p.2 #1Sony FE to Nikon Z Electronic adapter from China
naturephoto1 wrote:
So according to Lloyd Chambers the actual sensor stack thickness of the Z7 is 2.3mm.
Rich
Thanks for reminding,I didn't notice that Lloyd Chambers updated the content of this article on 2018-11-03
Update 2018-11-03: turns out that the 1.1mm figure from KolariVision for the sensor cover glass does not include the expoxied-on glass portion of the sensor. So the real figure is ~2.3mm total glass thickness, not 1.1mm
p.2 #3Sony FE to Nikon Z Electronic adapter from China
Steve Spencer wrote: naturephoto1 wroteolalafoto wroterealVivek wroteI am curious, where do you get the number 1.1mm?https://diglloyd.com/blog/2018/20181009_1248-NikonZ7-cover-glass-thickness.htmlSo according to Lloyd Chambers the actual sensor stack thickness of the Z7 is 2.3mm.
RichYes, if you include the glass epoxied onto the sensor chip. Some consider this part of the sensor stack some do not.
Hi Steve,
Now I am confused. Kolari modded one of my A7r cameras with the V3 cover glass that is 0.8mm thick and before the 0.2mm UT cover glass was offered. So, what are the thickness of the stock Sony sensor stack, my 0.8mm thick V3 cover glass sensor stack, and the 0.2mm UT cover glass sensor stack?
p.2 #5Sony FE to Nikon Z Electronic adapter from China
First, that was my original concern about Kolari’s numbers, because they don’t remove the last epoxied glass. However I’m not sure how Lloyd arrived at 3mm+, as Daniel Morrison who does the monochrome conversions has measured it at 0.7mm, with Sony’ total being 2.5mm.
naturephoto1 wrote: olalafoto wroterealVivek wroteI am curious, where do you get the number 1.1mm?https://diglloyd.com/blog/2018/20181009_1248-NikonZ7-cover-glass-thickness.htmlSo according to Lloyd Chambers the actual sensor stack thickness of the Z7 is 2.3mm.
p.2 #6Sony FE to Nikon Z Electronic adapter from China
Mid distances, 10-50’ give or take. Should only get worse towards infinity as the ray angle increases.
olalafoto wrote: Mathieu18 wroteSorry to rain on everyone’s parade, but I had an A7RII modified that had a 1.8mm total sensor stack and the L35 was SIGNIFICANTLY worse vs a stock Sony. I’ll see if I can find samples but it will degrade on a Z camera, as will likely all the Sony wide primes.Thx
p.2 #7Sony FE to Nikon Z Electronic adapter from China
From conversations with Ilija at Kolari, all glass between the actual light sensing site and the rear element matter. So whether you call it part of the stack or part of the sensor it will have an effect on a lenses performance, if designed for some other stack/sensor combo. Hence the total is the number that needs watched, regardless what’s its allocated too.
Steve Spencer wrote: naturephoto1 wroteolalafoto wroterealVivek wroteI am curious, where do you get the number 1.1mm?https://diglloyd.com/blog/2018/20181009_1248-NikonZ7-cover-glass-thickness.htmlSo according to Lloyd Chambers the actual sensor stack thickness of the Z7 is 2.3mm.
RichYes, if you include the glass epoxied onto the sensor chip. Some consider this part of the sensor stack some do not.
p.2 #9Sony FE to Nikon Z Electronic adapter from China
Fred Miranda wrote:
It's definitely interesting but the Z7's thinner filter stack may not improve performance for this lens. Do you love the Loxia 35/2 that much to go through the trouble of adapting it on your Nikon?
Not for loxia35,Under extreme conditions, such as cloudy days with very thick clouds, loxia21 and loxia25 may exhibit abnormal ring-shaped colorshift on a7R3,a7R2,a7R,a73 and a72. so, I need to test with Nikon Z.
p.2 #10Sony FE to Nikon Z Electronic adapter from China
A) are you compensating lens shading in camera AND in raw processor? I’ve seen that many times. B) the sensor tech under the glass is the same though micro lenses may vary, so may or may not have any effect on observed color shift. Just food for thought.
olalafoto wrote: Fred Miranda wroteIt's definitely interesting but the Z7's thinner filter stack may not improve performance for this lens. Do you love the Loxia 35/2 that much to go through the trouble of adapting it on your Nikon?Not for loxia35,Under extreme conditions, such as cloudy days with very thick clouds, loxia21 and loxia25 may exhibit abnormal ring-shaped colorshift on a7R3,a7R2,a7R,a73 and a72. so, I need to test with Nikon Z.
p.2 #11Sony FE to Nikon Z Electronic adapter from China
Steve Spencer wrote: Holger wrotePhillip Reeve wroteSeeing how many iterations there were of both Metabones and Sigma's EF to FE adapters I would be rather hesitant in this case as well. Realizing such an adapter well requires more resources than Techart seems to have. I guess we will see more adapters in the future.What about moisture resistance, dust, etc?
What would people gain with such an adapter if already owing an A7riii? Buy an additional Nikon Z, what for?I think the reason to buy and Nikon Z is if you decided to move away from Sony but wanted to still use some E mount glass. The Nikon Z system is interesting to me for some of the glass that will perform better on it than a Sony. For example, I really like the Nikon 300 f/4 PF and the 500 f/5.6 PF and they are much more easily adapted to Nikon Z and will like perform better on it than with the Commlite adapter on the Sony E mount. For me I also would like that my Milvus lenses in F mount would be adapted with full EXIF. I would hate to leave some Sony E mount lenses behind, however. I think that is reason to hope that a Loxia 85 f/2.4 would work pretty well on the Nikon Z and that is one of my favorite lenses. I would also love it if the Loxia 21, 25, and Voigtlander 40 f/1.2 worked well, but I am less sure they won't see a performance degradation.
For me it is an interesting question whether the Nikon Z sensor stack performs better with Leica M mount lenses or Sony E mount lenses. Consider a couple of examples: how does the Leica M 21 f/3.4 Asph work? How about the Lox 21 f/2.8? The Voigtlander 21 f/3.4? Do they all work pretty well? If they do you get more choice with the Nikon. Do none of them work very well? Then the Nikon's sensor stack is in a no-man's anti-goldilocks zone which makes the camera pretty undesirable to me. My guess is that it is somewhere between these extremes and I am very interested in just where it lands. I am not surprised there is an adapter that let's it mount at least some E mount lenses, but the big question isn't answered yet: how do those lenses perform on that camera? Depending on the answer to that question there either could be a compelling reason for me to get this camera and move away from Sony or not reason at all....Show more →
I am not a fan of Leica lenses. This scenario you mention is relevant to a minority of shooters only having such lenses. So maybe it helps those wanting to get the best out of those lenses.
I can understand that people still having a lot of Nikon gear or need long lenses not available for Sony right now (but which will change for sure) want to go back. But if you have an A7riii and the Loxias and other Sony glass, I see no reason to switch unless such a special lens is of paramount importance. I see the photographer as being the weakest link in general given the performance of recent gear.
p.2 #15Sony FE to Nikon Z Electronic adapter from China
Mathieu18 wrote:
A) are you compensating lens shading in camera AND in raw processor? I’ve seen that many times. B) the sensor tech under the glass is the same though micro lenses may vary, so may or may not have any effect on observed color shift. Just food for thought.
p.2 #16Sony FE to Nikon Z Electronic adapter from China
That’s definitely a software issue. Off in camera AND off in raw processor? Looks more like a raw processor issue.
olalafoto wrote: Mathieu18 wroteA) are you compensating lens shading in camera AND in raw processor? I’ve seen that many times. B) the sensor tech under the glass is the same though micro lenses may vary, so may or may not have any effect on observed color shift. Just food for thought.Correction on or off, no difference
p.2 #19Sony FE to Nikon Z Electronic adapter from China
Mathieu18 wrote:
That’s definitely a software issue. Off in camera AND off in raw processor? Looks more like a raw processor issue.
Image Edge,C1, ACR, LR, the issue is exactly the same,and A7R3, A7R2, A7R, A73, A72 all have the same issue,it's occurs on overcast,very thick clouds or a vast expanse of white(for example, the snow in the fog),only A7s doesn't have this issue,the higher the pixel, the more serious the issue is,I tested and took many pictures on this issue.
so I don't think it's a software issue, maybe it's a sensor issue, or maybe Loxia21 and Loxia25 doesn't match the sensor perfectly.
*****************************************************************************************************************************
Color Shifting Ring Pattern
The Ziess Sonnar 35mm also has a strange color shifting that occurs in a ring like pattern.
You won’t notice this unless your doing some heavy color and contrast work or shooting solids. Like I’ll get a little banding when shooting clear blue skies. And it’s not fun to fix.
You can see it here here with saturation and vibrance maxed.
I went and tested this with all my other lenses and none of them had problems like this. I did get some color shifts but not with the ring like pattern of the Sony Zeiss 35mm.
*****************************************************************************************************************************
p.2 #20Sony FE to Nikon Z Electronic adapter from China
Mathieu18 wrote:
Hard edges like that aren’t marks on the lens. It’s shading correction gone wrong, almost always in the computer.
sebbe wroteIt can also be cleansing material on the lens.
The edges don't look that hard in picture two. The "color shift shape" looks rather like a visualisation approach.
Sorry, my bad. My reply was meant to be a joke. IMO it's a mixture of noise, processing and oversaturation. Therefore, yes I think it's a software issue too. but in combination with the vignetting of the lens itself.
I'll check my lox21+a7RII combo tonight. I have some shots with an LCC calibration plate. These plates are made to identify (and negate) colour shifts (and other stuff) of a lens. I'll use the corrections very often. Especially with the voigtländer lenses, I have the feeling that there is some slight colour shift toward the edges. I never did some serious checks there. The pictures just look better with LCC-correction than with the software vignetting reduction. That's the main reason.