IndyFab wrote:
arbitrage wrote
IndyFab wrote
arbitrage wrote
IndyFab wrote
pliukait wrote
A very handsome young fella!! Gotta love those GSDs.
Regards.....Pete Thank you Pete
Looks like those young eagles are doing fine flying arbitrage. Which zone are you using when you use zone, I'm using the first zone mode with the 3x4 grid of points (not wide zone). As long as you don't have foreground distractions it works really well. I find the AF inconsistencies almost fully non-existant in this mode. You give up a bit of control to the system but the system seems to work better than in AF-expansion mode.
This was the first series of shots that got me interested in zone mode, I was surprised how well it tracked these two mallards against super distracting background and all 10 shots in my burst were tack sharp on the subjects. So then you would have to be in Case 5 or 6....Correct? Also you would have to have EOS iTR AF turned on. Correct? No Case 1, iTR turned off. Case 5 and 6 just increase the speed of point switching. The points still switch in the other modes. Ok sure, since you were not utilizing a full zone, there would be no need for case 5 or 6 or iTR turned on, which makes sense.
Thanks for the clarification
Even in Full zone and 65 pt modes you still don't need to use 5 and 6 or iTR. Case 5 and 6 make a change to the default setting for AF point switching (the 3rd slider). Canon therefore has to mention that if you are in one-shot mode then making that change won't affect your shooting. But this doesn't mean that the switching isn't happening in Case 1 through 4, it is just at default sensitivity.
I shoot Case 1 default almost all the time now, as I've given up trying to subjectively or objectively quantify any meaningful difference between the cases. I have always left iTR off as I didn't use to use zone modes but I may try to turn it on again to see if it helps when I use zone mode.