be to our benefit but the aluminium is unpleasant to the touch and scratch the threads, the knuckles are usually poorly thought out and prevent any bayonet accessory and when I use a vintage lens I prefer a warm cast. I don’t know, I miss old school filters.
I found a few brands like Nisi that make some brass more consistent uv filter with warm coating but they are not always easy to find here or some sizes are missing.

On another note, I’m pretty sure the LLL UV filter of the SPii is single coated if anything.

I’m not sure it improved to remove it, I didn’t tested enough by comparison but I felt it was better without.
B+W, Heliopan, and Breakthrough are all brass. Never noticed any tint imparted to the images from UV or clear from the major brands.
Only the more expensive breakthrough filters are brass, learned that the hard way
I have to ask – did you order it straight from Breakthrough off their website? The ones on Amazon are all fake.



X2

H-K9L/AGC optical glass manufactured in Japan
8 layers of multi-coating—4 per side
Aluminum threading
3.5mm deep

X4

Shott B270 glass manufactured in Germany
16 layers of multi-coating—8 per side
Brass threading
3.1mm deep


Their official store on amazon is fake? Including the serial number which they approved for my warranty after I registered it? Not saying you're wrong, I would just be quite surprised.
May 08, 2025 at 10:51 AM
tommmi
Offline
Details
p.75 #7Light Lens Lab (LLL) replica lenses discussion & image thread
mgibo wrote:
I was fortunate enough to pick up a limited early release of the LLL 50mm f1.5 Z21 at a camera event in Japan today.


I. am. jealous.

I've been waiting for that lens since the day I heard about it. I have always wanted to have Angenieux 50mm S21 but they are so ridiculously expensive not to mention they are almost impossible to find on the second hand market.

The official release day will be soon though

Has the price or price range estimate been announced yet?
May 08, 2025 at 11:11 AM
highdesertmesa
Offline
Details
p.75 #8Light Lens Lab (LLL) replica lenses discussion & image thread
Adamwilbert wrote:
highdesertmesa wrote
Adamwilbert wrote
highdesertmesa wrote
Sonnar-7 wrote
highdesertmesa wroteYeah that built in UV in the SPII is not great. Took mine out and never looked back. I'm using the Leica UV on my SPII because I already had it for another Leica lens that's since been sold. I also like the Zeiss UV filters. I know a lot of folks like the B+W, but I don't like their MRC Nano Clear filters. Their nano coating work really well at repelling water and cleans the easiest, but I've seen slight infinity corner sharpness reduction with them on some lenses (probably irrelevant on a vintage lens design like he SPII).

B&H has a ton of 43mm UV filters.
Most of the uv filters made even by big brands, are in super lightweight aluminium, slim and with knuckles and some green coating that cast some cold colors. I really don’t like those and it’s all I can usually find, it’s said to be to our benefit but the aluminium is unpleasant to the touch and scratch the threads, the knuckles are usually poorly thought out and prevent any bayonet accessory and when I use a vintage lens I prefer a warm cast. I don’t know, I miss old school filters.
I found a few brands like Nisi that make some brass more consistent uv filter with warm coating but they are not always easy to find here or some sizes are missing.

On another note, I’m pretty sure the LLL UV filter of the SPii is single coated if anything.

I’m not sure it improved to remove it, I didn’t tested enough by comparison but I felt it was better without.
B+W, Heliopan, and Breakthrough are all brass. Never noticed any tint imparted to the images from UV or clear from the major brands.
Only the more expensive breakthrough filters are brass, learned that the hard way
I have to ask – did you order it straight from Breakthrough off their website? The ones on Amazon are all fake.
X2

H-K9L/AGC optical glass manufactured in Japan
8 layers of multi-coating—4 per side
Aluminum threading
3.5mm deep

X4

Shott B270 glass manufactured in Germany
16 layers of multi-coating—8 per side
Brass threading
3.1mm deep

Their official store on amazon is fake? Including the serial number which they approved for my warranty after I registered it? Not saying you're wrong, I would just be quite surprised.


There are organized efforts to swap out real products from Amazon with fake products then return them. I received two Breakthrough filters in a row from Amazon that I assume someone had swapped the filters out for generic ones without markings. I don't think Breakthrough checks the serial numbers via a database when you register it, but they might if you send it in under a warranty claim. You could always call them to be sure. Just not work the hassle to me to get a box of rocks from Amazon instead of what I ordered. So maybe not all of them are fake, but enough are that it's not worth it, at least for me.
May 08, 2025 at 01:32 PM
Adamwilbert
Offline
Details
p.75 #9Light Lens Lab (LLL) replica lenses discussion & image thread


highdesertmesa wrote:
Adamwilbert wrote
highdesertmesa wrote
Adamwilbert wrote
highdesertmesa wrote
Sonnar-7 wroteMost of the uv filters made even by big brands, are in super lightweight aluminium, slim and with knuckles and some green coating that cast some cold colors. I really don’t like those and it’s all I can usually find, it’s said to be to our benefit but the aluminium is unpleasant to the touch and scratch the threads, the knuckles are usually poorly thought out and prevent any bayonet accessory and when I use a vintage lens I prefer a warm cast. I don’t know, I miss old school filters.
I found a few brands like Nisi that make some brass more consistent uv filter with warm coating but they are not always easy to find here or some sizes are missing.

On another note, I’m pretty sure the LLL UV filter of the SPii is single coated if anything.

I’m not sure it improved to remove it, I didn’t tested enough by comparison but I felt it was better without.
B+W, Heliopan, and Breakthrough are all brass. Never noticed any tint imparted to the images from UV or clear from the major brands.
Only the more expensive breakthrough filters are brass, learned that the hard way
I have to ask – did you order it straight from Breakthrough off their website? The ones on Amazon are all fake.
X2

H-K9L/AGC optical glass manufactured in Japan
8 layers of multi-coating—4 per side
Aluminum threading
3.5mm deep

X4

Shott B270 glass manufactured in Germany
16 layers of multi-coating—8 per side
Brass threading
3.1mm deep

Their official store on amazon is fake? Including the serial number which they approved for my warranty after I registered it? Not saying you're wrong, I would just be quite surprised.
There are organized efforts to swap out real products from Amazon with fake products then return them. I received two Breakthrough filters in a row from Amazon that I assume someone had swapped the filters out for generic ones without markings. I don't think Breakthrough checks the serial numbers via a database when you register it, but they might if you send it in under a warranty claim. You could always call them to be sure. Just not work the hassle to me to get a box of rocks from Amazon instead of what I ordered. So maybe not all
...Show more →

Either way the X2s are aluminum though right?
May 08, 2025 at 01:43 PM
highdesertmesa
Offline
Details
p.75 #10Light Lens Lab (LLL) replica lenses discussion & image thread
Fred Miranda wrote:
highdesertmesa wrote
Sonnar-7 wroteI removed the built-in UV filter of my Speed Panchro II on a whim and I don’t know if it’s wishful thinking but I feel the flares are prettier than before, more artefact like and less veil-ish.
Now I’m looking for a good 43mm UV filter, they are scarce.
Yeah that built in UV in the SPII is not great. Took mine out and never looked back. I'm using the Leica UV on my SPII because I already had it for another Leica lens that's since been sold. I also like the Zeiss UV filters. I know a lot of folks like the B+W, but I don't like their MRC Nano Clear filters. Their nano coating work really well at repelling water and cleans the easiest, but I've seen slight infinity corner sharpness reduction with them on some lenses (probably irrelevant on a vintage lens design like he SPII).

B&H has a ton of 43mm UV filters.
I don't doubt what you're saying, but did you do a side by side comparison? Maybe one shot with the filter and one without? It's possible the filter that comes with the SPII is single coated.


Did a bit of testing today on the 8-element separate filter that they include with the safari edition. I assume its quality/build is the same for all of their stand-alone UV filters but perhaps not the built-in filters. I wasn't up to trying to test the actual SPII built-in filter since it's a pain to install and remove.

Results on the M11M (which makes it impossible to see color errors of course) showed that it takes 400% magnification to see any meaningful impact from the UV filter, whether that be at the center or the corner. The impact I saw before to the corners could have been related to color error and/or it could be that the thicker sensor stack of the SL2-S and S5IIX is more sensitive to having another layer of glass over the lens. Probably the latter.

Regarding flare shape and intensity – identical with/without the UV filter. However, flare definition was noticeably stronger with the UV filter and more diffuse without it. I'm not sure if this is due to a defect introduced by the UV filter or is due to a slight increase in contrast from filtering UV light on the Monochrome camera. I'm leaning toward the latter.
May 08, 2025 at 01:50 PM
 


Search in Used Dept. 

highdesertmesa
Offline
Details
p.75 #11Light Lens Lab (LLL) replica lenses discussion & image thread
Adamwilbert wrote:
highdesertmesa wrote
Adamwilbert wrote
highdesertmesa wrote
Adamwilbert wrote
highdesertmesa wroteB+W, Heliopan, and Breakthrough are all brass. Never noticed any tint imparted to the images from UV or clear from the major brands.
Only the more expensive breakthrough filters are brass, learned that the hard way
I have to ask – did you order it straight from Breakthrough off their website? The ones on Amazon are all fake.
X2

H-K9L/AGC optical glass manufactured in Japan
8 layers of multi-coating—4 per side
Aluminum threading
3.5mm deep

X4

Shott B270 glass manufactured in Germany
16 layers of multi-coating—8 per side
Brass threading
3.1mm deep

Their official store on amazon is fake? Including the serial number which they approved for my warranty after I registered it? Not saying you're wrong, I would just be quite surprised.
There are organized efforts to swap out real products from Amazon with fake products then return them. I received two Breakthrough filters in a row from Amazon that I assume someone had swapped the filters out for generic ones without markings. I don't think Breakthrough checks the serial numbers via a database when you register it, but they might if you send it in under a warranty claim. You could always call them to be sure. Just not work the hassle to me to get a box of rocks from Amazon instead of what I ordered. So maybe not all of them are fake, but enough are that it's not worth it, at least for me.
Either way the X2s are aluminum though right?


If that's what Breakthrough says. I wonder if they've always been that way or if they just moved to aluminum on the X2 after they introduced the X4. I think all of mine are X4, but I might have an old X2 that I could have sworn was brass – I'll have to double check and get back to you.
May 08, 2025 at 01:54 PM
mgibo
Offline
Details
p.75 #12Light Lens Lab (LLL) replica lenses discussion & image thread
Nick YR wrote:
Very nice!

It does look a bit big though, do you know what is its diameter and length?


Here are the specs as written in the manual.





Edited on May 08, 2025 at 06:03 PM · View previous versions
May 08, 2025 at 05:56 PM
mgibo
Offline
Details
p.75 #13Light Lens Lab (LLL) replica lenses discussion & image thread
tommmi wrote:
I. am. jealous.

I've been waiting for that lens since the day I heard about it. I have always wanted to have Angenieux 50mm S21 but they are so ridiculously expensive not to mention they are almost impossible to find on the second hand market.

The official release day will be soon though

Has the price or price range estimate been announced yet?


Same here. Ever since I heard about it I’ve been following closely with the news about this lens. Got to play with it a few at various events here and finally picked one up yesterday.

I don’t know what the official price is but I paid 149,000 yen about 1000 usd. I’m not sure what it would be like in the US with all tariffs though.
May 08, 2025 at 06:01 PM
Fred Miranda
Offline
Admin
Upload & Sell: On
Details
p.75 #14Light Lens Lab (LLL) replica lenses discussion & image thread
mgibo wrote:
I was fortunate enough to pick up a limited early release of the LLL 50mm f1.5 Z21 at a camera event in Japan today. This is my first lens from Light Lens Lab. My first impressions of the lens are that it is a lot lighter than I expected. Although it is a little front heavy mounted on my M9-P. The aperture ring is really smooth and the focus ring is a little bit more stiff compared to the aperture ring. Focusing is really easy and accurate with my M9. I know it’s not for everyone but I really like
...Show more →

It has a similar vibe to the Light Lens Lab 50/2 SP2 but with more noticeable optical vignetting, creating more swirl. The bokeh balls on the SP2 are rounder toward the edges. I'm seeing a similar amount of outlining. I wonder if a side-by-side comparison will pop up soon.
May 08, 2025 at 07:25 PM
LightLensLab
Offline
Details
p.75 #15Light Lens Lab (LLL) replica lenses discussion & image thread
mgibo wrote:
I was fortunate enough to pick up a limited early release of the LLL 50mm f1.5 Z21 at a camera event in Japan today. This is my first lens from Light Lens Lab. My first impressions of the lens are that it is a lot lighter than I expected. Although it is a little front heavy mounted on my M9-P. The aperture ring is really smooth and the focus ring is a little bit more stiff compared to the aperture ring. Focusing is really easy and accurate with my M9. I know it’s not for everyone but I really like
...Show more →

Someone got the copy!

As per our announcement states, announcement on pricing and availability on May 21st (like 5/21 hehe).

May 08, 2025 at 09:37 PM
therremans
Offline
Details
p.75 #16Light Lens Lab (LLL) replica lenses discussion & image thread
I brought my 35mm 8E to shoot a band, I feel that it performed well and the glow SOOC aids in character.








https://flic.kr/s/aHBqjCdM7w
May 11, 2025 at 03:08 PM
LightLensLab
Offline
Details
p.75 #17Light Lens Lab (LLL) replica lenses discussion & image thread
May 16, 2025 at 09:39 AM
Fred Miranda
Offline
Admin
Upload & Sell: On
Details
p.75 #18Light Lens Lab (LLL) replica lenses discussion & image thread
Nick YR wrote:
Very nice!

It does look a bit big though, do you know what is its diameter and length?

mgibo wroteI was fortunate enough to pick up a limited early release of the LLL 50mm f1.5 Z21 at a camera event in Japan today. This is my first lens from Light Lens Lab. My first impressions of the lens are that it is a lot lighter than I expected. Although it is a little front heavy mounted on my M9-P. The aperture ring is really smooth and the focus ring is a little bit more stiff compared to the aperture ring. Focusing is really easy and accurate with my M9. I know it’s not for everyone but I really like the character of this lense in the way it swirls. There is a bit of glow and purple fringing but I still really like it. The only thing I don’t like so far is the cap. It’s nice that it’s metal, but it’s a screw on type so it’s a pain to put on and take off.

I will attach a few photos I took around a park.
This is my first time uploading photos so I hope it works.
Excluding the first photo all of these are shot wide open at 1.5 with a Leica M9. JPEGs are SOOC.
According to the specs, the Z21 is just 3mm longer than the LLL 50mm f/2 SP2, and it's also slightly lighter at 313g compared to 349g. So overall, very similar in size and weight. However, the SP2 is brass and the Z21 is aluminum.

I wouldn't call either of them large, but nothing really matches the compactness of the LLL 50mm f/2 Elcan. I should be getting a copy of the Z21 for review soon and will compare it with several other 50mm f/2 lenses.
May 18, 2025 at 07:27 PM
Nick YR
Offline
Details
p.75 #19Light Lens Lab (LLL) replica lenses discussion & image thread
Would be nice to compare it with your Lux V3 too, Fred

Fred Miranda wrote:
Nick YR wroteVery nice!

It does look a bit big though, do you know what is its diameter and length?

mgibo wroteI was fortunate enough to pick up a limited early release of the LLL 50mm f1.5 Z21 at a camera event in Japan today. This is my first lens from Light Lens Lab. My first impressions of the lens are that it is a lot lighter than I expected. Although it is a little front heavy mounted on my M9-P. The aperture ring is really smooth and the focus ring is a little bit more stiff compared to the aperture ring. Focusing is really easy and accurate with my M9. I know it’s not for everyone but I really like the character of this lense in the way it swirls. There is a bit of glow and purple fringing but I still really like it. The only thing I don’t like so far is the cap. It’s nice that it’s metal, but it’s a screw on type so it’s a pain to put on and take off.

I will attach a few photos I took around a park.
This is my first time uploading photos so I hope it works.
Excluding the first photo all of these are shot wide open at 1.5 with a Leica M9. JPEGs are SOOC.
According to the specs, the Z21 is just 3mm longer than the LLL 50mm f/2 SP2, and it's also slightly lighter at 313g compared to 349g. So overall, very similar in size and weight. However, the SP2 is brass and the Z21 is aluminum.

I wouldn't call either of them large, but nothing really matches the compactness of the LLL 50mm f/2 Elcan. I should be getting a copy of the Z21 for review soon and will compare it with several other 50mm f/2 lenses.


May 18, 2025 at 08:26 PM
Fred Miranda
Offline
Admin
Upload & Sell: On
Details
p.75 #20Light Lens Lab (LLL) replica lenses discussion & image thread
Nick YR wrote:
Would be nice to compare it with your Lux V3 too, Fred

Fred Miranda wrote
Nick YR wroteVery nice!

It does look a bit big though, do you know what is its diameter and length?

mgibo wroteI was fortunate enough to pick up a limited early release of the LLL 50mm f1.5 Z21 at a camera event in Japan today. This is my first lens from Light Lens Lab. My first impressions of the lens are that it is a lot lighter than I expected. Although it is a little front heavy mounted on my M9-P. The aperture ring is really smooth and the focus ring is a little bit more stiff compared to the aperture ring. Focusing is really easy and accurate with my M9. I know it’s not for everyone but I really like the character of this lense in the way it swirls. There is a bit of glow and purple fringing but I still really like it. The only thing I don’t like so far is the cap. It’s nice that it’s metal, but it’s a screw on type so it’s a pain to put on and take off.

I will attach a few photos I took around a park.
This is my first time uploading photos so I hope it works.
Excluding the first photo all of these are shot wide open at 1.5 with a Leica M9. JPEGs are SOOC.
According to the specs, the Z21 is just 3mm longer than the LLL 50mm f/2 SP2, and it's also slightly lighter at 313g compared to 349g. So overall, very similar in size and weight. However, the SP2 is brass and the Z21 is aluminum.

I wouldn't call either of them large, but nothing really matches the compactness of the LLL 50mm f/2 Elcan. I should be getting a copy of the Z21 for review soon and will compare it with several other 50mm f/2 lenses.

Definitely planning to test it against the 50mm f/1.4 Lux pre-asph.
From the optical design and barrel shape, the new LLL 50mm f/1.5 Z21 looks like it has a nicely "integrated" hood.




May 20, 2025 at 01:19 PM


FM ForumsSony ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister