Overall good condition but shows little signs of use here and there. Meter responds to light. Testing indoors with the 40mm f1.4 it matched my meter (ISO400 1/30 F8) but with the pancake lens it was off a few stops so I think it looses linearity at lower light levels. Responding to light but I probably wouldn't really trust it without checking it against a meter in a number of different conditions. Shutter fires fine and timing seems close.
-------------------------------- Item 2: Olympus Pen FT silver
Pen FT in silver. Again overall good condition but shows signs of wear. Chips in viewfinder plastic cover. Testing indoors the meter responded to light but seemed like it would overexpose a stop or 2. You might be able to compensate with the ISO dial but it only goes to 400 so that would really only work with ISO100 or maybe 200 film. Responding to light but I wouldn't really trust it without trying to compensate and checking it against a meter in a number of different conditions. Shutter fires fine and timing seems close.
-------------------------------- Item 3: Pen FT 38mm f2.8 pancake lens
Tiny little thing. Focus is smooth, aperture is a little stiffer to turn. It has a very slight ding in the bottom of the filter ring, might not be able to mount a filter on it. Lens has a fair amount of dust in it but don't see haze or fungus. Comes with original metal lens cap.
Focus and aperture are smooth. Very nice shape overall. Lens has a fair amount of dust in it but don't see haze or fungus. Comes with a 3d printed lens cap.
Focus and aperture are smooth. It looks like an internal element has a chip in it at the edge. By f2 it doesn't look like it would be an issue. Shooting at f1.4 I didn't see impacts in the pictures but it would have been at the edge of the image which was OOF anyway. Lens has a fair amount of dust in it but don't see haze or fungus. Comes with a 3d printed lens cap.
