fredmiranda.com Login

Light Lens Lab (LLL) replica lenses discussion & image thread

  
 
dumchidumchi
Offline
Details
p.64 #1Light Lens Lab (LLL) replica lenses discussion & image thread
buggz wrote:
Any favorites for these 3rd party hoods?


Something like this would work...
https://www.aliexpress.com/item/1005002345103077.html
Oct 16, 2024 at 08:54 AM
rscheffler
Offline
Details
p.64 #2Light Lens Lab (LLL) replica lenses discussion & image thread
dumchidumchi wrote:
I have the E39 Push-on Lens Hood for both of my 35mm f/2 and 50mm f/2 ELCAN. This hood is good. Same thing as the Push-on Lens Hood for the SPII. No problem with these 3.

The problem I have is the hood for the 50mm f/1.2 "1966" and the 28mm f/2.8 Nine Element. Someone has already replied and mentioned that their hood for the 50mm f/1.2 scratches the lens outer rim when it was fitted. And scratch also happens as well on my 28mm f/2.8 Nine Element.

Those inexpensive 3rd party threaded hood would solve the problem. But I hope
...Show more →

I thought the original Leica hoods from that era, that use the small 'claws' to secure the hood to the groove on the outside of the lens, also scratched the original lenses. One could argue that this is a faithful reproduction of the originals.
Oct 16, 2024 at 09:25 AM
dumchidumchi
Offline
Details
p.64 #3Light Lens Lab (LLL) replica lenses discussion & image thread
rscheffler wrote:
dumchidumchi wroteI have the E39 Push-on Lens Hood for both of my 35mm f/2 and 50mm f/2 ELCAN. This hood is good. Same thing as the Push-on Lens Hood for the SPII. No problem with these 3.

The problem I have is the hood for the 50mm f/1.2 "1966" and the 28mm f/2.8 Nine Element. Someone has already replied and mentioned that their hood for the 50mm f/1.2 scratches the lens outer rim when it was fitted. And scratch also happens as well on my 28mm f/2.8 Nine Element.

Those inexpensive 3rd party threaded hood would solve the problem. But I hope that LLL would look into the issue and make adjustments and changes to their future products.
I thought the original Leica hoods from that era, that use the small 'claws' to secure the hood to the groove on the outside of the lens, also scratched the original lenses. One could argue that this is a faithful reproduction of the originals.


I understand your reply was a light-hearted joke. :-)

On a more serious note. On the 28mm f/2.8 Nine Element, LLL have in fact made changes to the original Leica design. My understanding from Macfilos review is that the sixth inner element was changed to an Extra-Low Dispersion (ED) glass. It made a marginal increase in resolution in the centre, a drastic increase in resolution in the corners and edges, and drastically minimised distortion and chromatic aberration. Out-of-focus characteristics are now more rounded, with a pleasant circular out-of-focus bokeh. It also eliminated the red-fringing that occurred with digital camera sensors with the original lens.

In other words, LLL have made improvements across the board to the original Leica design. It is not a "true" faithful recreation. ;-)

Anyway, I hope LLL would look into this issue and make future improvement on their products. The issue can be resolve very easily. For example, a thin velvet fabric of some sort inside the lens hood can easily prevent the hood from scratching the lens.
Oct 17, 2024 at 06:51 AM
catacore
Offline
Details
p.64 #4Light Lens Lab (LLL) replica lenses discussion & image thread
.

Edited on Jan 13, 2025 at 06:09 AM · View previous versions
Oct 17, 2024 at 11:38 AM
darkspark_
Offline
Details
p.64 #5Light Lens Lab (LLL) replica lenses discussion & image thread
dumchidumchi wrote:
On the 28mm f/2.8 Nine Element... LLL have made improvements across the board to the original Leica design...


Do you recommend the LLL 28mm 9e? It's great to learn about the updates they've made from the original model. However, I'm still on the hunt for more details and comparisons with other 28mm lenses in the same price range, like the new ones from Voigtlander and others.

I recall Fred mentioning he was planning to review the LLL 28mm 9e, but it's been quite a while, and oddly enough, there still isn't much info about the lens online.
Oct 17, 2024 at 09:36 PM
BPsmith511
Offline
Details
p.64 #6Light Lens Lab (LLL) replica lenses discussion & image thread
darkspark_ wrote:
dumchidumchi wroteOn the 28mm f/2.8 Nine Element... LLL have made improvements across the board to the original Leica design...
Do you recommend the LLL 28mm 9e? It's great to learn about the updates they've made from the original model. However, I'm still on the hunt for more details and comparisons with other 28mm lenses in the same price range, like the new ones from Voigtlander and others.

I recall Fred mentioning he was planning to review the LLL 28mm 9e, but it's been quite a while, and oddly enough, there still isn't much info about the lens online.


IIRC it only recently started shipping.
Oct 18, 2024 at 06:57 AM
dumchidumchi
Offline
Details
p.64 #7Light Lens Lab (LLL) replica lenses discussion & image thread
darkspark_ wrote:
dumchidumchi wroteOn the 28mm f/2.8 Nine Element... LLL have made improvements across the board to the original Leica design...
Do you recommend the LLL 28mm 9e? It's great to learn about the updates they've made from the original model. However, I'm still on the hunt for more details and comparisons with other 28mm lenses in the same price range, like the new ones from Voigtlander and others.

I recall Fred mentioning he was planning to review the LLL 28mm 9e, but it's been quite a while, and oddly enough, there still isn't much info about the lens online.


I don't think I'm in a position of making recommendation to anyone. Everyone has his/her likes and dislikes and we all have our own use case with our gears. With my limited time of using it, I like what I'm getting out of this lens for street photography. The sharpness, the colour rendition, contrast, distortion level...all look good to my eyes. I have never used the original Leica Nine Element so I can't comment on the comparison.

Comes to think of it, I can make a recommendation on this lens. Don't use the included hood. Go buy an inexpensive threaded hood with cap. ;-)
Oct 18, 2024 at 08:01 AM
raizans
Offline
Details
p.64 #8Light Lens Lab (LLL) replica lenses discussion & image thread
What caused the scratches, the claws not retracting fully?
Oct 18, 2024 at 09:36 AM
catacore
Offline
Details
p.64 #9Light Lens Lab (LLL) replica lenses discussion & image thread
.

Edited on Jan 13, 2025 at 06:09 AM · View previous versions
Oct 18, 2024 at 11:47 AM
dumchidumchi
Offline
Details
p.64 #10Light Lens Lab (LLL) replica lenses discussion & image thread
raizans wrote:
What caused the scratches, the claws not retracting fully?


I have been super careful to make sure I have pressed the tabs fully and the claws were fully retracted before very slowly and carefully slided the hood onto the lens.

When you have two pieces of metal and you slide one onto the other, it's very easy to cause scratches. And this can be easily resolve by having a thin layer of velvet or rubber to provide padding between the two metal pieces coming into direct contact with each other which could prevent scratching damages. Of course, this will involve a slightly more gap between the hood and the lens which depends on the thickness of the velvet padding. A slight redesign on the hood dimension would be needed.

I have talked to the shop where I bought all my LLL lens fr. They are going to pass on my findings to LLL. Hopefully, they will look into the issue and make changes for future products.

My orders of 3rd party threaded hood with cap should be here very soon...
Oct 19, 2024 at 07:09 AM
 


Search in Used Dept. 

highdesertmesa
Offline
Details
p.64 #11Light Lens Lab (LLL) replica lenses discussion & image thread
dumchidumchi wrote:
raizans wroteWhat caused the scratches, the claws not retracting fully?
I have been super careful to make sure I have pressed the tabs fully and the claws were fully retracted before very slowly and carefully slided the hood onto the lens.

When you have two pieces of metal and you slide one onto the other, it's very easy to cause scratches. And this can be easily resolve by having a thin layer of velvet or rubber to provide padding between the two metal pieces coming into direct contact with each other which could prevent scratching damages. Of course, this will involve a slightly more gap between the hood and the
...Show more →

Is the material of the lens brass under the scratches? If so, the scratches over time might look like a nice ringed patina.
Oct 19, 2024 at 08:57 AM
darkspark_
Offline
Details
p.64 #12Light Lens Lab (LLL) replica lenses discussion & image thread
Found another LLL 28mm 9e review:
https://youtu.be/YYK3vpNwe5I

Seems like he really likes the lens hood: “It’s probably the best lens hood coming from any manufacturer on any lens”

Though I'm not clear on why it's "the best". It's just because he likes the looks of it?
Oct 21, 2024 at 10:52 AM
rsolti13
Offline
Details
p.64 #13Light Lens Lab (LLL) replica lenses discussion & image thread
highdesertmesa wrote:
dumchidumchi wrote
raizans wroteWhat caused the scratches, the claws not retracting fully?
I have been super careful to make sure I have pressed the tabs fully and the claws were fully retracted before very slowly and carefully slided the hood onto the lens.

When you have two pieces of metal and you slide one onto the other, it's very easy to cause scratches. And this can be easily resolve by having a thin layer of velvet or rubber to provide padding between the two metal pieces coming into direct contact with each other which could prevent scratching damages. Of course, this will involve a slightly more gap between the hood and the lens which depends on the thickness of the velvet padding. A slight redesign on the hood dimension would be needed.

I have talked to the shop where I bought all my LLL lens fr. They are going to pass on my findings to LLL. Hopefully, they will look into the issue and make changes for future products.

My orders of 3rd party threaded hood with cap should be here very soon...
Is the material of the lens brass under the scratches? If so, the scratches over time might look like a nice ringed patina.


My LLL 35 8e has a nice ring brassing due to exactly this. I prefer it
Oct 21, 2024 at 11:56 AM
highdesertmesa
Offline
Details
p.64 #14Light Lens Lab (LLL) replica lenses discussion & image thread
rsolti13 wrote:
highdesertmesa wrote
dumchidumchi wrote
raizans wroteWhat caused the scratches, the claws not retracting fully?
I have been super careful to make sure I have pressed the tabs fully and the claws were fully retracted before very slowly and carefully slided the hood onto the lens.

When you have two pieces of metal and you slide one onto the other, it's very easy to cause scratches. And this can be easily resolve by having a thin layer of velvet or rubber to provide padding between the two metal pieces coming into direct contact with each other which could prevent scratching damages. Of course, this will involve a slightly more gap between the hood and the lens which depends on the thickness of the velvet padding. A slight redesign on the hood dimension would be needed.

I have talked to the shop where I bought all my LLL lens fr. They are going to pass on my findings to LLL. Hopefully, they will look into the issue and make changes for future products.

My orders of 3rd party threaded hood with cap should be here very soon...
Is the material of the lens brass under the scratches? If so, the scratches over time might look like a nice ringed patina.
My LLL 35 8e has a nice ring brassing due to exactly this. I prefer it


I've been very tempted to sand my Safari version to look like the "Time" edition
Oct 21, 2024 at 02:15 PM
Sonnar-7
Offline
Details
p.64 #15Light Lens Lab (LLL) replica lenses discussion & image thread
Light Lens Lab is teasing a new 50mm f2 that just might be a black summicron v2 dual range like.
I wouldn’t mind since Fred has recommanded me that lens a number of times when I was looking for a poor man’s Summilux but was always rebuted by its shiny chrome aspect and the fact that they are still expensive when you look at how badly they are damaged.

Oct 23, 2024 at 02:17 AM
rsolti13
Offline
Details
p.64 #16Light Lens Lab (LLL) replica lenses discussion & image thread
Sonnar-7 wrote:
Light Lens Lab is teasing a new 50mm f2 that just might be a black summicron v2 dual range like.
I wouldn’t mind since Fred has recommanded me that lens a number of times when I was looking for a poor man’s Summilux but was always rebuted by its shiny chrome aspect and the fact that they are still expensive when you look at how badly they are damaged.



It’s supposed to be a rigid remake. Focuses down to 0.7 though, which will be nice. I’m definitely interested in this one as well. Sometime in 2025 (maybe 2026 for the APO) they still have the 35 AA and APO coming out. They’re cranking out solid lenses fast
Oct 23, 2024 at 04:30 AM
highdesertmesa
Offline
Details
p.64 #17Light Lens Lab (LLL) replica lenses discussion & image thread
Took the M11-D and LLL 8E with me up to Santa Fe today for lunch and enjoyed seeing some fall colors.





Left: heavy vignette added in LRC | Right: vignetting removed in LRC

  LEICA M11-D    Summicron-M 1:2/35 lens    35mm    f/2.4    1/800s    64 ISO    0.0 EV  

Oct 23, 2024 at 04:05 PM
Adamwilbert
Offline
Details
p.64 #18Light Lens Lab (LLL) replica lenses discussion & image thread
The weight on the 8e is listed as “206g to 261g (depending on different finishes)”

Is there info somewhere on which finishes are which weight?
Oct 23, 2024 at 04:25 PM
highdesertmesa
Offline
Details
p.64 #19Light Lens Lab (LLL) replica lenses discussion & image thread
Adamwilbert wrote:
The weight on the 8e is listed as “206g to 261g (depending on different finishes)”

Is there info somewhere on which finishes are which weight?


You’d have to email them and ask to be sure, but the extra weight could be the brass lens hood and filter that’s included with some of the special editions.

Edit: I forgot about the new stainless steel model, that might be heavier
Oct 23, 2024 at 04:54 PM
Desmolicious
Offline
Details
p.64 #20Light Lens Lab (LLL) replica lenses discussion & image thread
darkspark_ wrote:
Found another LLL 28mm 9e review:
https://youtu.be/YYK3vpNwe5I

Seems like he really likes the lens hood: “It’s probably the best lens hood coming from any manufacturer on any lens”

Though I'm not clear on why it's "the best". It's just because he likes the looks of it?


What did he have to say about the lens caps? That’s what I base my purchasing decisions on.
Oct 23, 2024 at 09:16 PM


FM ForumsSony ForumJoin Upload & Sell
  
 

You are not logged inLog inRegister