Scott Stoness Offline Upload & Sell: On
|
lighthound wrote:
I thought someone reported that you could assign a button to toggle pre-capture on-off using reg / recall? Is this not true?
My understanding is that you have to go into the menu and select enable pre capture.
Further my understanding is that you cannot program a button to toggle on and off.
There are now a number of items I will be juggling when shooting, landscape EFCS vs wildlife electronic, FPS max, CRAW vs Raw, precapture vs not, ... . And there are only 3 still C1,C2, C3
Which leaves you with several possible solutions.
1) Create a favourite menu with fps, craw on/off, precapture on/off, fps, format ... and leave it as your last item opened on your menu when you are shooting wildlife
2) Program C1 to be precapture, C2 to be non precapture etc. fps
3) Do it manually as needed off/on
4) Program a button to bring up the precapture on/off option - I think this can be done
5) You could have a different C1,C2,C3 depending on intent - load them on your card and upload them depending on your goals
6) Buy multiple camera - one for landscape and one for wildlife so that you have two still C1,C2,C3 (keep my R5 and get a bigger camera case that houses my r8, r5, R5ii, and R7 pending).
I am planning to do 1. There are now so many options - CRAWvsRaw, Eye vs spot, PreCapture or not, fps. And I won't use them much so if I put them in one favourite menu - it will be easy to remember. As well I use my camera for Landscape and Wildlife and have C1, C2, C3 programmed to C1 - On Tripod, iso100, EFCS, f11, AEB... C2 Electronic, AEB, AutoISO, F8 and C3 - RAW, continuous, spot focus, non precapture, 15fps. I will duplicate the C1,C2,C3 in Favourites. I won't remember special buttons in the heat of the moment anyway. There is an option to change c1 (c2,c3) when you make any changes permanently - I won't do this because it risks being in the wrong mode in the heat of the moment, when a Sasquatch comes out of the bush for 1/2 s.
|