Archive 2017 · Foot for the Canon 400mm DO II

RobAmy
Offline
• • • • • •
Upload & Sell: On

p.2 #1 · Foot for the Canon 400mm DO II

Geoff I would not even attempt to stand it up with the heavy glass. It barely did the 400. I think the 200-400 would be a big issue which it also fits. I would say that is a fail in the design. Just as a hood not to bad. Another note you need two hands to put it on and take it off.

Feb 16, 2017 at 08:49 PM

NickRno77
Offline
• •
Upload & Sell: Off

p.2 #2 · Foot for the Canon 400mm DO II

I need a low profile foot for the 400mm F4 DO MKII , I know this is an old post but I was wondering if anyone has tried the Hejna Low Profile foot�

http://www.hejnarphotostore.com/product-p/h133.htm

Also would it possible to reverse the hood with a low profile Lens Foot ?

Thanks

Apr 25, 2022 at 06:06 AM

Dave_E
Offline
• • • • •
Upload & Sell: On

p.2 #3 · Foot for the Canon 400mm DO II

I have the RRS LCF-52 on mine and I use it with the hood reversed to hold it all the time.

Dave

Apr 25, 2022 at 06:54 AM

NickRno77
Offline
• •
Upload & Sell: Off

p.2 #4 · Foot for the Canon 400mm DO II

Dave_E wrote:
I have the RRS LCF-52 on mine and I use it with the hood reversed to hold it all the time.

Dave

Ha Ha well that will work with a Zemlin Hood, what about a standard hood. I�m asking about a low profile foot. 😂

Apr 25, 2022 at 07:24 AM

Ronin77
Offline
•
Upload & Sell: Off

p.2 #5 · Foot for the Canon 400mm DO II

Just FYI

I used a 4th Generation Designs Canon 500F4 lens which I had surplus, I purchased some longer screws and 3d Printed a spacer which allowed me to reverse the hood.

Sorry can�t attach a photo, PM me if you want to have a look.

May 24, 2024 at 06:12 AM

NickRno77
Offline
• •
Upload & Sell: Off

p.2 #6 · Foot for the Canon 400mm DO II

May 25, 2024 at 10:53 AM

1 2 end
FM Forums \| Canon Forum \| Join Upload & Sell 1 2 end