Anybody using the 70-300 AF-P VR DX lens with an FT1?
I haven’t owned an FT1 for a while but just acquired one again so I thought I would try it with my V3 and 70-300 AF-P.
No luck - I got the message that I needed a lens on the camera along with some hideous noises as the lens hunted ( in normal use on my D7200 or 850 it is very quiet). So I tried several other F mount lenses - all AFS - and my 16-80, 50 1.8 and 85 1.8 all worked well so I had another go with the AF-P lens and it worked! Pretty good AF if it started in the general range. I checked the pics on the computer and they looked decent so I decided to have another go at ISO 160 instead of 1600 which I had the camera set to from my last use. Same frustrating experience as the first time. I have tried everything I could think of - checked the firmware (1.10 for both camera and FT1), remounted lens and FT1 in a different order etc. Also spent 45 mins on thr phone to Nikon - I bought the lens direct from Nikon USA as a refurb about 3 weeks ago - and they too seem baffled.
Any thoughts?
Thanks
Patrick