Price: $2,300.00 Payment method: PayPal Item condition: 9+ Shows little or no signs of wear Shipping instructions: Seller pays shipping within continental US
Used Nauticam NA-1DXIII Underwater DSLR Housing for Canon 1DX Mark III
This housing is in pristine condition and has only been used lightly. Everything is fully functional and ready to go to support outstanding underwater photography!
Features:
- The NA-1DXIII adds a host of video-centric enhancements and more ergonomics and control access for all shooting situations. With years of experience in creating high-end DSLR housings, Nauticam's cutting-edge engineering process assures the best underwater shooting experience possible.
- The NA-1DXIII is designed specially for the Canon EOS-1D Mark III camera. Nauticam engineers made sure to place the controls on the housing right where you need them to be. Dual-action thumb and recessed levers actuate the AF-ON, REC, M. Fn., ISO, Fn and Pv as well as PLAY and INFO and are easily accessed from the handles.
- This housing has a depth rating of 330ft/100m. It is built around the N120 port system. It supports flash triggering via the built-in fiber-optic bulkheads atop the housing through the use of Nauticam's Manual or TTL flash triggers. This housing also comes with two M14 5-pin Nikonos bulkheads pre-installed along with a Canon to dual Nikonos bulkhead hot-shoe cable for electronic strobe triggering.
- The large 120mm housing port opening allows even the largest popular pro Canon wide angle lens (11-24mm f/4) to be used, and the camera can even be mounted in the housing with this large lens attached.
- The vacuum check and leak detection system is shipped with NA-1DXIII as standard equipment. Combined with an accessory vacuum valve (PN 25625 for M16 or 25624 for M14), this monitoring system provides constant updates on the water tight status of the housing.
Nauticam Underwater Housing NA-1DXIII
