There is some drain but more like 2-3% overnight. Didn't even notice until I read this thread. The camera drains very slowly on its own, and the difference is noticeable. Still keeping the adapter on, though. Yours is probably a bad unit.
And all batteries drain slowly, with no connection to any device. I would say 0.5–1.0%/day is to be expected. Joining this thread because this adapter is a very exciting device.
Fred Miranda wrote: k-h.a.w wroteHi Fred, have you used your WATE yet on the TechArt Pro adapter?
I am curious about your take on that.
Somebody pointed out the WATE has internal focusing.
But I don't think it has an FLE.
K-H.Sorry, I no longer have the WATE.
BTW: There are 2 apps. One we can download from the Google, Apple store and it's mainly to update the adapter's firmware.
Not official test but I think I lost maybe 2 percent overnight. Tonight I'll do a real test.
I'm going after my L bracket with a Dremel this morning. It does actually work now but it's very very close to hitting the adapter. I think I can get to that than I need to extend it down past the adapter for quick release on tripod a little. I got a idea for that.
GMPhotography wrote:
Not official test but I think I lost maybe 2 percent overnight. Tonight I'll do a real test.
I'm going after my L bracket with a Dremel this morning. It does actually work now but it's very very close to hitting the adapter. I think I can get to that than I need to extend it down past the adapter for quick release on tripod a little. I got a idea for that.
No animals will be hurt during this process. Lol
Guy,
Just make sure you keep all 10 fingers without any damage.
I tested for battery drain and was surprised by the result.
I put a freshly recharged battery on the camera (at 100%)
The adapter had a Leica 90/2.5 on it but I don't think it would matter which lens. This was at 10:30pm last night.
I just checked this morning and the battery was still at 100% after 8:30 hours...
TechArt Pro admitted there is a very small drain but I could not see any...
Fred Miranda wrote:
I tested for battery drain and was surprised by the result.
I put a freshly recharged battery on the camera (at 100%)
The adapter had a Leica 90/2.5 on it but I don't think it would matter which lens. This was at 10:30pm last night.
I just checked this morning and the battery was still at 100% after 8:30 hours...
TechArt Pro admitted there is a very small drain but I could not see any...
Great news! I'll do a similar test after I receive mine later today.
rji2goleez wrote: Fred Miranda wroteI tested for battery drain and was surprised by the result.
I put a freshly recharged battery on the camera (at 100%)
The adapter had a Leica 90/2.5 on it but I don't think it would matter which lens. This was at 10:30pm last night.
I just checked this morning and the battery was still at 100% after 8:30 hours...
TechArt Pro admitted there is a very small drain but I could not see any...Great news! I'll do a similar test after I receive mine later today.
I just did a full firmware update with the adapter attached. (A7RII firmware version 3.3 update)
It took 15 minutes total time and the battery is still at 100%!
Do you use this on the A7RII? Listing notes it's for the A7II, and I know there are differences that can impact the utility of L-mounts (batter door etc)
rji2goleez wrote: Fred Miranda wroteGMPhotography wroteHere and I'm not happy. My L bracket gets in the way. I have a Sunway photo L bracket
It looks like I have a defective unit.
I don't see why it would be draining that much of my battery.
I will be contacting TechArt. Thanks Fred for that info!
Fred Miranda wrote:
I tested for battery drain and was surprised by the result.
I put a freshly recharged battery on the camera (at 100%)
The adapter had a Leica 90/2.5 on it but I don't think it would matter which lens. This was at 10:30pm last night.
I just checked this morning and the battery was still at 100% after 8:30 hours...
TechArt Pro admitted there is a very small drain but I could not see any...
I put a rubber gasket flat in between the plate and camera and that extended it down enough for the tripod to catch the grooves . Than on the front of the plate I did grind it down enough to put adapter on and off without any rubbing.
I put a rubber gasket flat in between the plate and camera and that extended it down enough for the tripod to catch the grooves . Than on the front of the plate I did grind it down enough to put adapter on and off without any rubbing.
Good to know because I have the Sunway bracket as well. Very well-built.
Fred Miranda wrote: GMPhotography wroteFixed the Sunway L bracket.
I put a rubber gasket flat in between the plate and camera and that extended it down enough for the tripod to catch the grooves . Than on the front of the plate I did grind it down enough to put adapter on and off without any rubbing.Good to know because I have the Sunway bracket as well. Very well-built.
Yea going to Ace hardware get a nicer rubber gasket later today. Like 1/8th thick
Fred Miranda wrotek-h.a.w wroteHi Fred, have you used your WATE yet on the TechArt Pro adapter?
I am curious about your take on that.
Somebody pointed out the WATE has internal focusing.
But I don't think it has an FLE.
K-H.Sorry, I no longer have the WATE.
BTW: There are 2 apps. One we can download from the Google, Apple store and it's mainly to update the adapter's firmware.