Home · Register · Join Upload & Sell

  

  Previous versions of Matthew Cham's message #12705985 « Really Right Stuff B2 LLR II Quick Release Clamp RRS lever »
  

Matthew Cham
Offline
Upload & Sell: Off
FS: Sold: Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Really Right Stuff B2 LLR II Quick Release Lever Clamp

The RRS B2-LLR-II clamp has been sold to user bob_wfmc.

The ballhead is still available, but the ad has been moved here with new photos of just the ballhead (without RRS clamp):
https://www.fredmiranda.com/forum/topic/1344419

This is a MINT Really Right Stuff RRS B2 LLR II quick release lever clamp,
a high end model that fits standard Wimberley lens plates and lens feet.




















Price: $100.00
Payment method: PayPal
Item condition: 10


Feb 07, 2015 at 10:35 PM
Matthew Cham
Offline
Upload & Sell: Off
FS: Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Really Right Stuff B2 LLR II Quick Release Lever Clamp

The RRS B2-LLR-II clamp has been sold to user bob_wfmc.

The ballhead is still available, but the ad has been moved here with new photos of just the ballhead (without RRS clamp):
https://www.fredmiranda.com/forum/topic/1344419

This is a MINT Really Right Stuff RRS B2 LLR II quick release lever clamp,
a high end model that fits standard Wimberley lens plates and lens feet.




















Price: $100.00
Payment method: PayPal
Item condition: 10


Feb 03, 2015 at 08:24 PM
Matthew Cham
Offline
Upload & Sell: Off
FS: Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Really Right Stuff B2 LLR II Quick Release Lever Clamp

The RRS B2-LLR-II clamp has been sold to user bob_wfmc.

The ballhead is still available, but the ad has been moved here with new photos of just the ballhead (without RRS clamp):
https://www.fredmiranda.com/forum/topic/1332591

This is a MINT Really Right Stuff RRS B2 LLR II quick release lever clamp,
a high end model that fits standard Wimberley lens plates and lens feet.




















Price: $100.00
Payment method: PayPal
Item condition: 10


Feb 02, 2015 at 10:57 PM
Matthew Cham
Offline
Upload & Sell: Off
FS: Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Really Right Stuff B2 LLR II Quick Release Lever Clamp

The RRS B2-LLR-II clamp has been sold to user bob_wfmc.

The ballhead is still available, but the ad has been moved here with new photos of just the ballhead (without RRS clamp):
https://www.fredmiranda.com/forum/topic/1332591

This is a MINT Really Right Stuff RRS B2 LLR II quick release lever clamp,
a high end model that fits standard Wimberley lens plates and lens feet.




















Price: $100.00
Payment method: PayPal
Item condition: 10


Feb 01, 2015 at 09:41 PM
Matthew Cham
Offline
Upload & Sell: Off
FS: SOLD: Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Really Right Stuff B2 LLR II Quick Release Lever Clamp

The RRS B2-LLR-II clamp has been sold to user bob_wfmc.

The ballhead is still available, but the ad has been moved here with new photos of just the ballhead (without RRS clamp):
https://www.fredmiranda.com/forum/topic/1332591

This is a MINT Really Right Stuff RRS B2 LLR II quick release lever clamp,
a high end model that fits standard Wimberley lens plates and lens feet.




















Price: $100.00
Payment method: PayPal
Item condition: 10


Feb 01, 2015 at 11:46 AM
Matthew Cham
Offline
Upload & Sell: Off
FS: Sold: Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Really Right Stuff B2 LLR II Quick Release Lever Clamp

The RRS B2-LLR-II clamp has been sold to user bob_wfmc.

The ballhead is still available, but the ad has been moved here with new photos of just the ballhead (without RRS clamp):
https://www.fredmiranda.com/forum/topic/1332591

This is a MINT Really Right Stuff RRS B2 LLR II quick release lever clamp,
a high end model that fits standard Wimberley lens plates and lens feet.




















Price: $100.00
Payment method: PayPal
Item condition: 10


Jan 27, 2015 at 07:42 PM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Really Right Stuff B2 LLR II Quick Release Lever Clamp

The RRS B2-LLR-II clamp has been sold to user bob_wfmc.

The ballhead is still available, but the ad has been moved here with new photos of just the ballhead (without RRS clamp):
https://www.fredmiranda.com/forum/topic/1332591

This is a MINT Really Right Stuff RRS B2 LLR II quick release lever clamp,
a high end model that fits standard Wimberley lens plates and lens feet.




















Price: $100.00
Payment method: PayPal
Item condition: 10


Jan 27, 2015 at 07:41 PM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Really Right Stuff B2 LLR II Quick Release Lever Clamp

The RRS B2-LLR-II clamp has been sold to user bob_wfmc.

The ballhead is still available, but the ad has been moved here with new photos of just the ballhead (without RRS clamp):
https://www.fredmiranda.com/forum/topic/1332591

This is a MINT Really Right Stuff RRS B2 LLR II quick release lever clamp,
a high end model that fits standard Wimberley lens plates and lens feet.




















Price: $100
Payment method: PayPal
Item condition: 10


Jan 26, 2015 at 10:12 AM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

The RRS B2-LLR-II clamp has been sold to user bob_wfmc.
Only the Markins M20/Q20 ballhead is available now. The ad has been reflected to show this.
Will upload new photos soon to reflect this as well.

This is a MINT Markins M20 ball head (now called Q20). This item is the equivalent of
the current model called "Markins Q20".

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.




















Price: $310.00
Payment method: PayPal
Item condition: 10
Jan 26, 2015 at 10:11 AM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

The RRS B2-LLR-II clamp has been sold to user bob_wfmc.
Only the Markins M20/Q20 ballhead is available now. The ad has been reflected to show this.
Will upload new photos soon to reflect this as well.

This is a MINT Markins M20 ball head (now called Q20). This item is the equivalent of
the current model called "Markins Q20".

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.




















Price: $479.00
Payment method: PayPal
Item condition: 10
Jan 25, 2015 at 06:17 PM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $479.00
Payment method: PayPal
Item condition: 10
Jan 24, 2015 at 10:10 AM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $479.00
Payment method: PayPal
Item condition: 10
Jan 24, 2015 at 10:04 AM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $479.00
Payment method: PayPal
Item condition: 10
Jan 21, 2015 at 08:06 PM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $479.00
Payment method: PayPal
Item condition: 10
Jan 20, 2015 at 07:32 AM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $480.00
Payment method: PayPal
Item condition: 10
Jan 20, 2015 at 07:32 AM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $480.00
Payment method: PayPal
Item condition: 10
Jan 19, 2015 at 01:20 PM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $485.00
Payment method: PayPal
Item condition: 10
Jan 19, 2015 at 12:02 PM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $485.00
Payment method: PayPal
Item condition: 10
Jan 18, 2015 at 08:06 AM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $479.00
Payment method: PayPal
Item condition: 10
Jan 13, 2015 at 11:23 PM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $480.00
Payment method: PayPal
Item condition: 10
Jan 08, 2015 at 12:53 PM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $480.00
Payment method: PayPal
Item condition: 10
Dec 27, 2014 at 10:09 AM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $480.00
Payment method: PayPal
Item condition: 10
Dec 24, 2014 at 11:56 AM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $480.00
Payment method: PayPal
Item condition: 10
Dec 21, 2014 at 06:41 PM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $480.00
Payment method: PayPal
Item condition: 10
Dec 19, 2014 at 09:57 AM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $480.00
Payment method: PayPal
Item condition: 10
Dec 19, 2014 at 09:17 AM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $480.00
Payment method: PayPal
Item condition: 10
Dec 14, 2014 at 05:44 PM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $480.00
Payment method: PayPal
Item condition: 10
Dec 10, 2014 at 10:38 PM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $480.00
Payment method: PayPal
Item condition: 10
Dec 10, 2014 at 04:45 PM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $480.00
Payment method: PayPal
Item condition: 10
Dec 09, 2014 at 08:47 PM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $480.00
Payment method: PayPal
Item condition: 10
Dec 09, 2014 at 08:39 PM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $460.00
Payment method: PayPal
Item condition: 10
Dec 08, 2014 at 06:39 PM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $460.00
Payment method: PayPal
Item condition: 10
Dec 08, 2014 at 06:33 PM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $460.00
Payment method: PayPal
Item condition: 10
Dec 08, 2014 at 06:22 PM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $460.00
Payment method: PayPal
Item condition: 10
Dec 07, 2014 at 08:56 PM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $460.00
Payment method: PayPal
Item condition: 10
Dec 07, 2014 at 08:40 AM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $460.00
Payment method: PayPal
Item condition: 10
Dec 06, 2014 at 08:03 AM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $460.00
Payment method: PayPal
Item condition: 10
Dec 04, 2014 at 06:06 PM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $470.00
Payment method: PayPal
Item condition: 10
Dec 03, 2014 at 08:16 AM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $470.00
Payment method: PayPal
Item condition: 10
Dec 01, 2014 at 07:00 PM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $470.00
Payment method: PayPal
Item condition: 10
Dec 01, 2014 at 06:50 PM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $485.00
Payment method: PayPal
Item condition: 10
Nov 29, 2014 at 09:19 PM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $485.00
Payment method: PayPal
Item condition: 10
Nov 27, 2014 at 02:18 PM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $485.00
Payment method: PayPal
Item condition: 10
Nov 25, 2014 at 07:47 AM
Matthew Cham
Offline
Upload & Sell: Off
FS: Markins M20 Q20 Q20i Ballhead Really Right Stuff B2 LLR II Quick Release Clamp RRS lever


Item 1: Markins M20 (now called Q20 / Q20i ) Ballhead + Really Right Stuff B2 LLR II Quick Release Lever Clamp

This is a MINT Markins M20 ball head (now called Q20/Q20i) with Really Right Stuff lever
clamp mount. This item is the equivalent of the current model called "Markins Q20i with
lever release". This item is actually better than the "Markins Q20i lever" because the
included Really Right Stuff B2 LLR II clamp has a longer plate, giving maximum clamping
power for your heaviest lenses. The lever style clamp is best because it allows you to
rapidly and securely lock or unlock the clamp, instead of slowly turning a screw knob
and not knowing if it is tight enough and wasting time checking for adequate tightness.

The Markins M20 (now called Q20) is very special because its weighs so little (only 1.5 lbs)
yet has a rated load capacity of 110 pounds!!! Many other inferior ball heads weigh so much
more and can barely support super telephoto lenses attached to a pro DSLR.
If the ballhead is too heavy it will be harder to carry around during your adventures.
If the ballhead load capacity is too low, your telephoto will not lock securely into position
and may even tip over your tripod or smash your lens. The included Really Right Stuff RRS
quick release lever clamp is a high end model that fits standard Wimberley lens plates and
lens feet.

Do your research and look for the ballhead with highest ratio of load capacity to unit weight,
and this product really shines above others. Rarely seen here on FM because people who
buy them tend to keep them. I'm only selling because I have a few of these and this is an
extra that I have never used. The RRS clamp has not been glued to the Markins ball head,
so you can detach them if needed, or glue them together with locktite if you prefer.





















Price: $485.00
Payment method: PayPal
Item condition: 10
Nov 25, 2014 at 07:47 AM





  Previous versions of Matthew Cham's message #12705985 « Really Right Stuff B2 LLR II Quick Release Clamp RRS lever »
 




This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.