I\'m starting a new one because right now, you need to pull bits and pieces from several areas, and none of the instructions really hold your hand for someone who isn\'t savvy. If I\'ve missed a step, or a step isn\'t detailed enough, please let me know.
2. Burn the disc (CD or DVD). There are a million ways to do this, I like Nero.
- Open Nero and select \'Recorder -> Burn Image\'.
- A new window will open, in the top left corner it should say DVD or CD. If it says the opposite of what you want, click the drop down and change it.
- Navigate to and select the Ubuntu file, then select \'Burn\'.
3. Leave the disc in your drive and restart your computer to boot in Ubuntu.
- I believe most systems will boot from CD automatically, see below for a generic \'how to set your pc to boot from cd\'
- http://www.hiren.info/pages/bios-boot-cdrom
4. It might take a little bit, but an Ubuntu Try/Install window will pop up.
- Select \'Try Ubuntu\', nothing will appear to be happening.
- Click the X in the upper left corner of the Try/Install window, it\'s okay if the little disc is still spinning.
- After closing the window, you should see the basic desktop environment.
5. In the upper left corner, select \'Applications -> Accessories -> Terminal\'.
- A command line window will open, type \'sudo apt-get update\' and press enter. Take special care to type everything exactly, including spaces.
- Leave the Terminal window open for now.
6. In the upper left corner, select \'Applications -> Ubuntu Software Center\'.
- The Software Center window will open, select \'Edit - > Software Sources\'.
- A new window should open and default to the furthest left tab.
- Check the box that says \'Community-Maintained Open Source Software (universe)\', then select \'Close\'.
- It will sit there and update for several seconds, select the X in the top left corner of the window when it\'s done.
7. Heading back to the Terminal window.
- Type \'sudo apt-get install gphoto2\' and press enter. Take special care to type everything exactly, including spaces.
- You will be asked to enter \'y/n\' to continue. Type the letter \'y\' on your keyboard and press enter.
8. Connect your camera with a USB cable and turn the camera on.
- From here on, don\'t let your camera fall asleep.
9. In the top left corner, select \'Places -> Canon Digital Camera\'.
- A new window will open, select \'File -> Unmount\'.
- Close the window by selecting the X in the upper left corner.
10. Heading back to the Terminal window.
- Again, make sure your camera hasn\'t gone to sleep.
- Type \'gphoto2 --list-config\' and then press enter. Take special care to type everything exactly, including spaces.
- Type \'gphoto2 --get-config /main/status/shuttercounter\' and press enter.
- You should now see your shutter count displayed inside the Terminal window, it will be displayed as:
Label: Shutter Counter
Type: Text
Current: xxxxx (the xxxxx represents your shutter count)
Make sure you type everything correctly, I missed the space between \'config\' and \'/main\' in Step 10 that caused me some grief.
I\'m starting a new one because right now, you need to pull bits and pieces from several areas, and none of the instructions really hold your hand for someone who isn\'t savvy. If I\'ve missed a step, or a step isn\'t detailed enough, please let me know.
2. Burn the disc (CD or DVD). There are a million ways to do this, I like Nero.
- Open Nero and select \'Recorder -> Burn Image\'.
- Navigate to and select the Ubuntu file, then burn.
3. Leave the disc in your drive and restart your computer to boot in Ubuntu.
- I believe most systems will boot from CD automatically, see below for a generic \'how to set your pc to boot from cd\'
- http://www.hiren.info/pages/bios-boot-cdrom
4. It might take a little bit, but an Ubuntu Try/Install window will pop up.
- Select \'Try Ubuntu\', nothing will appear to be happening.
- Click the X in the upper left corner of the Try/Install window, it\'s okay if the little disc is still spinning.
- After closing the window, you should see the basic desktop environment.
5. In the upper left corner, select \'Applications -> Accessories -> Terminal\'.
- A command line window will open, type \'sudo apt-get update\' and press enter. Take special care to type everything exactly, including spaces.
- Leave the Terminal window open for now.
6. In the upper left corner, select \'Applications -> Ubuntu Software Center\'.
- The Software Center window will open, select \'Edit - > Software Sources\'.
- A new window should open and default to the furthest left tab.
- Check the box that says \'Community-Maintained Open Source Software (universe)\', then select \'Close\'.
- It will sit there and update for several seconds, select the X in the top left corner of the window when it\'s done.
7. Heading back to the Terminal window.
- Type \'sudo apt-get install gphoto2\' and press enter. Take special care to type everything exactly, including spaces.
- You will be asked to enter \'y/n\' to continue. Type the letter \'y\' on your keyboard and press enter.
8. Connect your camera with a USB cable and turn the camera on.
- From here on, don\'t let your camera fall asleep.
9. In the top left corner, select \'Places -> Canon Digital Camera\'.
- A new window will open, select \'File -> Unmount\'.
- Close the window by selecting the X in the upper left corner.
10. Heading back to the Terminal window.
- Again, make sure your camera hasn\'t gone to sleep.
- Type \'gphoto2 --list-config\' and then press enter. Take special care to type everything exactly, including spaces.
- Type \'gphoto2 --get-config /main/status/shuttercounter\' and press enter.
- You should now see your shutter count displayed inside the Terminal window, it will be displayed as:
Label: Shutter Counter
Type: Text
Current: xxxxx (the xxxxx represents your shutter count)
Make sure you type everything correctly, I missed the space between \'config\' and \'/main\' in Step 10 that caused me some grief.
I\'m starting a new one because right now, you need to pull bits and pieces from several areas, and none of the instructions really hold your hand for someone who isn\'t savvy. If I\'ve missed a step, or a step isn\'t detailed enough, please let me know.
2. Burn the disc. There are a million ways to do this, I like Nero.
- Open Nero and select \'Recorder -> Burn Image\'.
- Navigate to and select the Ubuntu file, then burn.
3. Leave the disc in your drive and restart your computer to boot in Ubuntu.
- I believe most systems will boot from CD automatically, see below for a generic \'how to set your pc to boot from cd\'
- http://www.hiren.info/pages/bios-boot-cdrom
4. It might take a little bit, but an Ubuntu Try/Install window will pop up.
- Select \'Try Ubuntu\', nothing will appear to be happening.
- Click the X in the upper left corner of the Try/Install window, it\'s okay if the little disc is still spinning.
- After closing the window, you should see the basic desktop environment.
5. In the upper left corner, select \'Applications -> Accessories -> Terminal\'.
- A command line window will open, type \'sudo apt-get update\' and press enter. Take special care to type everything exactly, including spaces.
- Leave the Terminal window open for now.
6. In the upper left corner, select \'Applications -> Ubuntu Software Center\'.
- The Software Center window will open, select \'Edit - > Software Sources\'.
- A new window should open and default to the furthest left tab.
- Check the box that says \'Community-Maintained Open Source Software (universe)\', then select \'Close\'.
- It will sit there and update for several seconds, select the X in the top left corner of the window when it\'s done.
7. Heading back to the Terminal window.
- Type \'sudo apt-get install gphoto2\' and press enter. Take special care to type everything exactly, including spaces.
- You will be asked to enter \'y/n\' to continue. Type the letter \'y\' on your keyboard and press enter.
8. Connect your camera with a USB cable and turn the camera on.
- From here on, don\'t let your camera fall asleep.
9. In the top left corner, select \'Places -> Canon Digital Camera\'.
- A new window will open, select \'File -> Unmount\'.
- Close the window by selecting the X in the upper left corner.
10. Heading back to the Terminal window.
- Again, make sure your camera hasn\'t gone to sleep.
- Type \'gphoto2 --list-config\' and then press enter. Take special care to type everything exactly, including spaces.
- Type \'gphoto2 --get-config /main/status/shuttercounter\' and press enter.
- You should now see your shutter count displayed inside the Terminal window, it will be displayed as:
Label: Shutter Counter
Type: Text
Current: xxxxx (the xxxxx represents your shutter count)
Make sure you type everything correctly, I missed the space between \'config\' and \'/main\' in Step 10 that caused me some grief.
