FS: Linhof Profi-II w/ RRS QR Clamp, Arca Swiss B1, Kirk King Cobra Heads
Item 1: Arca Swiss B1 Ball Head
ITEM SOLD to filipepeixoto
Arca Swiss B1 Ball head with Arca Swiss QR clamp.
Ball head works quite well, like new.
Ball head conservatively rated as 9, but could be 9+. QR clamp has some marks caused by usage and older style screw type lens plate stops and camera stops.
Asking $250 or BO
Specifications:
Finish: Black Enamel
Material: Unspecified
Pan: 360 degrees
Tilt: 90 degrees
Quick Release: Optional (knob and flip lock versions available)
QR Plate: Not included
Camera Mount: 1/4"-20
Tripod Mount: 3/8"-16
Head Height: 11.4 cm / 4.5 in.
Maximum Load Capacity: 40.8 kg / 90 lbs
Weight: 0.77 kg / 1.7 lbs
-------------------------------- Item 2: Linhof Profi-II Ball Head
Linhof Profi-II Ball head with old style Really Right Stuff Arca Swiss Type QR clamp. Since I have moved, I can not find the original screw top. Comes with original box. Used with the included clamp and the 3/8-16 screw which is installed, but not installed with Loctite.
STILL AVAILABLE, PRICE LOWERED
Ball head conservatively rated as 9, but could be 9+. QR clamp has marks caused by usage from older style screw type lens plate and camera stops which can be seen in the photo.
Works quite well, almost like new and used with the Gitzo 1228 Carbon Fiber Mark I Tripod that I also have listed. This made a fine light weight strong travel package.
Asking $200
Maximum Camera Supported Small sized medium format
Load Capacity 17.60 lb (7.98 kg)
Height 4.3" (10.9 cm)
Quick Release No
Spirit Level No
Tension Control Yes
Tripod Mount Thread Size 3/8"-16 (supplied with 1/4"-20 insert)
Weight 1.19 lb (0.54 kg)
-------------------------------- Item 3: Kirk King Cobra Gimbal Head
Kirk King Cobra Gimbal Head with Arca Swiss QR type clamp.
Head conservatively rated as 9, but could be 9+; a little wear on the Arca Swiss Type Clamp.
Head works well, like new.
Asking $250 or BO
Kirk King Cobra SOLD to Terry- classiccd
Load Capacity Any 35mm camera with any telephoto lens
Height 9" (22.8cm)
Quick Release Yes (Arca-Swiss type)
Spirit Level No
Tension Control No
Tripod Mount Thread Size 3/8"
Weight 3 lbs (1.360kg)
From the Kirk Website:
"King Cobra is "rack-and-pinion power steering" for your tripod. By design, King Cobra balances your telephoto lenses perfectly, allowing fingertip control to adjust even the heaviest lens through an infinite range of motion without locking and unlocking the head. You can track moving subjects in an effortless, gliding motion with no jerky stops and starts."
FS: Linhof Profi-II w/ RRS QR Clamp, Arca Swiss B1, Kirk King Cobra Heads
Item 1: Arca Swiss B1 Ball Head
ITEM SOLD to filipepeixoto
Arca Swiss B1 Ball head with Arca Swiss QR clamp.
Ball head works quite well, like new.
Ball head conservatively rated as 9, but could be 9+. QR clamp has some marks caused by usage and older style screw type lens plate stops and camera stops.
Asking $250 or BO
Specifications:
Finish: Black Enamel
Material: Unspecified
Pan: 360 degrees
Tilt: 90 degrees
Quick Release: Optional (knob and flip lock versions available)
QR Plate: Not included
Camera Mount: 1/4"-20
Tripod Mount: 3/8"-16
Head Height: 11.4 cm / 4.5 in.
Maximum Load Capacity: 40.8 kg / 90 lbs
Weight: 0.77 kg / 1.7 lbs
-------------------------------- Item 2: Linhof Profi-II Ball Head
Linhof Profi-II Ball head with old style Really Right Stuff Arca Swiss Type QR clamp. Since I have moved, I can not find the original screw top. Comes with original box. Used with the included clamp and the 3/8-16 screw which is installed, but not installed with Loctite.
STILL AVAILABLE, PRICE LOWERED
Ball head conservatively rated as 9, but could be 9+. QR clamp has marks caused by usage from older style screw type lens plate and camera stops which can be seen in the photo.
Works quite well, almost like new and used with the Gitzo 1228 Carbon Fiber Mark I Tripod that I also have listed. This made a fine light weight strong travel package.
Asking $205 or BO
Maximum Camera Supported Small sized medium format
Load Capacity 17.60 lb (7.98 kg)
Height 4.3" (10.9 cm)
Quick Release No
Spirit Level No
Tension Control Yes
Tripod Mount Thread Size 3/8"-16 (supplied with 1/4"-20 insert)
Weight 1.19 lb (0.54 kg)
-------------------------------- Item 3: Kirk King Cobra Gimbal Head
Kirk King Cobra Gimbal Head with Arca Swiss QR type clamp.
Head conservatively rated as 9, but could be 9+; a little wear on the Arca Swiss Type Clamp.
Head works well, like new.
Asking $250 or BO
Kirk King Cobra SOLD to Terry- classiccd
Load Capacity Any 35mm camera with any telephoto lens
Height 9" (22.8cm)
Quick Release Yes (Arca-Swiss type)
Spirit Level No
Tension Control No
Tripod Mount Thread Size 3/8"
Weight 3 lbs (1.360kg)
From the Kirk Website:
"King Cobra is "rack-and-pinion power steering" for your tripod. By design, King Cobra balances your telephoto lenses perfectly, allowing fingertip control to adjust even the heaviest lens through an infinite range of motion without locking and unlocking the head. You can track moving subjects in an effortless, gliding motion with no jerky stops and starts."
FS: Linhof Profi-II w/ RRS QR Clamp, Arca Swiss B1, Kirk King Cobra Heads
Item 1: Arca Swiss B1 Ball Head
ITEM SOLD to filipepeixoto
Arca Swiss B1 Ball head with Arca Swiss QR clamp.
Ball head works quite well, like new.
Ball head conservatively rated as 9, but could be 9+. QR clamp has some marks caused by usage and older style screw type lens plate stops and camera stops.
Asking $250 or BO
Specifications:
Finish: Black Enamel
Material: Unspecified
Pan: 360 degrees
Tilt: 90 degrees
Quick Release: Optional (knob and flip lock versions available)
QR Plate: Not included
Camera Mount: 1/4"-20
Tripod Mount: 3/8"-16
Head Height: 11.4 cm / 4.5 in.
Maximum Load Capacity: 40.8 kg / 90 lbs
Weight: 0.77 kg / 1.7 lbs
-------------------------------- Item 2: Linhof Profi-II Ball Head
Linhof Profi-II Ball head with old style Really Right Stuff Arca Swiss Type QR clamp. Since I have moved, I can not find the original screw top. Comes with original box. Used with the included clamp and the 3/8-16 screw which is installed, but not installed with Loctite.
STILL AVAILABLE, PRICE LOWERED
Ball head conservatively rated as 9, but could be 9+. QR clamp has marks caused by usage from older style screw type lens plate and camera stops which can be seen in the photo.
Works quite well, almost like new and used with the Gitzo 1228 Carbon Fiber Mark I Tripod that I also have listed. This made a fine light weight strong travel package.
Asking $210 or BO
Maximum Camera Supported Small sized medium format
Load Capacity 17.60 lb (7.98 kg)
Height 4.3" (10.9 cm)
Quick Release No
Spirit Level No
Tension Control Yes
Tripod Mount Thread Size 3/8"-16 (supplied with 1/4"-20 insert)
Weight 1.19 lb (0.54 kg)
-------------------------------- Item 3: Kirk King Cobra Gimbal Head
Kirk King Cobra Gimbal Head with Arca Swiss QR type clamp.
Head conservatively rated as 9, but could be 9+; a little wear on the Arca Swiss Type Clamp.
Head works well, like new.
Asking $250 or BO
Kirk King Cobra SOLD to Terry- classiccd
Load Capacity Any 35mm camera with any telephoto lens
Height 9" (22.8cm)
Quick Release Yes (Arca-Swiss type)
Spirit Level No
Tension Control No
Tripod Mount Thread Size 3/8"
Weight 3 lbs (1.360kg)
From the Kirk Website:
"King Cobra is "rack-and-pinion power steering" for your tripod. By design, King Cobra balances your telephoto lenses perfectly, allowing fingertip control to adjust even the heaviest lens through an infinite range of motion without locking and unlocking the head. You can track moving subjects in an effortless, gliding motion with no jerky stops and starts."
FS: Linhof Profi-II w/ RRS QR Clamp, Arca Swiss B1, Kirk King Cobra Heads
Item 1: Arca Swiss B1 Ball Head
ITEM SOLD to filipepeixoto
Arca Swiss B1 Ball head with Arca Swiss QR clamp.
Ball head works quite well, like new.
Ball head conservatively rated as 9, but could be 9+. QR clamp has some marks caused by usage and older style screw type lens plate stops and camera stops.
Asking $250 or BO
Specifications:
Finish: Black Enamel
Material: Unspecified
Pan: 360 degrees
Tilt: 90 degrees
Quick Release: Optional (knob and flip lock versions available)
QR Plate: Not included
Camera Mount: 1/4"-20
Tripod Mount: 3/8"-16
Head Height: 11.4 cm / 4.5 in.
Maximum Load Capacity: 40.8 kg / 90 lbs
Weight: 0.77 kg / 1.7 lbs
-------------------------------- Item 2: Linhof Profi-II Ball Head
Linhof Profi-II Ball head with old style Really Right Stuff Arca Swiss Type QR clamp. Since I have moved, I can not find the original screw top. Comes with original box. Used with the included clamp and the 3/8-16 screw which is installed, but not installed with Loctite.
STILL AVAILABLE, PRICE LOWERED
Ball head conservatively rated as 9, but could be 9+. QR clamp has marks caused by usage from older style screw type lens plate and camera stops which can be seen in the photo.
Works quite well, almost like new and used with the Gitzo 1228 Carbon Fiber Mark I Tripod that I also have listed. This made a fine light weight strong travel package.
Asking $215 or BO
Maximum Camera Supported Small sized medium format
Load Capacity 17.60 lb (7.98 kg)
Height 4.3" (10.9 cm)
Quick Release No
Spirit Level No
Tension Control Yes
Tripod Mount Thread Size 3/8"-16 (supplied with 1/4"-20 insert)
Weight 1.19 lb (0.54 kg)
-------------------------------- Item 3: Kirk King Cobra Gimbal Head
Kirk King Cobra Gimbal Head with Arca Swiss QR type clamp.
Head conservatively rated as 9, but could be 9+; a little wear on the Arca Swiss Type Clamp.
Head works well, like new.
Asking $250 or BO
Kirk King Cobra SOLD to Terry- classiccd
Load Capacity Any 35mm camera with any telephoto lens
Height 9" (22.8cm)
Quick Release Yes (Arca-Swiss type)
Spirit Level No
Tension Control No
Tripod Mount Thread Size 3/8"
Weight 3 lbs (1.360kg)
From the Kirk Website:
"King Cobra is "rack-and-pinion power steering" for your tripod. By design, King Cobra balances your telephoto lenses perfectly, allowing fingertip control to adjust even the heaviest lens through an infinite range of motion without locking and unlocking the head. You can track moving subjects in an effortless, gliding motion with no jerky stops and starts."
FS: Linhof Profi-II w/ RRS QR Clamp, Arca Swiss B1, Kirk King Cobra Heads
Item 1: Arca Swiss B1 Ball Head
ITEM SOLD to filipepeixoto
Arca Swiss B1 Ball head with Arca Swiss QR clamp.
Ball head works quite well, like new.
Ball head conservatively rated as 9, but could be 9+. QR clamp has some marks caused by usage and older style screw type lens plate stops and camera stops.
Asking $250 or BO
Specifications:
Finish: Black Enamel
Material: Unspecified
Pan: 360 degrees
Tilt: 90 degrees
Quick Release: Optional (knob and flip lock versions available)
QR Plate: Not included
Camera Mount: 1/4"-20
Tripod Mount: 3/8"-16
Head Height: 11.4 cm / 4.5 in.
Maximum Load Capacity: 40.8 kg / 90 lbs
Weight: 0.77 kg / 1.7 lbs
-------------------------------- Item 2: Linhof Profi-II Ball Head
Linhof Profi-II Ball head with old style Really Right Stuff Arca Swiss Type QR clamp. Since I have moved, I can not find the original screw top. Comes with original box. Used with the included clamp and the 3/8-16 screw which is installed, but not installed with Loctite.
STILL AVAILABLE, PRICE LOWERED
Ball head conservatively rated as 9, but could be 9+. QR clamp has marks caused by usage from older style screw type lens plate and camera stops which can be seen in the photo.
Works quite well, almost like new and used with the Gitzo 1228 Carbon Fiber Mark I Tripod that I also have listed. This made a fine light weight strong travel package.
Asking $225 or BO
Maximum Camera Supported Small sized medium format
Load Capacity 17.60 lb (7.98 kg)
Height 4.3" (10.9 cm)
Quick Release No
Spirit Level No
Tension Control Yes
Tripod Mount Thread Size 3/8"-16 (supplied with 1/4"-20 insert)
Weight 1.19 lb (0.54 kg)
-------------------------------- Item 3: Kirk King Cobra Gimbal Head
Kirk King Cobra Gimbal Head with Arca Swiss QR type clamp.
Head conservatively rated as 9, but could be 9+; a little wear on the Arca Swiss Type Clamp.
Head works well, like new.
Asking $250 or BO
Kirk King Cobra SOLD to Terry- classiccd
Load Capacity Any 35mm camera with any telephoto lens
Height 9" (22.8cm)
Quick Release Yes (Arca-Swiss type)
Spirit Level No
Tension Control No
Tripod Mount Thread Size 3/8"
Weight 3 lbs (1.360kg)
From the Kirk Website:
"King Cobra is "rack-and-pinion power steering" for your tripod. By design, King Cobra balances your telephoto lenses perfectly, allowing fingertip control to adjust even the heaviest lens through an infinite range of motion without locking and unlocking the head. You can track moving subjects in an effortless, gliding motion with no jerky stops and starts."
FS: Linhof Profi-II w/ RRS QR Claamp, Arca Swiss B1, Kirk King Cobra Heads
Item 1: Arca Swiss B1 Ball Head
ITEM SOLD to filipepeixoto
Arca Swiss B1 Ball head with Arca Swiss QR clamp.
Ball head works quite well, like new.
Ball head conservatively rated as 9, but could be 9+. QR clamp has some marks caused by usage and older style screw type lens plate stops and camera stops.
Asking $250 or BO
Specifications:
Finish: Black Enamel
Material: Unspecified
Pan: 360 degrees
Tilt: 90 degrees
Quick Release: Optional (knob and flip lock versions available)
QR Plate: Not included
Camera Mount: 1/4"-20
Tripod Mount: 3/8"-16
Head Height: 11.4 cm / 4.5 in.
Maximum Load Capacity: 40.8 kg / 90 lbs
Weight: 0.77 kg / 1.7 lbs
-------------------------------- Item 2: Linhof Profi-II Ball Head
Linhof Profi-II Ball head with old style Really Right Stuff Arca Swiss Type QR clamp. Since I have moved, I can not find the original screw top. Comes with original box. Used with the included clamp and the 3/8-16 screw which is installed, but not installed with Loctite.
STILL AVAILABLE
Ball head conservatively rated as 9, but could be 9+. QR clamp has marks caused by usage from older style screw type lens plate and camera stops which can be seen in the photo.
Works quite well, almost like new and used with the Gitzo 1228 Carbon Fiber Mark I Tripod that I also have listed. This made a fine light weight strong travel package.
Asking $225 or BO
Maximum Camera Supported Small sized medium format
Load Capacity 17.60 lb (7.98 kg)
Height 4.3" (10.9 cm)
Quick Release No
Spirit Level No
Tension Control Yes
Tripod Mount Thread Size 3/8"-16 (supplied with 1/4"-20 insert)
Weight 1.19 lb (0.54 kg)
-------------------------------- Item 3: Kirk King Cobra Gimbal Head
Kirk King Cobra Gimbal Head with Arca Swiss QR type clamp.
Head conservatively rated as 9, but could be 9+; a little wear on the Arca Swiss Type Clamp.
Head works well, like new.
Asking $250 or BO
Kirk King Cobra SOLD to Terry- classiccd
Load Capacity Any 35mm camera with any telephoto lens
Height 9" (22.8cm)
Quick Release Yes (Arca-Swiss type)
Spirit Level No
Tension Control No
Tripod Mount Thread Size 3/8"
Weight 3 lbs (1.360kg)
From the Kirk Website:
"King Cobra is "rack-and-pinion power steering" for your tripod. By design, King Cobra balances your telephoto lenses perfectly, allowing fingertip control to adjust even the heaviest lens through an infinite range of motion without locking and unlocking the head. You can track moving subjects in an effortless, gliding motion with no jerky stops and starts."
Ball head conservatively rated as 9, but could be 9+. QR clamp has some marks caused by usage and older style screw type lens plate stops and camera stops.
Asking $250 or BO
Specifications:
Finish: Black Enamel
Material: Unspecified
Pan: 360 degrees
Tilt: 90 degrees
Quick Release: Optional (knob and flip lock versions available)
QR Plate: Not included
Camera Mount: 1/4"-20
Tripod Mount: 3/8"-16
Head Height: 11.4 cm / 4.5 in.
Maximum Load Capacity: 40.8 kg / 90 lbs
Weight: 0.77 kg / 1.7 lbs
-------------------------------- Item 2: Linhof Profi-II Ball Head
Linhof Profi-II Ball head with old style Really Right Stuff Arca Swiss Type QR clamp. Since I have moved, I can not find the original screw top. Comes with original box. Used with the included clamp and the 3/8-16 screw which is installed, but not installed with Loctite.
STILL AVAILABLE
Ball head conservatively rated as 9, but could be 9+. QR clamp has marks caused by usage from older style screw type lens plate and camera stops which can be seen in the photo.
Works quite well, almost like new and used with the Gitzo 1228 Carbon Fiber Mark I Tripod that I also have listed. This made a fine light weight strong travel package.
Asking $225 or BO
Maximum Camera Supported Small sized medium format
Load Capacity 17.60 lb (7.98 kg)
Height 4.3" (10.9 cm)
Quick Release No
Spirit Level No
Tension Control Yes
Tripod Mount Thread Size 3/8"-16 (supplied with 1/4"-20 insert)
Weight 1.19 lb (0.54 kg)
-------------------------------- Item 3: Kirk King Cobra Gimbal Head
Kirk King Cobra Gimbal Head with Arca Swiss QR type clamp.
Head conservatively rated as 9, but could be 9+; a little wear on the Arca Swiss Type Clamp.
Head works well, like new.
Asking $250 or BO
Kirk King Cobra SOLD to Terry- classiccd
Load Capacity Any 35mm camera with any telephoto lens
Height 9" (22.8cm)
Quick Release Yes (Arca-Swiss type)
Spirit Level No
Tension Control No
Tripod Mount Thread Size 3/8"
Weight 3 lbs (1.360kg)
From the Kirk Website:
"King Cobra is "rack-and-pinion power steering" for your tripod. By design, King Cobra balances your telephoto lenses perfectly, allowing fingertip control to adjust even the heaviest lens through an infinite range of motion without locking and unlocking the head. You can track moving subjects in an effortless, gliding motion with no jerky stops and starts."
FS: Arca Swiss B1, Linhof Profi-II, Kirk King Cobra Heads
Item 1: Arca Swiss B1 Ball Head
ITEM SOLD to filipepeixoto
Arca Swiss B1 Ball head with Arca Swiss QR clamp.
Ball head works quite well, like new.
Ball head conservatively rated as 9, but could be 9+. QR clamp has some marks caused by usage and older style screw type lens plate stops and camera stops.
Asking $250 or BO
Specifications:
Finish: Black Enamel
Material: Unspecified
Pan: 360 degrees
Tilt: 90 degrees
Quick Release: Optional (knob and flip lock versions available)
QR Plate: Not included
Camera Mount: 1/4"-20
Tripod Mount: 3/8"-16
Head Height: 11.4 cm / 4.5 in.
Maximum Load Capacity: 40.8 kg / 90 lbs
Weight: 0.77 kg / 1.7 lbs
-------------------------------- Item 2: Linhof Profi-II Ball Head
Linhof Profi-II Ball head with old style Really Right Stuff Arca Swiss Type QR clamp. Since I have moved, I can not find the original screw top. Comes with original box. Used with the included clamp and the 3/8-16 screw which is installed, but not installed with Loctite.
STILL AVAILABLE
Ball head conservatively rated as 9, but could be 9+. QR clamp has marks caused by usage from older style screw type lens plate and camera stops which can be seen in the photo.
Works quite well, almost like new and used with the Gitzo 1228 Carbon Fiber Mark I Tripod that I also have listed. This made a fine light weight strong travel package.
Asking $225 or BO
Maximum Camera Supported Small sized medium format
Load Capacity 17.60 lb (7.98 kg)
Height 4.3" (10.9 cm)
Quick Release No
Spirit Level No
Tension Control Yes
Tripod Mount Thread Size 3/8"-16 (supplied with 1/4"-20 insert)
Weight 1.19 lb (0.54 kg)
-------------------------------- Item 3: Kirk King Cobra Gimbal Head
Kirk King Cobra Gimbal Head with Arca Swiss QR type clamp.
Head conservatively rated as 9, but could be 9+; a little wear on the Arca Swiss Type Clamp.
Head works well, like new.
Asking $250 or BO
Kirk King Cobra SOLD to Terry- classiccd
Load Capacity Any 35mm camera with any telephoto lens
Height 9" (22.8cm)
Quick Release Yes (Arca-Swiss type)
Spirit Level No
Tension Control No
Tripod Mount Thread Size 3/8"
Weight 3 lbs (1.360kg)
From the Kirk Website:
"King Cobra is "rack-and-pinion power steering" for your tripod. By design, King Cobra balances your telephoto lenses perfectly, allowing fingertip control to adjust even the heaviest lens through an infinite range of motion without locking and unlocking the head. You can track moving subjects in an effortless, gliding motion with no jerky stops and starts."
FS: Arca Swiss B1, Linhof Profi-II, Kirk King Cobra Heads
Item 1: Arca Swiss B1 Ball Head
ITEM SOLD to filipepeixoto
Arca Swiss B1 Ball head with Arca Swiss QR clamp.
Ball head works quite well, like new.
Ball head conservatively rated as 9, but could be 9+. QR clamp has some marks caused by usage and older style screw type lens plate stops and camera stops.
Asking $250 or BO
Specifications:
Finish: Black Enamel
Material: Unspecified
Pan: 360 degrees
Tilt: 90 degrees
Quick Release: Optional (knob and flip lock versions available)
QR Plate: Not included
Camera Mount: 1/4"-20
Tripod Mount: 3/8"-16
Head Height: 11.4 cm / 4.5 in.
Maximum Load Capacity: 40.8 kg / 90 lbs
Weight: 0.77 kg / 1.7 lbs
-------------------------------- Item 2: Linhof Profi-II Ball Head
Linhof Profi-II Ball head with old style Really Right Stuff Arca Swiss Type QR clamp. Since I have moved, I can not find the original screw top. Comes with original box. Used with the included clamp and the 3/8-16 screw which is installed, but not installed with Loctite.
STILL AVAILABLE
Ball head conservatively rated as 9, but could be 9+. QR clamp has marks caused by usage from older style screw type lens plate and camera stops which can be seen in the photo.
Works quite well, almost like new and used with the Gitzo 1228 Carbon Fiber Mark I Tripod that I also have listed. This made a fine light weight strong travel package.
Asking $225 or BO
Maximum Camera Supported Small sized medium format
Load Capacity 17.60 lb (7.98 kg)
Height 4.3" (10.9 cm)
Quick Release No
Spirit Level No
Tension Control Yes
Tripod Mount Thread Size 3/8"-16 (supplied with 1/4"-20 insert)
Weight 1.19 lb (0.54 kg)
-------------------------------- Item 3: Kirk King Cobra Gimbal Head
Kirk King Cobra Gimbal Head with Arca Swiss QR type clamp.
Head conservatively rated as 9, but could be 9+; a little wear on the Arca Swiss Type Clamp.
Head works well, like new.
Asking $250 or BO
Kirk King Cobra SOLD to Terry- classiccd
Load Capacity Any 35mm camera with any telephoto lens
Height 9" (22.8cm)
Quick Release Yes (Arca-Swiss type)
Spirit Level No
Tension Control No
Tripod Mount Thread Size 3/8"
Weight 3 lbs (1.360kg)
From the Kirk Website:
"King Cobra is "rack-and-pinion power steering" for your tripod. By design, King Cobra balances your telephoto lenses perfectly, allowing fingertip control to adjust even the heaviest lens through an infinite range of motion without locking and unlocking the head. You can track moving subjects in an effortless, gliding motion with no jerky stops and starts."
FS: Arca Swiss B1, Linhof Profi-II, Kirk King Cobra Heads
Item 1: Arca Swiss B1 Ball Head
ITEM SOLD to filipepeixoto
Arca Swiss B1 Ball head with Arca Swiss QR clamp.
Ball head works quite well, like new.
Ball head conservatively rated as 9, but could be 9+. QR clamp has some marks caused by usage and older style screw type lens plate stops and camera stops.
Asking $250 or BO
Specifications:
Finish: Black Enamel
Material: Unspecified
Pan: 360 degrees
Tilt: 90 degrees
Quick Release: Optional (knob and flip lock versions available)
QR Plate: Not included
Camera Mount: 1/4"-20
Tripod Mount: 3/8"-16
Head Height: 11.4 cm / 4.5 in.
Maximum Load Capacity: 40.8 kg / 90 lbs
Weight: 0.77 kg / 1.7 lbs
-------------------------------- Item 2: Linhof Profi-II Ball Head
Linhof Profi-II Ball head with old style Really Right Stuff Arca Swiss Type QR clamp. Since I have moved, I can not find the original screw top. Comes with original box. Used with the included clamp and the 3/8-16 screw which is installed, but not installed with Loctite.
Ball head conservatively rated as 9, but could be 9+. QR clamp has marks caused by usage from older style screw type lens plate and camera stops which can be seen in the photo.
Works quite well, almost like new and used with the Gitzo 1228 Carbon Fiber Mark I Tripod that I also have listed. This made a fine light weight strong travel package.
Asking $225 or BO
Maximum Camera Supported Small sized medium format
Load Capacity 17.60 lb (7.98 kg)
Height 4.3" (10.9 cm)
Quick Release No
Spirit Level No
Tension Control Yes
Tripod Mount Thread Size 3/8"-16 (supplied with 1/4"-20 insert)
Weight 1.19 lb (0.54 kg)
-------------------------------- Item 3: Kirk King Cobra Gimbal Head
Kirk King Cobra Gimbal Head with Arca Swiss QR type clamp.
Head conservatively rated as 9, but could be 9+; a little wear on the Arca Swiss Type Clamp.
Head works well, like new.
Asking $250 or BO
Kirk King Cobra SOLD to Terry- classiccd
Load Capacity Any 35mm camera with any telephoto lens
Height 9" (22.8cm)
Quick Release Yes (Arca-Swiss type)
Spirit Level No
Tension Control No
Tripod Mount Thread Size 3/8"
Weight 3 lbs (1.360kg)
From the Kirk Website:
"King Cobra is "rack-and-pinion power steering" for your tripod. By design, King Cobra balances your telephoto lenses perfectly, allowing fingertip control to adjust even the heaviest lens through an infinite range of motion without locking and unlocking the head. You can track moving subjects in an effortless, gliding motion with no jerky stops and starts."
FS: Arca Swiss B1, Linhof Profi-II, Kirk King Cobra Heads
Item 1: Arca Swiss B1 Ball Head
ITEM SOLD to filipepeixoto
Arca Swiss B1 Ball head with Arca Swiss QR clamp.
Ball head works quite well, like new.
Ball head conservatively rated as 9, but could be 9+. QR clamp has some marks caused by usage and older style screw type lens plate stops and camera stops.
Asking $250 or BO
Specifications:
Finish: Black Enamel
Material: Unspecified
Pan: 360 degrees
Tilt: 90 degrees
Quick Release: Optional (knob and flip lock versions available)
QR Plate: Not included
Camera Mount: 1/4"-20
Tripod Mount: 3/8"-16
Head Height: 11.4 cm / 4.5 in.
Maximum Load Capacity: 40.8 kg / 90 lbs
Weight: 0.77 kg / 1.7 lbs
-------------------------------- Item 2: Linhof Profi-II Ball Head
Linhof Profi-II Ball head with old style Really Right Stuff Arca Swiss Type QR clamp. Since I have moved, I can not find the original screw top. Comes with original box. Used with the included clamp and the 3/8-16 screw which is installed, but not installed with Loctite.
Ball head conservatively rated as 9, but could be 9+. QR clamp has marks caused by usage from older style screw type lens plate and camera stops which can be seen in the photo.
Works quite well, almost like new and used with the Gitzo 1228 Carbon Fiber Mark I Tripod that I also have listed. This made a fine light weight strong travel package.
Asking $225 or BO
Maximum Camera Supported Small sized medium format
Load Capacity 17.60 lb (7.98 kg)
Height 4.3" (10.9 cm)
Quick Release No
Spirit Level No
Tension Control Yes
Tripod Mount Thread Size 3/8"-16 (supplied with 1/4"-20 insert)
Weight 1.19 lb (0.54 kg)
-------------------------------- Item 3: Kirk King Cobra Gimbal Head
Kirk King Cobra Gimbal Head with Arca Swiss QR type clamp.
Head conservatively rated as 9, but could be 9+; a little wear on the Arca Swiss Type Clamp.
Head works well, like new.
Asking $250 or BO
Load Capacity Any 35mm camera with any telephoto lens
Height 9" (22.8cm)
Quick Release Yes (Arca-Swiss type)
Spirit Level No
Tension Control No
Tripod Mount Thread Size 3/8"
Weight 3 lbs (1.360kg)
From the Kirk Website:
"King Cobra is "rack-and-pinion power steering" for your tripod. By design, King Cobra balances your telephoto lenses perfectly, allowing fingertip control to adjust even the heaviest lens through an infinite range of motion without locking and unlocking the head. You can track moving subjects in an effortless, gliding motion with no jerky stops and starts."
FS: Arca Swiss B1, Linhof Profi-II, Kirk King Cobra Heads
Item 1: Arca Swiss B1 Ball Head
SALE PENDING to filipepeixoto
Arca Swiss B1 Ball head with Arca Swiss QR clamp.
Ball head works quite well, like new.
Ball head conservatively rated as 9, but could be 9+. QR clamp has some marks caused by usage and older style screw type lens plate stops and camera stops.
Asking $250 or BO
Specifications:
Finish: Black Enamel
Material: Unspecified
Pan: 360 degrees
Tilt: 90 degrees
Quick Release: Optional (knob and flip lock versions available)
QR Plate: Not included
Camera Mount: 1/4"-20
Tripod Mount: 3/8"-16
Head Height: 11.4 cm / 4.5 in.
Maximum Load Capacity: 40.8 kg / 90 lbs
Weight: 0.77 kg / 1.7 lbs
-------------------------------- Item 2: Linhof Profi-II Ball Head
Linhof Profi-II Ball head with old style Really Right Stuff Arca Swiss Type QR clamp. Since I have moved, I can not find the original screw top. Comes with original box. Used with the included clamp and the 3/8-16 screw which is installed, but not installed with Loctite.
Ball head conservatively rated as 9, but could be 9+. QR clamp has marks caused by usage from older style screw type lens plate and camera stops which can be seen in the photo.
Works quite well, almost like new and used with the Gitzo 1228 Carbon Fiber Mark I Tripod that I also have listed. This made a fine light weight strong travel package.
Asking $225 or BO
Maximum Camera Supported Small sized medium format
Load Capacity 17.60 lb (7.98 kg)
Height 4.3" (10.9 cm)
Quick Release No
Spirit Level No
Tension Control Yes
Tripod Mount Thread Size 3/8"-16 (supplied with 1/4"-20 insert)
Weight 1.19 lb (0.54 kg)
-------------------------------- Item 3: Kirk King Cobra Gimbal Head
Kirk King Cobra Gimbal Head with Arca Swiss QR type clamp.
Head conservatively rated as 9, but could be 9+; a little wear on the Arca Swiss Type Clamp.
Head works well, like new.
Asking $250 or BO
Load Capacity Any 35mm camera with any telephoto lens
Height 9" (22.8cm)
Quick Release Yes (Arca-Swiss type)
Spirit Level No
Tension Control No
Tripod Mount Thread Size 3/8"
Weight 3 lbs (1.360kg)
From the Kirk Website:
"King Cobra is "rack-and-pinion power steering" for your tripod. By design, King Cobra balances your telephoto lenses perfectly, allowing fingertip control to adjust even the heaviest lens through an infinite range of motion without locking and unlocking the head. You can track moving subjects in an effortless, gliding motion with no jerky stops and starts."
FS: Arca Swiss B1, Linhof Profi-II, Kirk King Cobra Heads
Item 1: Arca Swiss B1 Ball Head
SALE PENDING
Arca Swiss B1 Ball head with Arca Swiss QR clamp.
Ball head works quite well, like new.
Ball head conservatively rated as 9, but could be 9+. QR clamp has some marks caused by usage and older style screw type lens plate stops and camera stops.
Asking $250 or BO
Specifications:
Finish: Black Enamel
Material: Unspecified
Pan: 360 degrees
Tilt: 90 degrees
Quick Release: Optional (knob and flip lock versions available)
QR Plate: Not included
Camera Mount: 1/4"-20
Tripod Mount: 3/8"-16
Head Height: 11.4 cm / 4.5 in.
Maximum Load Capacity: 40.8 kg / 90 lbs
Weight: 0.77 kg / 1.7 lbs
-------------------------------- Item 2: Linhof Profi-II Ball Head
Linhof Profi-II Ball head with old style Really Right Stuff Arca Swiss Type QR clamp. Since I have moved, I can not find the original screw top. Comes with original box. Used with the included clamp and the 3/8-16 screw which is installed, but not installed with Loctite.
Ball head conservatively rated as 9, but could be 9+. QR clamp has marks caused by usage from older style screw type lens plate and camera stops which can be seen in the photo.
Works quite well, almost like new and used with the Gitzo 1228 Carbon Fiber Mark I Tripod that I also have listed. This made a fine light weight strong travel package.
Asking $225 or BO
Maximum Camera Supported Small sized medium format
Load Capacity 17.60 lb (7.98 kg)
Height 4.3" (10.9 cm)
Quick Release No
Spirit Level No
Tension Control Yes
Tripod Mount Thread Size 3/8"-16 (supplied with 1/4"-20 insert)
Weight 1.19 lb (0.54 kg)
-------------------------------- Item 3: Kirk King Cobra Gimbal Head
Kirk King Cobra Gimbal Head with Arca Swiss QR type clamp.
Head conservatively rated as 9, but could be 9+; a little wear on the Arca Swiss Type Clamp.
Head works well, like new.
Asking $250 or BO
Load Capacity Any 35mm camera with any telephoto lens
Height 9" (22.8cm)
Quick Release Yes (Arca-Swiss type)
Spirit Level No
Tension Control No
Tripod Mount Thread Size 3/8"
Weight 3 lbs (1.360kg)
From the Kirk Website:
"King Cobra is "rack-and-pinion power steering" for your tripod. By design, King Cobra balances your telephoto lenses perfectly, allowing fingertip control to adjust even the heaviest lens through an infinite range of motion without locking and unlocking the head. You can track moving subjects in an effortless, gliding motion with no jerky stops and starts."
FS: Arca Swiss B1, Linhof Profi-II, Kirk King Cobra Heads
Item 1: Arca Swiss B1 Ball Head
Arca Swiss B1 Ball head with Arca Swiss QR clamp.
Ball head works quite well, like new.
Ball head conservatively rated as 9, but could be 9+. QR clamp has some marks caused by usage and older style screw type lens plate stops and camera stops.
Asking $250 or BO
Specifications:
Finish: Black Enamel
Material: Unspecified
Pan: 360 degrees
Tilt: 90 degrees
Quick Release: Optional (knob and flip lock versions available)
QR Plate: Not included
Camera Mount: 1/4"-20
Tripod Mount: 3/8"-16
Head Height: 11.4 cm / 4.5 in.
Maximum Load Capacity: 40.8 kg / 90 lbs
Weight: 0.77 kg / 1.7 lbs
-------------------------------- Item 2: Linhof Profi-II Ball Head
Linhof Profi-II Ball head with old style Really Right Stuff Arca Swiss Type QR clamp. Since I have moved, I can not find the original screw top. Comes with original box. Used with the included clamp and the 3/8-16 screw which is installed, but not installed with Loctite.
Ball head conservatively rated as 9, but could be 9+. QR clamp has marks caused by usage from older style screw type lens plate and camera stops which can be seen in the photo.
Works quite well, almost like new and used with the Gitzo 1228 Carbon Fiber Mark I Tripod that I also have listed. This made a fine light weight strong travel package.
Asking $225 or BO
Maximum Camera Supported Small sized medium format
Load Capacity 17.60 lb (7.98 kg)
Height 4.3" (10.9 cm)
Quick Release No
Spirit Level No
Tension Control Yes
Tripod Mount Thread Size 3/8"-16 (supplied with 1/4"-20 insert)
Weight 1.19 lb (0.54 kg)
-------------------------------- Item 3: Kirk King Cobra Gimbal Head
Kirk King Cobra Gimbal Head with Arca Swiss QR type clamp.
Head conservatively rated as 9, but could be 9+; a little wear on the Arca Swiss Type Clamp.
Head works well, like new.
Asking $250 or BO
Load Capacity Any 35mm camera with any telephoto lens
Height 9" (22.8cm)
Quick Release Yes (Arca-Swiss type)
Spirit Level No
Tension Control No
Tripod Mount Thread Size 3/8"
Weight 3 lbs (1.360kg)
From the Kirk Website:
"King Cobra is "rack-and-pinion power steering" for your tripod. By design, King Cobra balances your telephoto lenses perfectly, allowing fingertip control to adjust even the heaviest lens through an infinite range of motion without locking and unlocking the head. You can track moving subjects in an effortless, gliding motion with no jerky stops and starts."
